AVPro Edge MXNet 1G Evolution II Encoder ---NOT COMPATIBLE WITH V1 SYSTEMS; TAA Compliant; Made in the USA

Product Overview

The AVPro Edge MXNet 1G Evolution II Encoder (AC-MXNET-1G-EV2-TAA) is a professional AV-over-IP encoder designed for large-scale, enterprise-grade video distribution over standard 1 Gigabit Ethernet infrastructure. Built exclusively for the MXNet Evolution II ecosystem, it is not compatible with first-generation MXNet V1 systems — installers upgrading existing V1 deployments must replace both encoders and decoders. TAA compliant and manufactured in the USA, this encoder is an appropriate choice for government facilities, federal contractors, and DoD integrators sourcing Buy American Act-compliant AV-over-IP solutions for secure or regulated environments.

Product Description

The MXNet 1G EV2 Encoder transmits 4K60 4:4:4 HDR video across a standard 1G managed network with near-zero latency, using AVPro Edge's proprietary compression optimized for the Evolution II platform. Each unit encodes a single HDMI source and places it on the network for distribution to any number of MXNet EV2 Decoders, enabling fully scalable many-to-many AV-over-IP matrix configurations without dedicated matrix switch hardware. USB, RS232, and IR control pass-through allow integrators to extend device control from the display end back to the source rack, simplifying cabling in large installations. The encoder is powered via PoE, reducing the need for separate power supplies at the rack or wall plate, and is managed through the AVPro Edge MXNet control software for centralized system configuration and switching.

Key Features

• 4K60 4:4:4 HDR Encoding — Transmits full-bandwidth 4K video with HDR10 and HLG support over 1G networks.
• MXNet EV2 Exclusive — Designed solely for the MXNet 1G Evolution II platform; not compatible with V1 systems.
• TAA Compliant — Meets Trade Agreements Act requirements for government and federal procurement.
• Made in the USA — Domestically manufactured for quality assurance and regulatory compliance.
• Near-Zero Latency — AVPro Edge's EV2 compression delivers real-time switching performance suitable for live switching applications.
• USB, RS232, IR Pass-Through — Extends device control signals from decoder location back to source, eliminating redundant control runs.
• PoE Powered — Draws power from the network switch, simplifying rack and wall-plate installations.
• Scalable Matrix Architecture — Pair any number of encoders with any number of decoders for a fully software-defined matrix.
• Centralized Management — Configured and switched through the AVPro Edge MXNet control platform.

Typical Applications

• Government and federal facility AV distribution requiring TAA and Buy American Act compliance
• Corporate headquarters with large-scale multi-zone display networks
• Higher education lecture capture and multi-room video distribution
• Broadcast and production facilities requiring low-latency source distribution
• Command-and-control centers with real-time switching requirements
• Houses of worship with multi-screen distributed video systems

Technical Specifications

Competitor Comparison

Frequently Asked Questions

Is this encoder compatible with my existing MXNet V1 system?

No. The MXNet 1G Evolution II Encoder is exclusively compatible with the MXNet EV2 platform. It will not interoperate with first-generation MXNet encoders, decoders, or controllers. A complete system replacement is required when upgrading from V1 to EV2.

Does this encoder require a special network switch?

The MXNet EV2 platform operates on standard 1G managed Ethernet switches. AVPro Edge provides switch configuration guidance and pre-configured switch options, but proprietary switch hardware is not required.

What is the maximum number of encoders supported in a single system?

The MXNet EV2 platform is scalable to large enterprise deployments. The practical limit is determined by network switch capacity and bandwidth planning rather than a fixed encoder count limit.

Is this product eligible for government procurement under TAA?

Yes. This encoder is TAA compliant and manufactured in the USA, making it eligible for federal contracts subject to the Trade Agreements Act and Buy American Act requirements.

Does the encoder support audio-only zones or audio extraction?

Audio follows the video stream in the standard EV2 encoder. For dedicated audio downmixing (7.1-channel to stereo), AVPro Edge offers the AC-MXNET-1G-AVDM-EV2 encoder variant with built-in audio downmix capability.