Draper Access E – 11', NTSC – 139105ECU

Product Overview

The Draper Access E is a ceiling-recessed electric projection screen engineered for concealed commercial AV installations. This 11' wide NTSC (4:3) model recesses into a ceiling pocket and lowers a free-hanging viewing surface, making it a clean fit for boardrooms, higher-education classrooms, and training rooms. Built on Draper's non-tensioned Series E platform, it maintains a flat image through the weight of the surface and a bottom dowel rather than tab-tensioning. This unit ships with a low-voltage LVC-IV motor for integration with third-party control systems.

Product Description

The Draper Access E electric projection screen is specified by integrators who need a concealed front-projection surface in a finished ceiling. As a ceiling-recessed motorized screen, the case installs into the ceiling with a trim flange so nothing is visible once the surface retracts. Because this is a Series E free-hanging screen, the viewing surface is non-tensioned and hangs flat under its own weight and the bottom dowel, keeping the mechanism simple and serviceable in long-term commercial deployments. The case can be mounted during the construction phase and wired using quick-connect wiring so the viewing surface is added later to avoid job-site damage. A detachable bottom access panel opens for service and maintenance without pulling the case out of the ceiling. Sliding brackets on top of and inside the case give the installer room to adjust alignment and accommodate different screen sizes. The white case is standard, with black available on request, and maximum image width across the model reaches 16' (488 cm) depending on surface selection. This configuration uses a low-voltage LVC-IV motor, and Quiet and 220V options are available for integration with third-party control systems such as Crestron and Control4. Pair it with a compatible unit from our commercial projectors collection and a bracket or lift from our projector mounts and lifts collection. Browse the full Draper projection screen lineup for additional sizes, formats, and surfaces, or view all projection screens. Contact Creation Networks at creationnetworks.net for throw-distance planning, configuration support, and lead times.

Key Features

• Ceiling-recessed concealment — The case recesses into the ceiling with a trim flange so the screen is completely hidden when retracted.
• Free-hanging Series E surface — The non-tensioned viewing surface is held flat by its own weight and a bottom dowel, with no tab-tensioning to maintain.
• Low-voltage LVC-IV motor — A low-voltage control interface for integration with third-party automation systems.
• Early case installation — The case mounts during construction with quick-connect wiring so the surface can be added later to prevent job-site damage.
• Detachable bottom access panel — The bottom panel opens for service and maintenance without removing the case from the ceiling.
• Adjustable mounting brackets — Sliding brackets on top of and inside the case allow alignment adjustment and accommodate different screen sizes.
• White case standard — A finished white case is standard, with black available on request.
• Draper warranty through an authorized dealer — UL Listed and supplied by Creation Networks with Draper's 5-year manufacturer warranty.

Typical Applications

• Corporate boardrooms requiring a concealed ceiling-recessed screen
• Higher-education classrooms and lecture spaces
• Training rooms with permanent front projection
• Commercial meeting spaces and multi-purpose rooms
• Government spaces needing a finished, hidden screen when idle

Technical Specifications

Specifications sourced from Draper, Inc. (draperinc.com). Confirm exact viewable dimensions, surface selection, and control options with Creation Networks before ordering.

Frequently Asked Questions

Is the Access E a tab-tensioned screen?

No. The Access E is a Draper Series E screen, which is free-hanging and non-tensioned. The viewing surface hangs flat under its own weight and a bottom dowel rather than using tab-tensioning.

How is the Access E installed?

It is a ceiling-recessed electric screen. The case is set into a ceiling pocket with a trim flange, and it can be mounted during construction with quick-connect wiring so the surface is added later to avoid job-site damage.

What projectors and mounts work with this screen?

It pairs with any commercial front projector matched to the 11' NTSC (4:3) format and your room's throw distance. Browse our commercial projectors and projector mounts and lifts, or contact us for a throw-distance calculation.

Can it integrate with a Crestron or Control4 system?

Yes. This configuration includes a low-voltage LVC-IV motor, so integrators can tie the screen into third-party automation systems alongside the standard 110V 3-position switch. Quiet and 220V options are also available.

What is the NTSC (4:3) format best suited to?

The 4:3 NTSC format suits legacy document cameras, data projection, and rooms standardized on 4:3 content. Contact us if you need to confirm the right aspect ratio for your source equipment.

What warranty and support are included?

The Access E is UL Listed and carries Draper's 5-year manufacturer warranty, supplied through Creation Networks as an authorized dealer. Contact us at creationnetworks.net for pre-sale specification help and post-sale support.