Cisco Room Kit EQX CS-KIT-EQX-FSK-C= – Floor Stand Spare, Carbon Black

Product Overview

The trailing = on this part number is what separates it from the standard floor stand option: CS-KIT-EQX-FSK-C= is supplied as a spare service unit rather than as part of a new system order. It is bought when an installed Room Kit EQX has to be re-mounted after a refit, when a stand is damaged in transit or handling, or when an estate keeps mounting hardware in service stock because a stand cannot be improvised on site. The published configuration is the same Carbon Black floor stand: 1910 mm high, 2800 mm long and 924 mm wide without screens, weighing 172 kg, and rated for screens up to 42 kg each.

Product Description

Mounting hardware is often the part of a flagship room that fails a schedule. A stand damaged during a building move cannot be substituted with a generic display stand, because the assembly carries a 2800 mm long integrated module containing the codec, camera, amplifier, six loudspeakers and a bass unit, not a pair of screens on a pole. Ordering the matching service part is the only route back to the published configuration.

The same constraints apply as on a new installation. Screens are 65 in. to 75 in. on the main module with support for a third extra screen, mounted on 2 x VESA with 400 vertical and 400-600 horizontal adjustment, at a maximum of 42 kg per screen in the floor stand configuration and a maximum thickness of 75 mm. Each screen needs its own power outlet, and Cisco recommends a minimum screen resolution of 3840 x 2160 at 60 fps.

A refit is also the moment to check whether the mounting version should change. Cisco publishes three: wall mount at 1230 x 2800 x 138 mm and 120 kg, wall stand at 1890 x 2800 x 152 mm and 135 kg, and this floor stand at 1910 x 2800 x 924 mm and 172 kg. The wall-mount and wall-stand versions allow 50 kg per screen, so a heavier commercial display may point to a different stand rather than this one.

Delivery is in two packages: the floor stand kit at 1652 x 971 x 226 mm and 45 kg, and the rear panels at 1446 x 1089 x 320 mm and 20 kg. Cisco publishes no installer count or lift requirement for the assembly, so plan handling from those weights. The compliance model number TTC60-34 applies to all Room Kit EQX part numbers. For the wider system, see large room solutions and video conference systems.

Key Features

• Spare service unit — The = suffix marks this as a service replacement for an existing Room Kit EQX installation rather than part of a new system order.
• Matching published configuration — The stand is the same Carbon Black floor stand Cisco publishes at 1910 x 2800 x 924 mm and 172 kg, so a repaired room returns to the documented configuration.
• 42 kg per screen limit — The floor stand carries up to 42 kg per screen; the wall-mount and wall-stand versions allow up to 50 kg, which is worth re-checking at a refit.
• VESA 400 mounting with lateral adjustment — Two VESA mounts with 400 vertical and 400-600 horizontal adjustment accept the 65 in. to 75 in. panels the main module supports.
• Two-package delivery with published weights — The floor stand kit is 45 kg and the rear panels 20 kg, with published carton sizes for planning access and lifting.
• Carbon Black finish — Cisco lists Carbon Black as the finish for the floor stand version, matching an existing Carbon Black installation.

Typical Applications

• Boardroom — restores a damaged or relocated executive room installation to the published mounting configuration.
• Conference room — supports a refit where an existing system moves to a space without a suitable structural wall.
• Multi-purpose room — allows an installed system to be re-mounted when a room layout changes.
• Commercial meeting space — held as service stock so a damaged stand does not take a flagship room out of service.

Technical Specifications

Frequently Asked Questions

What does the = suffix mean on this part number?

It marks a spare, service-unit-only order. The hardware is the Cisco Room Kit EQX Floor Stand in Carbon Black, supplied as a replacement for an existing installation rather than as part of a new system.

Can this stand replace a wall-mounted EQX installation?

Cisco publishes wall mount, wall stand and floor stand as three available versions of Room Kit EQX with different dimensions and screen weight limits. The floor stand is 1910 x 2800 x 924 mm at 172 kg and carries up to 42 kg per screen, against 50 kg on the wall-mount and wall-stand versions, so confirm the display weight before changing version.

What screens does it support?

Screens from 65 in. to 75 in. on the main module with support for a third extra screen, on 2 x VESA mounts with 400 vertical and 400-600 horizontal adjustment, at a maximum thickness of 75 mm. Certain 75 in. to 85 in. models are compatible when meeting the requirements in the Room Kit EQX Room Preparation Guide.

How is it packaged?

Cisco publishes two packages: the floor stand kit at 1652 x 971 x 226 mm and 45 kg, and the rear panels at 1446 x 1089 x 320 mm and 20 kg.

Are displays or a codec included?

No. Cisco states displays are not included in the Room Kit EQX bundle, and this part number covers the floor stand mounting version only.

What warranty applies?

Cisco publishes a 1-year limited liability warranty for Cisco Room Kit EQX. Warranty is handled per Cisco's standard terms for this product class, so contact Creation Networks to confirm coverage for your order.