RGB Spectrum 520 9512 – Replacement Power Cord for MediaWall and Linx

Product Overview

The RGB Spectrum 520 9512 is the replacement power cord for MW 4500/4200, SV 5000, OmniWall 16/32, Linx 1600/1700/1800 and Linx 3200S/3300S/3400 chassis. It is the AC mains lead between the rack PDU and the chassis inlet, and it is a service part that gets ordered when a cord is damaged, lost during a rack move, or needed in a different plug standard after equipment relocation. One ordering requirement matters here: the vendor price list states that the country of use must be specified, because the plug end differs by region. Confirm that detail before the order goes in.

Product Description

Power cords are the parts most likely to be missing when a chassis is re-racked. They get pulled out with the wrong bundle, left behind in a decommissioned rack, or damaged where a cable tie has bitten into the jacket. A processor with no cord is as far out of service as one with a failed supply, and the fix is inexpensive if the cord is on site and slow if it is not.

The vendor lists this cord across a wide set of platforms — MW 4500 and MW 4200 video wall processors, the SV 5000 multiviewer, OmniWall 16 and 32, and the Linx 1600/1700/1800 and Linx 3200S/3300S/3400 matrix systems. For a facility running several of these, that means one part number covers most of the head-end, which makes holding a couple of spares straightforward to justify.

Specify the country of use when ordering. The price list calls this out explicitly, and it is the single most common cause of a returned cord: the chassis inlet is consistent but the wall or PDU plug is not, and a cord built for one region will not land in another. If the equipment has been relocated between regions, the cord is one of the items that needs re-specifying rather than reusing.

Sites maintaining these chassis normally hold the cord with the 860 9522 replacement power supply for the 7U chassis, which the vendor lists for an overlapping set of platforms, the 920 10096 replacement air filter for Linx 1600/1700/1800 and the 625 0550-05 spare CPU processor card. RGB Spectrum publishes no datasheet for the 520 9512, so confirm the cord length, current rating and connector type with Creation Networks along with the country requirement.

Key Features

• Country of use must be specified — The vendor requires the region at order, because the plug end differs by country and a cord built for one market will not fit another.
• Covers a wide range of chassis — The part is listed for MW 4500/4200, SV 5000, OmniWall 16/32 and the Linx 1600/1700/1800 and 3200S/3300S/3400 systems, so one part number serves most of the head-end.
• High-turnover service item — Cords are the parts most often lost or damaged during a rack move, which makes a spare or two an easy holding to justify.
• Immediate restoration of service — A missing cord takes a processor out of service just as completely as a failed supply, and a spare on site resolves it in minutes.
• Correct rating for the chassis — Ordering the vendor part avoids fitting an undersized commercial cord to a fully loaded processor chassis.

Technical Specifications

• Part number — 520 9512
• Part type — Replacement power cord
• Fits — MW 4500/4200, SV 5000, OmniWall 16/32, Linx 1600/1700/1800, Linx 3200S/3300S/3400
• Ordering requirement — Country of use must be specified
• Vendor source — RGB Spectrum Gold Integrator price list description

RGB Spectrum does not publish a datasheet for this part number. Contact Creation Networks for confirmed specifications before ordering.