The Parts That Hold Up Installations

Display projects rarely slip because of the display. They slip because the 86-inch panel arrived and the mount on site is rated for 200 pounds, or because the signage player was value-engineered out of the quote and nobody noticed until the install crew was on a lift. Ordering the mount, the slot-in PC, the sensor, and the calibration kit on the same purchase order as the panel is the cheapest schedule insurance available on an AV project.

Creation Networks will check panel weight, VESA pattern, and expansion-bay format against your chosen displays before the order ships.

Frequently Asked Questions About Sharp Display Accessories

Q: Which Sharp wall mount do I need for an 86-inch display?
A: The WMK-7598T is the large tilt mount, rated to 350 pounds and intended for 75-inch and larger landscape or 86-inch and larger portrait installations. The WMK-3298T covers smaller panels.

Q: What is the difference between an SDM module and an OPS module?
A: They are different slot-in compute standards with different connectors and bay sizes. Current MultiSync displays use SDM; AQUOS BOARD interactive panels use OPS. They are not interchangeable.

Q: What does the MPi4E media player do?
A: It is a Raspberry Pi Compute Module 4 signage player that installs inside the display's expansion bay and runs CMS content, giving an older display a modern player without an external box.

Q: Do I need the KT-LFD-CC2 calibration kit for a video wall?
A: For a multi-panel wall it is strongly recommended. Panels drift apart in color and brightness over time, and periodic calibration is what keeps the array looking like a single image rather than a grid of slightly different screens.

Q: Can I add Wi-Fi to a Sharp display?
A: Yes. The SI07B slot-in Wi-Fi 6 module covers the PN-ME series. Wired Ethernet is still preferred for firmware updates and large content files.

Not sure which accessory fits your panel? Contact our AV team, or browse the full Sharp collection.