Christie 140-154101-01 – QwikRig Rigging Frame V2 for 1DLP Projectors

What is the Christie 140-154101-01 QwikRig Rigging Frame V2?

The Christie 140-154101-01 QwikRig Rigging Frame V2 is a single-assembly rigging frame for Christie GS Series, Inspire Series and Korus Series 1DLP laser projectors. It fastens to the bottom of the projector so it can be secured to truss, stacked up to three high and aligned with independent pitch, yaw and roll controls. This version was redesigned to support L-shaped ultra short throw lenses, including the GS 0.37-0.4:1 UST lens.

What does the Christie 140-154101-01 do?

The QwikRig V2 frame lets one person install and adjust a compact laser projector on truss or a purpose-built structure. Up to three framed projectors can be stacked in landscape orientation and rigged upright or inverted, which is useful for brightness stacking in event staging or for compact blended arrays. A single projector can also be hung in portrait orientation, though stacking is not permitted in portrait.

Every projector in a stack has its own pitch, yaw and roll adjustment with lock-downs, so you can trim one image without moving the others. The frame uses standard 50 mm OD tubing that accepts common burger and industry clamps, and its open design keeps the projector accessible for installation, filter changes and maintenance.

Christie lists the frame for GS Series models such as the Christie DWU880A-GS, Inspire Series models such as the DWU760-iS, and Korus Series models such as the 4K1400-KS. Model-specific screws and spacers are called out in Christie's assembly instructions.

What are the key features of the Christie 140-154101-01?

• Independent pitch, yaw and roll — each adjustment has its own lock-down for faster, more accurate setup.
• Stack up to three projectors — adjust any projector in the stack without affecting the others.
• UST lens support — required for use of L-shaped UST lenses on supported models.
• Standard 50 mm tubing — accepts common burger and industry truss clamps.
• Portrait capable — a single projector can be mounted to truss in portrait orientation.
• One-person setup — installation and adjustment can be done by one person, with open access for filters and maintenance.

Where is the Christie 140-154101-01 typically used?

• Auditorium
• House of worship
• Multi-purpose room
• All-hands room
• Training room
• Broadcast studio

Technical Specifications

Frequently Asked Questions

Which Christie projectors work with QwikRig V2?

Christie lists GS Series (including DWU880-GS, DWU1100-GS and DWU1400-GS), Inspire Series (DWU760-iS, DWU860-iS, DWU960-iS, DWU960ST-iS, 4K860-iS) and Korus Series (4K1000-KS, 4K1400-KS). See more in our Christie Digital collection.

Do I need this frame for a UST lens?

Yes. Christie states the V2 frame is required for L-shaped UST lenses such as the GS 0.37-0.4:1 UST lens.

How many projectors can be stacked?

Up to three in landscape orientation. Christie requires safety straps between stacked frames and does not permit stacking in portrait.

Are mounting screws included?

Christie's instructions specify model-specific screws and spacers for GS, Inspire and Korus projectors. Contact us and we will confirm the hardware for your model.

Does a filter frame interfere with yaw adjustment?

On Korus projectors, Christie notes that yaw range is almost zero in one direction when the Korus filter frame or filters sit next to the adjacent vertical pole.

Can Creation Networks install the rig?

Yes. We design, rig and commission projection systems nationwide and support them after install.

What warranty applies?

Christie's standard limited warranty lists projector accessories sold separately from a projector at 1 year.