Adder VSC45 – 6P6C to 9-Way D Serial Cable, 0.5m

Product Overview

The Adder VSC45 serial cable connects equipment fitted with a 6P6C modular socket to a standard 9-way male D-type serial port, giving integrators a factory-terminated link for Adder KVM accessory and control connections. This 0.5m Adder serial adapter cable is built on UL2464-rated 28AWG wire, making it a dependable choice when you need a short 6P6C to DB9 cable for rack-level interconnects. As a genuine Adder accessory cable, it matches the connector pinout expected by Adder equipment, avoiding the guesswork of generic RJ12-to-serial leads.

Product Description

Serial-style modular connections still play a practical role in KVM and control installations, and the VSC45 exists to make those links tidy and repeatable. The cable carries a 6P6C modular plug on one end and a 9-way male D-type connector on the other, terminated at the factory so every conductor lands where Adder equipment expects it. At 0.5m, it is sized for in-rack runs between adjacent devices, keeping cable management clean inside a 19-inch enclosure or beneath a desk. The UL2464 jacket specification identifies a multi-conductor construction commonly used for low-voltage signal wiring, while the 28AWG conductor gauge keeps the assembly light and flexible for routing through tight cable paths. Because connector pinouts vary widely between manufacturers, a vendor-supplied lead like this removes a common source of installation faults compared with field-terminated alternatives. Specify the VSC45 alongside compatible Adder hardware to keep your bill of materials consistent, and browse the full range of Adder Technology products at Creation Networks for matching switches, extenders, and accessories.

Key Features

• Factory-Terminated 6P6C to DB9 Connection — Pre-assembled connectors eliminate field-termination errors and speed up installation.
• Compact 0.5m Length — Short reach keeps in-rack serial links tidy and avoids excess cable slack.
• UL2464 28AWG Construction — Recognized low-voltage cable specification provides a consistent, documented build.
• Genuine Adder Accessory — Pinout matches Adder equipment requirements, unlike generic modular-to-serial leads.
• Lightweight and Flexible — The 28AWG gauge routes easily through dense cable management in racks and consoles.

Technical Specifications

Note: Adder does not publish a dedicated datasheet for this cable; the table below is limited to confirmed ordering facts.