Chief K1C220 Reduced Height Slv - K1C220SXRH

Product Overview

The Chief K1C220SXRH is a silver, TAA-compliant column mount for single large-format displays in commercial AV environments. It is a variant of the K1C220 column mount product family, sharing the same structural platform with a silver finish and TAA (Trade Agreements Act) compliance certification for U.S. government and federally-funded installations. The XRH designation indicates the silver finish, TAA-compliant variant within the K1C220 line. Like all K1C220 variants, it is designed for floor-to-ceiling column installations in lobbies, meeting rooms, and open commercial spaces where a freestanding pole mount provides a clean, cable-managed display presence.

Product Description

The K1C220SXRH is part of Chief's K1C220 column mount system, a floor-to-ceiling tensioned pole designed to support a single large-format display in commercial settings. The column system accommodates ceiling heights from 8 to 10 feet (2438–3048 mm) in standard configuration, and supports displays up to 200 lbs (90.7 kg). It accepts displays with VESA hole patterns from 200x200 mm to 600x400 mm. Tilt adjustment is available up to ±5° for viewing angle optimization. The silver finish coordinates with modern commercial interiors and matches other Chief silver-finish accessories. The TAA compliance certification on the SXRH variant makes it procurement-eligible for U.S. federal, state, and local government projects operating under FAR/DFAR guidelines. Cable management is integrated into the column design, keeping signal and power routing concealed for a finished installation appearance. Available at Creation Networks with expert AV pre-sales support.

Key Features

• TAA compliant — Eligible for U.S. federal and government-funded AV procurement under Trade Agreements Act requirements.
• Silver finish — Coordinates with modern commercial interiors and Chief silver-finish display accessories.
• 200 lb display capacity — Supports large-format commercial displays up to 90.7 kg on a single column.
• VESA 200x200 to 600x400 mm — Accommodates the VESA hole patterns found on most commercial large-format displays.
• ±5° tilt adjustment — Fine-tunes display angle for optimal viewer sightlines after installation.
• Integrated cable management — Routes signal and power cables within the column for a clean finished appearance.
• 8–10' ceiling height range — Standard column length spans 2438–3048 mm ceiling heights.

Typical Applications

• U.S. government and federally-funded AV installations requiring TAA-compliant hardware
• Corporate lobby and reception display columns
• Conference room and boardroom freestanding display installations
• Open-plan office collaboration displays
• Higher education and public sector AV deployments

Technical Specifications

Frequently Asked Questions

Q: What does TAA compliant mean for this product?
TAA (Trade Agreements Act) compliance means the K1C220SXRH is manufactured in a TAA-designated country, making it eligible for U.S. federal government procurement under GSA contracts and other government purchasing programs governed by FAR/DFAR rules.

Q: How does K1C220SXRH differ from K1C220S?
Both are silver-finish K1C220 column mounts. The SXRH variant carries TAA compliance certification; the K1C220S does not. All other specifications are the same.

Q: What ceiling height does the K1C220SXRH support?
The standard column configuration covers 8 to 10 feet (2438–3048 mm) ceiling heights.

Q: Can this column mount be used with a reduced-height ceiling?
The K1C220 column system is designed for 8–10 ft ceilings in standard configuration. For lower ceiling heights, contact Creation Networks to discuss reduced-height column options.

Q: What warranty applies to this product?
This product is covered under the Legrand AV / Chief manufacturer warranty. Contact Creation Networks directly for current warranty terms and support.