AUDAC LINO10/B – 10 x 2" Column Speaker, 70/100V, Black

What is the AUDAC LINO10/B column speaker?

The AUDAC LINO10/B is a slim passive column speaker with ten 2" drivers and a central 1" tweeter, finished in black, for speech and background music in acoustically difficult rooms. Its narrow 15° vertical and wide 160° horizontal pattern focuses sound on the audience and away from reflective ceilings, which improves intelligibility and reduces feedback. With 40 W AES power handling, 20 Ω low-impedance input and a 70V/100V multi-tap transformer, it fits houses of worship, auditoriums, lecture rooms and presentation spaces.

How does the AUDAC LINO10/B column speaker work?

The LINO10 is a 2-way column array: ten 2" low/mid-frequency drivers are stacked in a slim aluminum enclosure with a 1" tweeter positioned at the center for high frequencies. Stacking the drivers vertically narrows vertical dispersion to 15° while keeping 160° horizontal coverage, averaged over the 1 kHz – 4 kHz range that matters most for speech. This controlled pattern sends less energy to hard ceilings and floors, so speech stays clear in reverberant halls and microphones are less prone to feedback. The speaker handles 40 W continuous (AES) and reaches 107 dB maximum SPL with 170 Hz – 15 kHz response. A multi-tap line transformer provides 40 W, 20 W and 10 W taps on 100V lines and 20 W, 10 W and 5 W on 70V, and the 20 Ω input also supports low-impedance amplifiers. Wiring lands on a 6-pin Euro terminal block. L-shaped brackets at the top and bottom hold the column 0.39" (10 mm) from the wall with a 2° vertical incline and allow horizontal rotation for aiming. At only 2.83" wide with a finely perforated aluminum grill, it blends into architectural spaces; the LINO10/W is the white finish, and the shorter LINO4 suits smaller rooms.

What are the key features of the AUDAC LINO10/B column speaker?

• 10 x 2" driver column with 1" tweeter — The 2-way array reproduces speech and background music with clear high-frequency detail.
• Controlled 15° vertical dispersion — The narrow vertical pattern reduces reflections and improves intelligibility in reverberant rooms.
• Wide 160° horizontal coverage — Broad horizontal dispersion covers seating areas evenly from a side wall.
• 70V/100V multi-tap transformer — Taps of 20 W, 10 W and 5 W at 70V (40 W, 20 W and 10 W at 100V) allow level balancing across zones.
• 20 Ω low-impedance input — The speaker can also run directly from low-impedance amplifier outputs.
• L-shaped mounting brackets — Top and bottom brackets allow tilt and rotation with a 0.39" wall distance and 2° incline.
• Slim aluminum enclosure — The 2.83" wide aluminum body with perforated grill fits discreetly in architectural interiors.
• Euro terminal block connection — A 6-pin Euro terminal block simplifies wiring and tap selection.

Where is the AUDAC LINO10/B column speaker typically used?

• House of worship
• Auditorium
• Training room
• Lecture and presentation rooms
• Corporate spaces

Technical Specifications

Frequently Asked Questions