Adder VSC18 – 2m Tri-Coax VGA Video Cable, DDC Compliant

Product Overview

The Adder VSC18 is a 2m tri-coax VGA video cable built for analog video connections in professional KVM switch and extender installations. Fitted with 15-pin high-density D-sub (15HDD) male-to-male connectors, this DDC compliant VGA cable carries display identification data alongside the video signal so connected monitors are correctly detected. For integrators specifying an Adder VGA cable for KVM equipment, control room consoles, or legacy display connections, the VSC18 is the manufacturer's standard tri-coax video lead.

Product Description

Analog video remains common in established control rooms, industrial systems, and legacy workstation estates, and cable quality has a direct effect on image stability at these connections. The VSC18 uses a tri-coaxial construction, meaning the red, green, and blue video signals each travel on a dedicated coaxial core. This layout helps preserve signal integrity between a computer or KVM device and the display.

DDC compliance is the practical differentiator for this lead. The Display Data Channel lines are wired through, allowing the monitor's identification data to pass between display and source — a requirement in many KVM video cable applications where the switch or extender reads display capabilities. The 2m length suits desk-to-switch and rack-to-console runs without leaving excess slack to manage. Both ends terminate in 15HDD male connectors with thumbscrews for a secure mechanical connection. The VSC18 is a sensible cable to standardize on when deploying Adder analog KVM hardware, and it pairs with the wider range of Adder Technology products at Creation Networks.

Key Features

• Tri-Coax Construction — Dedicated coaxial cores for the RGB video signals help maintain a stable analog picture between source and display.
• DDC Compliant Wiring — Display Data Channel lines are passed through so monitors are correctly identified by connected KVM equipment.
• 15HDD Male-to-Male Connectors — Standard high-density D-sub terminations connect directly to VGA ports on computers, switches, and displays.
• 2m Working Length — A practical length for desktop and rack connections that keeps cable runs tidy.
• Genuine Adder Accessory — Manufacturer-specified cable for use with Adder KVM switches and extenders.

Technical Specifications

This is an Adder accessory cable without a standalone specification sheet on the manufacturer's site; the table below is limited to confirmed product facts.