Christie 4K HDBaseT Extension Card - 140-138103-01

Product Overview

The Christie 4K HDBaseT Extension Card (140-138103-01) adds 4K HDBaseT input capability to the Christie 4K10-HS and 4K7-HS projectors. HDBaseT carries video over standard category cabling, allowing long source-to-projector runs without active extenders at each end. The card installs in the projector's option slot per Christie's accessory architecture. It is the vendor-specified HDBaseT solution for these HS Series 1DLP laser platforms.

Product Description

The 4K10-HS and 4K7-HS are high-brightness 1DLP laser projectors often installed far from the equipment rack — on ceilings, truss, or in projection booths. This extension card gives those projectors a native 4K HDBaseT input, so source signals can travel over structured category cabling directly into the projector rather than terminating at an external receiver. That removes a powered device (and its failure point) from the ceiling, simplifies cable pathways, and uses the twisted-pair infrastructure many buildings already have in place. Per Christie vendor data, the card is designated to support the 4K10-HS and 4K7-HS models. For integrators standardizing on HDBaseT distribution across classrooms, boardrooms, and venues, the card keeps the projector end of the link clean and serviceable. Find more Christie input cards and accessories in our Christie Digital collection.

Key Features

• 4K HDBaseT Input — brings 4K-capable HDBaseT connectivity directly into the projector.
• Specified for 4K10-HS and 4K7-HS — vendor-designated for Christie's HS Series 4K 1DLP laser projectors.
• Category-Cable Transport — long signal runs over structured twisted-pair cabling.
• No External Receiver at the Projector — eliminates a powered extender box at the mounting position.
• Option-Card Installation — installs in the projector's accessory card architecture.

Typical Applications

Used in installed AV systems built on Christie 4K10-HS and 4K7-HS projectors — auditoriums, lecture halls, houses of worship, and corporate venues where sources are racked far from the projector and distributed over HDBaseT category cabling.

Technical Specifications

Specifications sourced from Christie vendor data. Unlisted values are omitted rather than estimated.

Frequently Asked Questions

Which projectors accept this card?

Christie designates the 140-138103-01 card to support the 4K10-HS and 4K7-HS projectors.

What does HDBaseT give me over HDMI?

HDBaseT carries the signal over standard category cabling, supporting much longer runs from rack to projector than passive HDMI and eliminating the need for an external receiver at the projector position.

Does it support 4K signals?

Yes — it is Christie's 4K HDBaseT extension card for these HS Series models per vendor data.

Is installation difficult?

The card installs in the projector's option-card slot following Christie's standard accessory procedure. Contact Creation Networks if you need help confirming fit or planning the cable run.