Eaton EMAGMFA5A5A5A5L – 29kW HDX Rack PDU G4, 48 Outlets

Product Overview

The Eaton EMAGMFA5A5A5A5L is a high-density 3-phase managed rack PDU from Eaton's HDX Rack PDU G4 platform, built for data center racks packing large numbers of servers and network devices onto a single 208V 3-phase circuit. Rated at 29kW with 48 outlets, this managed PDU targets colocation facilities and enterprise data centers that need both heavy power capacity and outlet-level remote control. Buyers researching a 48-outlet 3-phase PDU or a Gigabit Network Module-equipped PDU for dense server racks will find this model sized for that requirement.

Product Description

The EMAGMFA5A5A5A5L accepts a 200-240V 3-phase Delta input (208V nominal) rated at 80A through a 4100P9W plug on a 6-foot cord, and distributes power across 48 combo outlets, 24 C13 and 24 C39 receptacles, with the C39 outlets accepting both C14 and C20 connector types for flexible equipment compatibility. Use the product photo to confirm the vertical outlet-bank arrangement and combo-outlet spacing before planning power cord routing in the rack.

Twelve 2-pole 20A circuit breakers protect the load banks, and the PDU is managed through Eaton's Gigabit Network Module supporting SNMP and MQTT connectivity into Eaton's Brightlayer data center software, alongside an onboard LCD pixel display showing outlet-level current, voltage, and power readings accurate to plus or minus 1 percent. The lightweight aluminum 0U vertical chassis runs nearly 76 inches tall while weighing just over 31 lb, keeping installation manageable despite the PDU's high outlet count.

This model suits data centers consolidating a large number of circuits onto fewer, higher-capacity PDUs, and integrators standardizing on Eaton's current-generation G4 managed platform for new high-density builds.

Key Features

• 29kW 3-Phase Capacity — Delivers substantial power for high-density server and network racks.
• 48 Combo Outlets — 24 C13 and 24 C39 receptacles, with C39 outlets accepting both C14 and C20 connectors.
• Gigabit Network Module — Enables SNMP/MQTT remote monitoring through Eaton Brightlayer software.
• ±1% Metering Accuracy — Outlet-level current, voltage, and power readings for precise load management.
• 12 Circuit Breakers — 2-pole 20A breakers protect individual load banks.
• Aluminum 0U Construction — Lightweight vertical chassis for easier handling during installation.
• High Outlet Density — Consolidates power distribution for large racks onto a single PDU.

Typical Applications

• Data center
• Colocation facility
• Server room

Technical Specifications

Frequently Asked Questions

What input circuit does the EMAGMFA5A5A5A5L require?

It requires a 200-240V 3-phase Delta circuit (208V nominal) rated at 80A, terminated in a 4100P9W connector.

Can this PDU power both C14 and C20-corded equipment?

Yes. The 24 C39 outlets accept both C14 and C20 connectors, alongside 24 dedicated C13 outlets, covering a wide mix of server and network equipment.

Does this PDU support remote monitoring for a data center management system?

Yes, the built-in Gigabit Network Module supports SNMP and MQTT connectivity for integration with Eaton's Brightlayer software and most standard DCIM platforms.

How is the PDU protected against circuit overload?

Twelve 2-pole 20A circuit breakers isolate load banks, so a fault on one bank does not take down the entire PDU.

Is this PDU suitable for high-density GPU or compute racks?

Yes. At 29kW across 48 outlets, it is designed for colocation and enterprise data center racks running dense server and network loads on a single 3-phase circuit.

What warranty does Eaton provide on this rack PDU?

Eaton backs this unit with its standard manufacturer warranty; contact Creation Networks for the current term and any extended coverage options.