Eaton OMNIVS1000 – 1000VA Line-Interactive Tower UPS

Product Overview

The Eaton OMNIVS1000 is a 1000VA/500W line-interactive UPS built for protecting network switches, AV control processors, and point-of-sale equipment in commercial installations. It is a common choice for network closet and small server room deployments where integrators need reliable battery backup with automatic voltage regulation (AVR) in a compact tower form factor. With eight outlets split between battery-backed and surge-only banks, it supports mixed loads typical of a rack-mount network cabinet or AV equipment rack. The unit ships with a USB port for real-time monitoring, making it well suited for remote-managed commercial and IT deployments.

Product Description

The OMNIVS1000 is a 120V line-interactive UPS designed to keep sensitive electronics running through brownouts, surges, and short power interruptions. Line-interactive topology means the unit corrects brownouts as low as 89V using automatic voltage regulation instead of switching to battery, which extends battery life and reduces the frequency of full discharge cycles in facilities with unstable utility power. This makes it a practical fit for commercial AV installations, network closets, and IT equipment racks where clean, continuous power is required for switches, routers, DVRs, and control systems.

The tower chassis houses six battery-backed outlets and two surge-only outlets, all using standard 5-15R receptacles, giving integrators flexibility when wiring a mixed rack of AV and networking gear. The hot-swappable VRLA battery (Eaton RBC51 replacement) can be serviced without powering down connected equipment, an important consideration for facilities and IT managers who need to maintain uptime during routine maintenance. A rear USB (HID-enabled) port with included cable allows the UPS to communicate with a connected computer or network device for automated shutdown and status monitoring, a feature commercial deployments rely on for unattended equipment closets.

Built-in TEL/DSL/Ethernet surge protection adds a layer of defense for data lines running into the same rack, which is a common requirement in commercial network closet installations where both power and data cabling terminate at the same equipment. At greater than 95% efficiency, the OMNIVS1000 also qualifies as a GREEN UPS, reducing standby power draw for facilities tracking energy use across IT and AV infrastructure. For integrators and procurement teams standardizing on Eaton/Tripp Lite power protection across multiple sites, this model provides a dependable, low-maintenance option for smaller-load commercial deployments.

Key Features

• Line-Interactive AVR — Corrects brownouts as low as 89V without switching to battery, extending battery service life in unstable power environments.
• 1000VA / 500W Capacity — Sized for network switches, AV control processors, and other moderate-load commercial equipment.
• 8 Total Outlets (6 Battery-Backed + 2 Surge-Only) — Supports mixed racks with both critical and non-critical loads on 5-15R receptacles.
• Hot-Swappable Battery — User-replaceable VRLA battery (RBC51) allows service without shutting down connected equipment.
• USB Monitoring Port — HID-enabled USB connection with included cable for automated shutdown and status reporting.
• TEL/DSL/Ethernet Surge Protection — Protects data lines running alongside power in the same rack or equipment closet.
• Compact Tower Design — Space-efficient footprint suited for network closets, AV racks, and under-desk or shelf mounting.
• Greater Than 95% Efficiency — GREEN UPS rating reduces standby power draw for energy-conscious facilities.
• 3-Year Limited Warranty with $200,000 Ultimate Lifetime Insurance — Backed by Eaton's connected equipment protection policy.

Typical Applications

• Network closet
• Server room
• Data center
• Conference room
• Huddle room
• Commercial meeting space
• Multi-purpose room

Technical Specifications

Frequently Asked Questions

What equipment can I run on the OMNIVS1000?
The 500W/1000VA capacity is intended for moderate loads such as network switches, routers, AV control processors, DVRs, and similar rack-mount devices. Add up the total wattage of connected equipment and keep it under 500W for reliable runtime.

How long will connected equipment stay powered during an outage?
At full 500W load, expect approximately 3.5 minutes of runtime; at half load, runtime extends to approximately 14 minutes. This is designed to bridge short outages and allow for graceful shutdown, not extended operation.

Can this UPS be rack-mounted?
The OMNIVS1000 ships in a tower configuration and also supports a wall-mount configuration. It is not a rack-mount (RM) chassis; for 1U/2U rack-mount installations, a different Eaton/Tripp Lite series would be required.

Does it integrate with network monitoring or automated shutdown software?
Yes. The included USB (HID-enabled) port and cable allow the UPS to communicate with a connected PC or server for real-time status monitoring and automated graceful shutdown.

Can the battery be replaced without powering down connected equipment?
Yes. The VRLA battery is hot-swappable and user-replaceable using the RBC51 replacement battery, allowing maintenance without an equipment outage.

What is covered under warranty?
The OMNIVS1000 includes a 3-year limited warranty for the U.S., Canada, and Mexico, backed by Eaton's $200,000 Ultimate Lifetime Insurance covering connected equipment.

Does it protect networking and data lines in addition to power?
Yes. Built-in TEL/DSL/Ethernet surge protection is included for data lines that share the same rack or equipment closet as the protected power circuit.

Is this suitable for a data center or server room deployment?
It is best suited for smaller-load network closets and equipment racks rather than primary data center power protection. For higher-capacity data center or server room loads, a larger-capacity Eaton UPS would be more appropriate.