Eaton SM1000RM1UTAA – TAA 1U Rackmount UPS 1000VA

Product Overview

The Eaton SM1000RM1UTAA is a TAA-compliant 1U rackmount UPS built for government facilities and commercial AV racks where rack space is limited but reliable backup power is still required. Rated at 1000VA/800W, this 1U rack UPS for AV rack installations protects servers, network storage, and control equipment from blackouts, brownouts, and line noise while consuming only a single rack unit of space. Its GSA-compliant UPS for government facilities status makes it a practical choice for federal and municipal AV racks that must meet TAA sourcing requirements without sacrificing rack density.

Product Description

The SM1000RM1UTAA mounts in a single rack unit of standard 19-inch, 2- or 4-post rack, making it well suited for AV racks where every inch of vertical space is already allocated to switches, amplifiers, and control processors. It provides six NEMA 5-15R outlets, two of which can be switched off remotely to reboot equipment or shed nonessential loads and extend battery runtime for mission-critical devices. The internal battery is rated for 14 minutes of support at half load (400W) and 4 minutes at full load (800W), enough time in most facilities to complete an orderly shutdown or bridge to backup generator power. Automatic voltage regulation maintains 120V nominal output across an input range of 83V to 147V without switching to battery, which reduces battery cycling in buildings with less stable utility power. Operating at 99 percent line-mode efficiency, the unit meets strict EPA efficiency guidelines while keeping operating costs low. A 450-joule AC surge suppression rating combined with EMI/RFI noise filtering protects connected AV and network equipment from both surges and electrical noise that can otherwise degrade signal quality or damage sensitive components. USB and DB9 ports with PowerAlert software support remote configuration, and an EPO port allows integration with building-wide emergency power-off systems, a requirement in many government and institutional facilities.

Key Features

• 1U Rack Form Factor — Fits a single rack unit in standard 19-inch 2- or 4-post racks, preserving space for other AV and network equipment.
• TAA Compliance for GSA Schedule Purchases — Meets Federal Trade Agreements Act sourcing requirements for government procurement.
• Two Remotely Switchable Outlets — Enables remote equipment reboot or load shedding to extend runtime for critical devices.
• Automatic Voltage Regulation (83V-147V) — Maintains stable 120V output without depleting the battery during minor sags or surges.
• 99% Line-Mode Efficiency — Meets strict EPA guidelines while minimizing operating costs.
• 450-Joule Surge Suppression with EMI/RFI Filtering — Protects connected equipment from surges and electrical noise.
• EPO Port for Building Integration — Supports emergency power-off requirements common in institutional and government facilities.

Typical Applications

• Government space AV and network racks requiring TAA-compliant equipment
• Boardroom equipment racks with limited available rack space
• Conference room AV closets needing compact backup power
• Huddle room equipment racks in federal or municipal buildings
• Training room AV racks in public sector facilities

Technical Specifications

Frequently Asked Questions

Will the SM1000RM1UTAA fit alongside other AV equipment in a single rack?

Yes, it occupies only 1U of rack space in a standard 19-inch, 2- or 4-post rack, leaving room for switches, amplifiers, and control processors.

Is this unit eligible for government and GSA Schedule purchases?

Yes, it is TAA compliant under the Federal Trade Agreements Act, making it eligible for GSA Schedule and other federal procurement channels.

Can I remotely reboot connected equipment during an outage?

Yes, two of the six outlets can be switched off and back on remotely, which is useful for rebooting unresponsive network equipment or shedding nonessential loads.

Does this UPS support building-wide emergency power-off systems?

Yes, it includes an EPO port that can integrate with facility-wide emergency power-off systems, which is often a requirement in institutional and government buildings.

How is the unit managed and monitored?

It includes USB and DB9 ports with PowerAlert software for local configuration, and supports an optional SNMPWEBCARD for network-based remote monitoring.

What runtime should I expect during a typical outage?

Runtime is rated at 14 minutes at half load (400W) and 4 minutes at full load (800W), sufficient for most orderly shutdown or generator-transfer scenarios.

Can Creation Networks confirm TAA documentation for a federal purchase order?

Yes, our team can provide TAA compliance documentation to support government and federally funded procurement requirements.