AVPro Edge 12 port network switch built as a part of the MXNET Ecosystem.

Product Overview

The AVPro Edge AC-MXNET-SW12 is a 12-port managed network switch factory pre-configured for deployment within the AVPro Edge MXnet AV-over-IP ecosystem. Unlike general-purpose IT switches that require manual IGMP snooping, multicast configuration, and QoS tuning before they can carry AV-over-IP traffic reliably, the AC-MXNET-SW12 ships ready for MXnet installations — reducing commissioning time and eliminating a common source of AV-over-IP integration errors. It is the appropriate switch for smaller MXnet deployments where a 12-port footprint covers the required endpoint count, such as single-room video walls, small conference centers, and distributed display systems with up to 12 connected devices. The switch is part of a family that also includes 24-port and 48-port models for larger installations.

Product Description

AV-over-IP systems fail most often at the network layer — misconfigured multicast settings, incorrect IGMP snooping behavior, and inadequate QoS policies are the primary causes of dropped frames, latency spikes, and source-switching failures in SDVoE and similar AV-over-IP systems. The AC-MXNET-SW12 addresses this by arriving pre-configured with the exact network settings AVPro Edge's MXnet system requires, tested at the factory before shipment.

The switch provides 12 Gigabit Ethernet ports for connecting MXnet encoders, decoders, control boxes, and other endpoints. For smaller systems where all endpoints fit within 12 ports — including the ports consumed by uplinks to the rest of the network or to control devices — this is a complete network layer solution. Web GUI, SNMP, and API management interfaces allow IT administrators to monitor the switch alongside other network infrastructure.

Key Features

• Factory Pre-Configured for MXnet AV-over-IP — ships with IGMP snooping, multicast routing, and QoS settings tuned for the MXnet SDVoE ecosystem — no network configuration required before deployment.
• 12 Gigabit Ethernet Ports (RJ45) — connects up to 12 MXnet endpoints including encoders, decoders, control boxes, and management devices.
• PoE/PoE+ Support — powers compatible MXnet endpoints directly from the switch, eliminating separate power adapters at each device location.
• Web GUI, SNMP, and API Management — provides IT-standard management interfaces for monitoring, diagnostics, and integration with network management systems.
• Optimized Multicast Handling — pre-configured multicast group management ensures video streams reach intended endpoints without flooding the network.
• Rackmount or Desktop Deployment — fits standard equipment racks and can also be deployed on a desktop or shelf for smaller installations.
• MXnet Ecosystem Validated — tested and validated by AVPro Edge for use with MXnet encoders, decoders, and the MXnet control box.
• Scales Within the MXnet Switch Family — paired with 24-port and 48-port MXnet switches for larger deployments using the same pre-configured approach.

Typical Applications

• Small conference centers with up to 12 MXnet AV-over-IP endpoints
• Single-room or single-zone video wall installations using MXnet encoders and decoders
• Distributed display systems in smaller retail stores, lobbies, and waiting rooms
• University classrooms or small campus AV-over-IP zones that need a dedicated, pre-configured AV switch
• Meeting room AV systems where IT staff prefer a managed switch validated for the AV platform in use

Technical Specifications

Competitor Comparison

The table below compares the AVPro Edge AC-MXNET-SW12 against the Cisco SG350-10 and Netgear GS728TP — two IT managed switches commonly considered as lower-cost alternatives for AV-over-IP deployments.

Frequently Asked Questions

Why buy an AVPro Edge switch instead of a Cisco or similar managed switch at a lower price?

General-purpose IT switches require manual configuration of IGMP snooping, multicast group management, and QoS policies to reliably carry AV-over-IP traffic. Errors in this configuration are the leading cause of AV-over-IP failures in the field. The AC-MXNET-SW12 ships pre-configured for the MXnet system, removing that risk and reducing commissioning time. For integrators billing by the hour, the reduced setup time often offsets the price difference.

Can this switch be used in a mixed MXnet and general IT network environment?

The switch is pre-configured for MXnet AV-over-IP traffic. If you need to carry both AV-over-IP multicast traffic and standard IT traffic on the same switch, consult AVPro Edge to confirm the configuration supports that topology without conflict.

What happens if I need more than 12 ports?

AVPro Edge offers 24-port (AC-MXNET-SW24) and 48-port (AC-MXNET-SW48) versions of the MXnet switch with the same pre-configuration. For larger deployments, the 24 or 48-port model — or multiple switches — should be specified.

Does this switch provide PoE power to MXnet encoders and decoders?

Yes. The AC-MXNET-SW12 includes PoE/PoE+ on its ports, which can power compatible MXnet endpoints directly from the switch, eliminating separate power injectors or power adapters at each device location.

Is this switch compatible with MXnet 10G SDVoE systems or only standard MXnet?

Verify compatibility with AVPro Edge before specifying. The MXnet ecosystem includes both standard (1G) and 10G SDVoE variants. The correct switch model depends on which MXnet generation you are deploying.