Crestron USB-EXT-3 KIT USB 3.2 Extender over CAT 6a/7 Cable, Local and Remote
Crestron USB-EXT-3 KIT USB 3.2 Extender over CAT 6a/7 Cable, Local and Remote is backordered and will ship as soon as it is back in stock.
Shipping Now*
Shipping Now*
Free Ground Shipping over $250.00
Crestron USB-EXT-3 KIT USB 3.2 Extender over CAT 6a/7 Cable, Local ...
The Crestron USB-EXT-3 KIT is a useful tool for extending USB 3.2 peripherals, like UC soundbars and cameras. The standard 3.2 cable length is only 6 ft (1.8 m), which is not sufficient for most conference rooms and meeting spaces. With the USB-EXT-3 KIT, you can extend all USB signals up to 330 ft (100 m) over CAT 6a/7 cable at high speeds of up to 5 Gbps.
When it comes to supporting USB signals, it's important to use reliable USB transport technology. The USB-EXT-3 KIT is specifically designed to support USB 3.2 isochronous (ISO) transport, which means it offers a higher level of support for UC cameras and video capture devices. With this technology, USB traffic is given a guaranteed percentage of all USB bandwidth, ensuring that other devices connected to the USB port, like bulk storage devices, won't affect the performance of the ISO stream. This results in high-quality video performance.
The Crestron USB-EXT-3 KIT consists of the USB-EXT-3-LOCAL and USB-EXT-3-REMOTE extenders, which are used with each other in point-to-point USB extender applications:
- The USB-EXT-3-LOCAL provides connectivity for a single USB host such as a computer. The extender supports plug-and-play functionality with a USB host running Windows®, macOS®, Linux®, and Chrome OS™ operating systems. No additional driver installation is required.2
- The USB-EXT-3-REMOTE provides connectivity for up to four USB Type-A devices such as USB cameras and video capture devices at one location.2 The extender is expandable to support up to 30 USB devices with the connection of up to three USB hubs (not included).
A Gigabit Ethernet pass-through port is included on each extender for connection to a network or network-enabled device.
Spec SheetFeatures
- Point-to-point connectivity for USB signal extension over CAT6a/CAT7 up to 330 ft (100 m)
- USB 3.2 Gen 1 data rate up to 5 Gbps
- Support of USB 3.2, 2.0, and 1.1 signals simultaneously
- Support of all USB transfer types: control, interrupt, isochronous (ISO), and bulk
- Enhanced support for USB cameras and video capture devices using ISO transport
- USB-EXT-3-LOCAL extender for connection to USB host
- USB-EXT-3-REMOTE extender for connection to up to four USB devices at one location
- Gigabit Ethernet pass-through port
- Plug-and-play functionality without the need for additional drivers
- Compatibility with the Windows®, macOS®, Linux®, and Chrome OS™ operating systems
- Freestanding or surface mountable (optional mounting kit included)
- 24 VDC power pack included for each extender
Specifications
| Communications | ||
| Link | Proprietary link for point-to-point connection between the USB-EXT-3-LOCAL and USB-EXT-3 REMOTE | |
| USB | Speeds:
USB 3.2 Gen 1 up to 5 Gbps; |
|
| Ethernet | 100BASE-TX/1000BASE-T for LAN passthrough | |
| Connectors – USB-EXT-3-LOCAL | ||
| 24V 1A | DC power connector; 24 VDC power input3 |
|
| USB | (1) USB Type-B connector, female; USB 3.2 Gen 1 host port for connection to computer, media server, game console, or other USB host;2 Backward compatibility with USB 2.0 and USB 1.1 |
|
| Link | (1) 8-pin RJ-45 connector, female; Connects directly to Link port on USB-EXT-3-REMOTE;4 Up to 330 ft (100 m) over CAT6a/7 cable1 |
|
| LAN | (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T for passthrough connection to Ethernet network or network-enabled device; Up to 330 ft (100 m) over CAT5e or higher cable |
|
| Config | Reserved for factory use only | |
| Connectors – USB-EXT-3-REMOTE | ||
| 24V 2.71A | DC power connector; 24 VDC power input3 |
