Adder VSCD18 – DisplayPort 1.4 Cable, 32.4Gbps, 2m

Product Overview

The Adder VSCD18 is a 2-meter male-to-male DisplayPort cable rated for DisplayPort v1.4 / HBR3 data rates of 32.4Gbit/s. As the vendor-specified DisplayPort 1.4 cable for KVM extenders, it is the link Adder designates for the ADDERLink INFINITY 2122 and all ADDERLink XD500 and XD600 series products. Buyers building high-bandwidth DisplayPort KVM extension runs use the VSCD18 between source computers, extender transmitters and local displays where full HBR3 throughput must be preserved.

Product Description

DisplayPort extension is only as good as the local cabling on each end of the link, and Adder publishes the VSCD18 specifically so integrators do not have to qualify third-party cables for HBR3 operation. The cable carries DisplayPort v1.4 signaling at up to 32.4Gbit/s aggregate bandwidth, the data rate required for the high-resolution video the XD600 series transports. Adder states the VSCD18 is intended for the ALIF2122 DisplayPort matrix endpoints and the complete XD500/600 extender range, making it the standard patch between a host PC and a transmitter, or between a receiver and a monitor, in those systems. The 2-meter length suits typical rack and desk geometry: long enough to reach from a rack-mounted extender to an adjacent shelf or desk-mounted source, short enough to avoid unnecessary signal margin loss at HBR3 rates. Both connectors are full-size DisplayPort male, so no adapters are needed with standard DP equipment. Specifying the vendor's own cable also simplifies support, since the entire signal path is covered by Adder-published compatibility. Find ADDERLink extenders and companion accessories in the Adder Technology collection at Creation Networks.

Key Features

• DisplayPort v1.4 / HBR3 Rated — Supports the full 32.4Gbit/s data rate so high-resolution video reaches the extender without cable-imposed limits.
• Vendor-Designated for ALIF2122 and XD500/600 — Adder specifies the VSCD18 for the ADDERLink INFINITY 2122 and all XD500/600 series products, removing cable qualification guesswork.
• Male-to-Male DisplayPort Connectors — Connects directly between standard DisplayPort sources, extenders and displays with no adapters.
• 2-Meter Working Length — Practical reach for rack-to-shelf and desk-to-extender connections while preserving signal margin at HBR3 rates.
• Single-Vendor Signal Path — Using Adder's published cable keeps the entire extension link within documented compatibility for simpler support.

Technical Specifications