Allied Telesis AT-FS750/28PS-10 24 X 10/100T POE+ AND 4 SFP WEBSMART SWITCH

Product Overview

The Allied Telesis AT-FS750/28PS-10 is a 24-port 10/100 PoE+ Fast Ethernet WebSmart switch with 4 dedicated SFP gigabit uplink slots, delivering Layer 2 management at the edge of small and medium-sized networks. Designed for environments with legacy 100Mbps access devices — IP cameras, VoIP phones, wireless access points, and RFID readers — this switch delivers up to 30W PoE+ per port under IEEE 802.3at. Web-based management gives IT administrators granular control without the complexity of a full CLI-managed platform.

Product Description

The Allied Telesis FS750 24-port PoE+ Fast Ethernet WebSmart switch (AT-FS750/28PS-10) is purpose-built for access-layer deployments where connected endpoints operate at 10/100Mbps — not Gigabit. This is an important distinction: if your environment runs IP surveillance cameras, analog VoIP handsets, or 802.11n access points with Fast Ethernet uplinks, the FS750/28PS-10 delivers reliable PoE+ power and switching without the cost premium of unnecessary Gigabit ports. The 4 SFP uplink slots accept 100/1000 SFP transceivers, giving you flexible gigabit uplink connectivity to aggregation or core switches. Layer 2 WebSmart management enables port-based VLANs, IEEE 802.1p QoS prioritization, IGMP snooping for multicast control, port mirroring for traffic analysis, and Spanning Tree Protocol for loop prevention. The rack-mountable chassis with an internal power supply suits wiring closets and edge distribution points. PoE+ budget is shared across all 24 ports, making workload planning essential in high-density PoE deployments. As an Allied Telesis FS750-series switch, the AT-FS750/28PS-10 is available through authorized resellers including Creation Networks.

Key Features

• 24x 10/100BASE-TX PoE+ Ports — IEEE 802.3at compliant, up to 30W per port for IP cameras, VoIP phones, and APs
• 4x SFP Gigabit Uplink Slots — Flexible fiber or copper uplinks to aggregation switches
• WebSmart (Layer 2) Management — Web-based GUI with VLAN, QoS, IGMP snooping, port mirroring, and STP
• Fast Ethernet Access Ports — Optimal for legacy 10/100Mbps endpoints; avoid over-engineering with unnecessary Gigabit ports
• Rack-Mountable Form Factor — Includes rack-mount brackets for 1U installation in standard 19-inch racks
• Internal Power Supply — Integrated PSU for simplified cabling and reliable PoE delivery
• IEEE 802.1p QoS — Traffic prioritization for latency-sensitive VoIP and video applications

Typical Applications

• SMB and retail store LAN access layers with 10/100Mbps endpoints
• IP surveillance camera deployments requiring PoE+ power
• VoIP phone systems using IEEE 802.3at PoE+
• Wireless access point distribution in 802.11n or legacy Wi-Fi environments
• Edge-of-network switching in school, hospitality, and light industrial environments

Technical Specifications

Frequently Asked Questions

Q: Is the AT-FS750/28PS-10 a Gigabit switch?

No. The 24 access ports are Fast Ethernet (10/100Mbps). The 4 SFP uplink ports support 100/1000Mbps. If your endpoints require Gigabit access ports, consider the Allied Telesis GS950 or GS920 series instead.

Q: What PoE standard does the FS750/28PS-10 support?

The switch supports IEEE 802.3af (PoE, up to 15.4W) and IEEE 802.3at (PoE+, up to 30W) per port. This covers the majority of IP cameras, VoIP phones, and 802.11n/ac access points.

Q: What is WebSmart management?

WebSmart is Allied Telesis' web-based management tier — more feature-rich than a fully unmanaged switch, but simpler than a full CLI-managed platform. It provides VLAN configuration, QoS, IGMP snooping, port mirroring, and Spanning Tree through a browser-based interface.

Q: Can I use fiber SFP modules in the uplink slots?

Yes. The 4 SFP slots accept Allied Telesis-compatible SFP transceivers for multimode or single-mode fiber uplinks, as well as copper SFP modules.

Q: Is this switch rack-mountable?

Yes. Rack-mount brackets and screws are included in the box for 1U installation in a standard 19-inch rack.