|
| USB | (4) USB Type-A connector, female; USB 3.2 Gen 1 device ports for connection to USB cameras, video capture devices, flash drives, keyboards, mice, hubs, or other USB devices;2 Maximum number of USB hubs supported: 3 Backward compatibility with USB 2.0 and USB 1.1; Available Power: 1.2A (6W) per USB port |
|
| Link | (1) 8-pin RJ-45 connector, female; Connects directly to Link port on USB-EXT-3-LOCAL4 Up to 330 ft (100 m) over CAT6a/7 cable1 |
|
| LAN | (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T for passthrough connection to Ethernet network or network-enabled device; Up to 330 ft (100 m) over CAT5e or higher cable |
|
| Config | Reserved for factory use only | |
| Controls and Indicators | ||
| Power | (1) LED. Green indicates that power is being supplied from the included power pack. | |
| Mode | Reserved for factory use only | |
| Status | (1) LED. Solid green indicates that the system is functioning normally. Flashing green indicates that the system is booting or may also indicate a temperature warning in unison with the Link, USB 2, and USB 3 LEDs. | |
| Link | (1) LED. Green indicates that a link has been established between the local and remote extenders. | |
| USB 2 | (1) LED. Solid green indicates that a USB 2 connection is detected when a host device is connected to the USB port on the USB-EXT- 3-LOCAL. Flashing green indicates that the USB 2 connection has been suspended or is in sleep mode. | |
| USB 3 | (1) LED. Solid green indicates that a USB 3 connection is detected when a host device is connected to the USB port on the USB-EXT-3-LOCAL. Flashing green indicates that the USB 3 connection has been suspended or is in sleep mode. | |
| LAN | (2) LEDs on RJ-45 connector. Solid green indicates that a link has been established between the extender and the network or network device. Flashing green indicates Ethernet activity. | |
| Power – USB-EXT-3-LOCAL | ||
| Power Pack (Included) | Input: 100-240 VAC, 50/60 Hz Output: 1A @ 24 VDC3 |
|
| Power Consumption | 24W | |
| Power – USB-EXT-3-REMOTE | ||
| Power Pack (Included) | Input: 100-240 VAC, 50/60 Hz Output: 2.71A @ 24 VDC3 |
|
| Power Consumption | 41W (24W allocated to 4 USB devices) | |
| Environmental | ||
| Temperature | Operating: 32° to 122°F (0° to 50°C) Storage: -4° to 158°F (-20° to 70°C) |
|
| Humidity | Operating: 20% to 80% RH (non-condensing) Storage: 10% to 90% RH (non-condensing) |
|
| Heat Dissipation | USB-EXT-3-LOCAL: 81.8 BTU/hr USB-EXT-3-REMOTE: 139.8 BTU/hr |
|
| Acoustic Noise | None (fanless) | |
| Enclosure | ||
| Chassis | Black anodized aluminum | |
| Mounting | Freestanding or surface mountable (optional mounting kit included) | |
| Dimensions | ||
| Height | 1.34 in. (34 mm) | |
| Width | 9.15 in. (233 mm) | |
| Depth | 5.68 in. (144 mm) | |
| Weight | ||
| USB-EXT-3-LOCAL: 2.23 lb (1.01 kg) USB-EXT-3-REMOTE: 2.26 lb (1.03 kg) |
||
At Creartion Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday before 1PM PST ship the same day. Orders placed after 1PM will ship the next day of business. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Creation Networks Nationwide Audiovisual Services - Sales, Design, Programming, Installation & Support - A Partner You Can Trust.
Creation Networks offers audiovisual & video conferencing equipment and professional services for projects of all sizes - from a single meeting room to a nationwide AV deployment. You can count on us for your audiovisual technology sales, design, configuration, programming, installation, and support. It is important that you get Top Quality products from the best manufacturers, and then purchase from a trusted partner who tests and installs what they sell, giving you the best value. Our goal at Creation Networks is to only represent the top products, test and install everything before recommending or selling our solutions. Contact us Today ! 1.888.230.3661
