Cisco CS-BRD55P-WSA= – Board Pro 55 Wall Stand Adapter Spare

Product Overview

Brackets get damaged during removal, and adapter kits go missing between a decommissioned room and a new one. CS-BRD55P-WSA= is the spare designation of the Board Pro 55 wall stand adapter kit, ordered as a replacement part.

Cisco lists this part in the Board Pro 55 mounting spares alongside the wall mount kit, wall stand, floor stand and wheel upgrade kit equivalents.

It is mounting hardware only. The board, camera and electronics are not part of this order.

Product Description

The common reason to order this SKU is a relocation. A board comes off a wall stand in one building, the adapter kit does not survive the move intact, and the receiving room needs the same interface before the board can be hung again.

The second reason is stock control. Sites that carry a spare board for break/fix work often find the mounting hardware is the item that actually delays the swap, because it is easy to assume it is reusable and awkward to source at short notice.

Weights are published, so the structural check does not need to be repeated from scratch: 5.0 kg for the wall stand adapter kit on the G2 and G3 generations, against a board-only weight of 40 kg on G1 and G2 and 40.5 kg on G3. Cisco does not publish a VESA pattern for the Board Pro, so a third-party bracket is not a substitute.

Other mounting hardware is listed in display mounts; the boards this kit supports are in interactive displays.

Key Features

• Spare part designation — The trailing equals sign marks the kit as a service part ordered against an existing deployment.
• Wall stand interface only — The kit adapts a Cisco Board Pro 55 to a wall stand and contains no display electronics.
• Published weight for load checks — Cisco lists the wall stand adapter kit at 5.0 kg for the G2 and G3 generations.
• Matched to the Cisco mounting set — Cisco publishes spare part numbers for the wall mount kit, wall stand, floor stand, wheel upgrade kit and this adapter, so the mounting build stays inside one supported family.

Typical Applications

• Conference room — Reinstating a board on a wall stand after a room change or a damaged bracket.
• Commercial meeting space — Estates relocating boards between buildings hold mounting spares alongside the units.
• Multi-purpose room — Rooms reconfigured between uses need mounting hardware available on short notice.

Technical Specifications

Frequently Asked Questions

What does the trailing equals sign mean?

Cisco uses it to designate a spare or service part, ordered as a replacement rather than as part of a new system.

Does this include the wall stand itself?

No. This is the wall stand adapter kit. Cisco lists the wall stand as a separate part number, CS-BRD55P-WS.

Which boards does it fit?

It is the Board Pro 55 wall stand adapter kit. Cisco publishes separate mounting part numbers for the 75-inch model.

What weight does the kit add?

Cisco lists 5.0 kg for the wall stand adapter kit on the G2 and G3 generations.

Can a generic VESA bracket be used instead?

Cisco does not publish a VESA mount pattern for this family, so the published Cisco mounting kits are the documented method.

What warranty applies?

Warranty is handled per Cisco's standard terms for this product class. Contact Creation Networks to confirm coverage for your order.