Cisco Room USB Touch 10 Kit CS-R-USB-T10-KIT – Controller Kit for the Room USB Upgrade

Product Overview

CS-R-USB-T10-KIT is the Cisco Touch 10 kit for the Room USB upgrade. It is not a standalone video product: it is the control-surface part of the path Cisco documented for converting a Cisco Webex Room USB from a plain USB peripheral into a registered Cisco endpoint, alongside the L-ROOM-USB-UPG= product key and the CS-R-USB-UPG-BUN upgrade bundle. Cisco announced end-of-life for the Room USB line on 30 April 2024 with end-of-sale on 18 June 2024, and states that no replacement is currently available for the Room USB upgrade parts CS-R-USB-T10-KIT, CS-R-USB-UPG-BUN and L-ROOM-USB-UPG=.

Product Description

The upgrade exists because the Room USB as shipped is a USB camera, microphone and speaker for a connected computer rather than a registered room system. Adding the product key and a Touch 10 turns the same hardware into a controlled endpoint with its own touch interface, which changes how the room is booked, dialled and managed. For an estate that bought Room USB units for BYOD huddle spaces and later decided to bring them under central call control, this kit is the missing piece.

The Room USB provides a dedicated RJ-45 Ethernet port for Cisco Touch 10 pairing alongside its 10/100/1000 LAN port, so the controller has a defined connection point on the bar. Software support on the host unit starts at Cisco Collaboration Endpoint Software 9.12.1 or Cisco Webex RoomOS February 2020 Drop 2. Cisco does not publish the call-control specifics that apply after the product-key upgrade on the Room USB data sheet, so confirm the registration model you intend to use before committing to the conversion.

Because Cisco names no replacement for the upgrade parts, availability of this kit is limited to existing stock. If the objective is a registered small-room endpoint rather than a conversion of installed hardware, Cisco's named migration product for the Room USB itself is the Cisco Room Bar (CS-BAR-T-K9 with Navigator and table stand). Browse device and room control for current control surfaces, small room collaboration for huddle-room systems, and Cisco for the wider range.

Key Features

• Part of Cisco's documented upgrade path — Cisco published the Room USB product key L-ROOM-USB-UPG= and the CS-R-USB-UPG-BUN upgrade bundle alongside this Touch 10 kit as the route from USB peripheral to registered Cisco endpoint.
• Adds a dedicated control surface — A touch controller replaces reliance on the supplied remote and the connected laptop, which is what a centrally managed room needs.
• Defined connection point on the bar — The Room USB provides a dedicated RJ-45 Ethernet port for Cisco Touch 10 pairing separate from its LAN port, so the controller has a documented cabling path.
• Preserves the installed hardware — Upgrading an existing Room USB avoids replacing a working camera, microphone and speaker bar in a huddle space.
• Known software floor on the host unit — The Room USB requires Cisco Collaboration Endpoint Software 9.12.1 or later, or Webex RoomOS February 2020 Drop 2 or later, which gives a clear pre-upgrade check.
• Limited availability part — Cisco states no replacement is currently available for the Room USB upgrade parts, so remaining stock is the only source for this conversion.

Typical Applications

• Huddle room — Room USB huddle spaces being brought under central call control are the specific case for this kit.
• Commercial meeting space — Bookable small rooms gain a touch control surface rather than depending on a user's laptop.
• Training room — A small breakout room can be converted from BYOD use to a managed endpoint without replacing the bar.

Technical Specifications