Cisco CS-BRD55P-WSA – Board Pro 55 Wall Stand Adapter Kit

Product Overview

CS-BRD55P-WSA is a mounting accessory, not a display. It is the wall stand adapter kit for the Cisco Board Pro 55, the interface hardware between the board and a Cisco wall stand.

Cisco publishes a wall stand adapter kit weight of 5.0 kg for the G2 and G3 generations, which is the figure to add to the 40 kg board weight when the wall loading is calculated.

Order it when the room design calls for a wall stand rather than the wall mount kit that ships with the board by default.

Product Description

Cisco documents four mounting paths for the Board Pro 55: the wall mount kit that ships in the carton by default, a wall stand, a floor stand and a wheel upgrade kit for that floor stand. Choosing a wall stand or floor stand removes the wall mount kit from the order, so the adapter kit becomes a line item rather than an optional extra.

The relevant numbers for a structural review are published. The board alone is 40 kg on the G1 and G2 generations and 40.5 kg on the G3, the wall mount is 4.5 kg and this adapter kit is 5.0 kg. Cisco does not publish a VESA pattern for this family, so the mounting interface is the Cisco kit rather than a generic bracket.

Specify the adapter at design stage rather than at delivery. A board arriving without the correct mounting interface is a return visit, and on a 40 kg panel that visit needs two people and a clear route.

Related mounting hardware for this and other displays is listed in display mounts, and the boards themselves in interactive displays.

Key Features

• Wall stand interface for the Board Pro 55 — The kit adapts the board to a Cisco wall stand build rather than the default wall mount kit.
• Published kit weight — Cisco lists 5.0 kg for the wall stand adapter kit on the G2 and G3 generations, so total wall load can be calculated before install.
• Part of a documented mounting family — Cisco publishes wall mount kit, wall stand, floor stand and wheel upgrade kit part numbers for the Board Pro 55, which keeps the mounting decision inside one supported set.
• Required when the default mount is dropped — The wall mount kit is no longer included when a floor stand or wall stand is selected, so the adapter has to be ordered explicitly.

Typical Applications

• Conference room — Rooms where a wall stand is preferred to a fixed wall mount for cable management and serviceability.
• Training room — Spaces where the board position may be revised during fit-out benefit from a stand-based build.
• Government space — Fit-outs with restrictions on wall penetrations often specify a stand rather than a direct mount.

Technical Specifications

Frequently Asked Questions

Is this a display or an accessory?

It is an accessory. CS-BRD55P-WSA is the wall stand adapter kit only, with no board, camera or electronics included.

When is the adapter kit required?

When the board is mounted on a Cisco wall stand. Cisco states the wall mount kit is no longer included when a floor stand or wall stand is selected.

What weight should be allowed for?

Cisco publishes 5.0 kg for the wall stand adapter kit on the G2 and G3 generations, alongside a board-only weight of 40 kg for the G1 and G2 Board Pro 55 and 40.5 kg for the G3.

Does the Board Pro 55 use a VESA mount pattern?

Cisco does not publish a VESA pattern for this family. Mounting is by the Cisco kits listed in the ordering information.

What are the other mounting part numbers?

Cisco lists CS-BRD55P-WMK (wall mount kit), CS-BRD55P-WS (wall stand), CS-BRD55P-FS (floor stand) and CS-BRD55P-WUK (wheel upgrade kit), with spare equivalents.

What warranty applies?

Warranty is handled per Cisco's standard terms for this product class. Contact Creation Networks to confirm coverage for your order.