Adder VSCAT7-3 – 3m CAT7 Shielded KVM Patch Cable

Product Overview

The Adder VSCAT7-3 is a 3-meter CAT7 shielded patch cable terminated RJ45 to RJ45, specified by Adder for use with the ADDERView DDX range and the ADDERLink X-DVI PRO KVM extender. Choosing the vendor-specified CAT7 KVM patch cable removes a common variable when commissioning DDX matrix links, since shielded construction protects high-rate KVM signaling from electrical noise. It is the shortest length in a family that also includes 10m, 30m, and 50m versions, making it the right pick for in-rack and same-room connections.

Product Description

KVM matrix and extender systems push far more demanding signals down twisted-pair cable than ordinary office Ethernet, and link quality depends directly on the cable in between. Adder lists the VSCAT7 family as the recommended CAT7 shielded interconnect for the ADDERView DDX matrix range and the ADDERLink X-DVI PRO extender, so specifying it removes guesswork during installation and simplifies troubleshooting later — when the cable is a known quantity, faults are easier to isolate. The 3m length suits connections between a DDX switch and transmitters or receivers in the same rack or an adjacent bay, while the shielded CAT7 construction guards against crosstalk and EMI in dense cable trays where power and signal runs share space. Both ends terminate in standard RJ45 connectors, so the cable installs exactly like a conventional patch cord with no special tooling. For longer runs in the same system, the family scales to 10m, 30m, and 50m versions using identical construction, letting integrators standardize on one cable type from rack to remote desk.

Browse the full Adder Technology collection at Creation Networks for DDX matrix hardware, extenders, and the remaining VSCAT7 lengths.

Key Features

• Vendor-specified for DDX and X-DVI PRO — Adder lists the VSCAT7 family for use with the ADDERView DDX range and ADDERLink X-DVI PRO, so link performance is predictable.
• CAT7 shielded construction — Protects high-rate KVM signaling from crosstalk and electromagnetic interference in dense cable trays.
• Standard RJ45 termination — Installs like a conventional patch cord with no adapters or special tooling.
• 3m length for in-rack links — Right-sized for switch-to-endpoint connections within a rack or adjacent bays.
• Part of a matched length family — Also available in 10m, 30m, and 50m so one cable specification covers an entire deployment.

Technical Specifications