Adder RC4-8P8C – 4-Channel Remote Control for AdderView PRO4

Product Overview

The Adder RC4-8P8C is a 4-channel remote control for the ADDERView PRO4 range, providing direct push-button access to any channel from your desktop. It connects to the OPTIONS port on the rear panel of the switch using the supplied 10-foot cable with an 8P8C connection, and the same OPTIONS-port remote control approach is documented by Adder for the CCS-PRO4 and CCS4-USB switches. For desks where the KVM switch sits in a rack or under the work surface, this KVM remote control switch keeps channel selection within arm's reach.

Product Description

Front-panel buttons are only useful when the switch is on the desk. In practice, AdderView PRO4 units are often racked with the computers they serve, leaving operators to rely on hotkeys alone. The optional RC4-8P8C remote control unit restores instant, tactile switching: one button per channel, pressed from the desktop.

The supplied 10-foot (3m) cable links the remote to the OPTIONS port on the rear of the switch, giving enough reach for under-desk or adjacent-rack mounting while the button pad stays beside the keyboard. Because Adder documents OPTIONS-port remote control across the AdderView PRO and CCS-PRO/CCS4-USB user guides, the RC4-8P8C serves as a consistent desktop selector across mixed four-port deployments — useful for editing suites, test benches, and operator desks that pair one console with four computers. There is nothing to configure and no software involved: connect the cable to the remote and to the switch's OPTIONS port, and each button press selects the corresponding channel. Pair it with four-port Adder switches from the Adder Technology collection at Creation Networks.

Key Features

• Direct Push-Button Channel Access — Selects any of four channels instantly from the desktop without hotkey sequences.
• Built for the ADDERView PRO4 Range — Vendor-designated 4-channel remote control for AdderView PRO4 switches.
• Documented CCS-PRO4 / CCS4-USB Support — Adder user guides describe connecting the RC4 remote to the OPTIONS port on these switches as well.
• 10-Foot Cable Included — Supplied cable links the remote to the switch's rear-panel OPTIONS port, supporting under-desk and rack placements.
• 8P8C Connection — Uses the 8P8C connector format accepted by the switch OPTIONS port.
• No Software Required — Plug-in operation with nothing to install on connected computers.

Technical Specifications