Crestron HD-TXC-101-C-E DM Lite® Transmitter for HDMI®, IR, and RS-232 Signal Extension over CATx Cable (Discontinued, Limited Quantity)

Spec Sheet

Discontinued, Limited Quantity available! please see replacement HD-TXC-101

The HD-TXC-101-C-E is a DM Lite® surface-mountable transmitter designed to pair with a DM Lite or DMPS Lite™ receiver to form a signal extender for HDMI®, RS-232, and IR signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K. In addition to video and audio, the HD-TXC-101-C-E supports the extension of RS-232 and IR control signals in either direction.1

For applications requiring a wall plate version, refer to the HD-TXC-101-C-1G-E-B-T or HD-TXC-101-C-1G-E-W-T product page.

For applications that do not require IR or RS-232 signal extension, refer to the HD-TX-101-C-E product page.

The USB power port supplies power only (500 mA maximum) and is suitable for general use to power USB powered devices. No USB data is passed through this connection. It cannot be used to extend USB data, video, or audio signals.

The HD-TXC-101-C-E is designed to mount on a flat surface beneath a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. When powered using the provided wall mount power pack, the HD-TXC-101-C-E also supplies power to the connected receiver over the link cable. Alternately, a power pack may be connected to the receiver, which in turn supplies power to the HD-TXC-101-C-E over the link cable.2

NOTE: This product is not addressable from a control system and offers no programmable functionality. AV, CEC, IR, and RS-232 signals are simply passed through between a single transmitter and receiver pair. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite or DMPS Lite receiver. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology.

• Pairs with a DM Lite® or DMPS Lite™ receiver
• Enables extension of HDMI®, RS-232, and IR signals
• Links to the receiver via a single CAT5e (or higher) twisted pair cable
• Supports 4K and UHD at up to 130 ft (40 m)
• Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
• Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
• Handles 3D video and Deep Color
• Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
• Compatible with HDMI, DVI, and Dual-Mode DisplayPort™ sources
• USB power port supplies power to USB powered devices
• HDCP 2.2 compliant
• Passes CEC and EDID signals
• Extends bidirectional RS-232 and IR control signals
• Low-profile surface mount design
• Universal 100-240V power pack included