AVPro Edge MXNet 1G Evolution II Decoder --Not Compatible with V1 Systems; TAA Compliant; Made in the USA

Product Overview

The AVPro Edge MXNet 1G Evolution II Decoder (AC-MXNET-1G-EV2-TAA) is the display-side endpoint for the MXNet Evolution II AV-over-IP platform, receiving 4K60 4:4:4 HDR video streams from MXNet EV2 Encoders over a standard 1 Gigabit Ethernet network. Each decoder connects a network drop to a display, projector, or downstream HDMI input, enabling fully scalable distributed video without dedicated matrix switch hardware. TAA compliant and manufactured in the USA, this decoder is qualified for government facility AV installations, federal AV contracts, and any procurement subject to Trade Agreements Act requirements — making it one of the few AV-over-IP decoders on the market combining domestic manufacturing with enterprise-grade performance.

Product Description

Paired with the MXNet 1G EV2 Encoder, this decoder receives compressed 4K video streams from the network and outputs them via HDMI to the connected display with near-zero latency — suitable for switching applications where frame-accurate real-time performance is required. The decoder participates in the MXNet EV2 software-defined matrix, allowing any decoder to display any encoder source on demand through the central management interface. USB, RS232, and IR pass-through on the decoder extend control signals from the display location back to the source rack, reducing the need for separate control infrastructure in multi-room installations. The unit is PoE-powered, drawing operating power from the network switch and eliminating dedicated power supplies at each display location.

Key Features

• 4K60 4:4:4 HDR Decoding — Renders full-bandwidth 4K video with HDR10 and HLG from any MXNet EV2 Encoder on the network.
• MXNet EV2 Exclusive — Compatible only with the MXNet 1G Evolution II ecosystem; not compatible with V1 encoders or controllers.
• TAA Compliant — Meets Trade Agreements Act requirements for federal and government AV procurement.
• Made in the USA — Domestically manufactured, supporting Buy American Act compliance for eligible contracts.
• Near-Zero Latency Output — Delivers real-time video at the display for live switching, command center, and broadcast monitoring applications.
• USB, RS232, IR Pass-Through — Carries control signals from the display location back to the source, eliminating redundant control wiring.
• PoE Powered — Operates from switch PoE, removing the need for a local power supply at each display endpoint.
• Software-Defined Matrix — Any decoder can be assigned to any encoder source via the MXNet management platform without rewiring.
• Scalable to Enterprise Deployments — Add decoders to expand display count without changing existing infrastructure.

Typical Applications

• Government and federal AV installations requiring TAA and Buy American Act compliant endpoints
• Corporate multi-zone video distribution with centralized source management
• University lecture halls and distributed learning spaces
• Command-and-control centers with real-time source switching at each display
• Houses of worship distributing video to lobby, overflow, and auxiliary room screens
• Hospitality venues with large-scale IPTV and signage distribution networks

Technical Specifications

Competitor Comparison

Frequently Asked Questions

Will this decoder work with my current MXNet V1 encoders?

No. The MXNet 1G Evolution II Decoder is not backward-compatible with first-generation MXNet V1 hardware. Both encoders and decoders must be EV2 units, and the system must use an EV2-compatible controller. A full system replacement is required when migrating from V1.

How many decoders can I add to one system?

The MXNet EV2 platform scales to large enterprise configurations. The practical maximum is governed by network switch port count and total bandwidth, not a fixed decoder limit imposed by the platform.

Does the decoder support video wall configurations?

Video wall functionality within the MXNet EV2 ecosystem should be confirmed with AVPro Edge for your specific configuration. Contact Creation Networks for application-specific design assistance.

Is this decoder suitable for a federal government project?

Yes. This decoder is TAA compliant and made in the USA, qualifying it for federal AV projects subject to Trade Agreements Act and Buy American Act requirements.

Does the decoder require a separate power supply?

No. The decoder is PoE-powered and draws operating power directly from the network switch, provided the switch port supplies sufficient PoE wattage.