Crestron HD-RX-4K-410-C-E-SW4 MPS Lite™ 4K Multiformat 4x1 AV Switch and Receiver with 4-Port Ethernet Switch - Creation Networks
Crestron HD-RX-4K-410-C-E-SW4 MPS Lite™ 4K Multiformat 4x1 AV Switch and Receiver with 4-Port Ethernet Switch - Creation Networks
Roll over image to zoom in Click on image to zoom
Crestron HD-RX-4K-410-C-E-SW4 MPS Lite™ 4K Multiformat 4x1 AV Switch and Receiver with 4-Port Ethernet Switch - Creation Networks
Crestron HD-RX-4K-410-C-E-SW4 MPS Lite™ 4K Multiformat 4x1 AV Switch and Receiver with 4-Port Ethernet Switch - Creation Networks
Product Questions? Ask Our Experts!
Tel: 888.230.3661 sales@creationnetworks.net

Crestron HD-RX-4K-410-C-E-SW4 MPS Lite™ 4K Multiformat 4x1 AV Switch and Receiver with 4-Port Ethernet Switch

CrestronSKU: HD-RX-4K-410-C-E-SW4
No reviews
Price:
$3,356.00

Description

Spec Sheet

The Crestron HD‑RX-4K-410-C-E-SW4 multiformat AV switch and receiver provides enhanced HDMI® video switching and audio presentation capabilities in areas such as conference rooms and classrooms. The HD‑RX-4K-410-C-E-SW4 provides two DM Lite® inputs for connection to up to two DM Lite 4K60 4:2:0 transmitters. For a list of supported DM Lite transmitters, refer to Online Help Answer ID 1001796.

A CATx (CAT5e or higher) twisted pair cable connects a DM Lite transmitter to the HD‑RX-4K-410-C-E-SW4 for the transmission of HDMI signals. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).1

NOTE: Power is transmitted over the CATx cable that connects the HD‑RX-4K-410-C-E-SW4 to a DM Lite transmitter. The HD‑RX-4K-410-C-E-SW4 can power two transmitters simultaneously.

In addition to two DM Lite inputs, the HD‑RX-4K-410-C-E-SW4 provides two HDMI inputs that can be connected to local AV sources.

  • 4K/60 4:2:0 capability
  • Two DM Lite® ports for interoperability with up to two DM Lite transmitters (certain models only)
  • Two HDMI® inputs
  • One HDMI output with 4K scaler
  •  4-port Gigabit Ethernet switch with two PoE+ ports
  • Two stereo line level inputs, two mono microphone inputs, and one mono auxiliary audio input
  • Built-in amplifier with 25 W per channel for 4- or 8-ohm stereo speakers
  • Two stereo auxiliary outputs
  • IR, RS-232, relay, and I/O control ports
  • CEC (Consumer Electronics Control) capability
  • Automatic switching of inputs
  • 6x2 audio mixing capability
  • EDID management
  • HDCP management including HDCP 2.2 support
  • Built-in web interface for easy configuration and monitoring
  • Compatibility with Crestron® 3-Series® or later control systems
  • .AV Framework™ technology support
  • Crestron XiO Cloud® service support
  • Native integration with Cisco Webex® and Touch 10 devices
  • Compact surface-mount design
Switcher 4x1 auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies
Scaler (HDMI Output) 4K video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
Input Signal Types HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ interface compatible3) on Inputs 1-2, DM Lite with Deep Color and 4K on Inputs 3-4
Output Signal Types HDMI with Deep Color and 4K (DVI compatible4)
Copy Protection HDCP 2.2
Maximum Resolutions Common resolutions are listed below for the HDMI and DM Lite inputs.
Scan
Type		 Resolution Frame
Rate		 Color
Sampling		 Color
Depth
Progressive 4096x2160 DCI 4K and 3840x2160 4K UHD 24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
NOTES:
  • Custom resolutions are supported at pixel clock rates up to 300 MHz.
  • Interlaced video sources are not supported.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Recently viewed