Peerless-AV RF8X4 – Flat Wall Mount for 43-100" Displays

What is the Peerless-AV RF8X4 flat wall mount?

The Peerless-AV RF8X4 is a fixed, low-profile flat wall mount sized for large-format 43" to 100" commercial displays. As a flat wall mount for large-format displays, it holds the screen tight to the wall with no tilt or articulation, making it a good fit for digital signage, video wall edge units, and boardroom or auditorium installations where the display needs to sit flush and level at a fixed viewing angle. The fixed design keeps installation simple and the mounting hardware footprint minimal, which matters on large-format jobs where multiple displays are going up on the same wall. Integrators specifying a commercial-grade flat mount for a 43" to 100" display will find the RF8X4 sized to match that panel range.

What does the Peerless-AV RF8X4 do?

The RF8X4 secures a large-format display in a fixed, flush position against the wall, which is the preferred configuration for digital signage, lobby displays, and fixed-angle boardroom screens where movement after installation isn't needed. Because the mount has no moving parts, it presents a lower profile than a tilt or articulating mount of comparable size, which matters in applications like video walls or signage runs where a slim, consistent gap between the display and the wall is part of the finished look. The fixed-mount design also simplifies alignment across multiple displays hung side by side, since there is no tilt mechanism to compensate for between units. Large-format flat mounts like the RF8X4 are commonly specified for auditoriums, training rooms, and multi-purpose rooms where a display is set once at the correct height and angle during commissioning and doesn't need field adjustment afterward. Integrators should verify the specific VESA pattern and load rating on the display being installed against the mount's published capacity before finalizing a bill of materials, particularly on large interactive or touch-enabled panels that can weigh more than standard commercial displays in the same size class.

Key Features

• Fixed, flush-mount design — Holds large-format displays tight to the wall for a clean digital signage or boardroom finish.
• Sized for 43" to 100" displays — Covers the panel range typical of large commercial and signage-class screens.
• Low-profile hardware — Minimizes the gap between display and wall for a finished, professional appearance.
• Simplified multi-display alignment — No tilt mechanism to compensate for when installing displays side by side.
• Commercial-grade construction — Built for fixed-position deployment in boardrooms, auditoriums, and signage installations.

Technical Specifications

Weight capacity and full VESA pattern data for the RF8X4 were not published on Peerless-AV's current spec pages at the time of writing; contact Creation Networks for the current spec sheet to confirm compatibility with a specific display before ordering.