Netgear APS600W-100NES Modular Power Supply Unit (600W)

Product Overview

The NETGEAR APS600W-100NES is a 600W hot-swappable modular power supply unit for the M4300 series chassis switches. It seats into an available PSU bay on supported M4300 models to provide power redundancy or expand the available power budget. With a 110V-240V AC input range, it supports both North American and international AV rack deployments. The unit is supplied as a field-installable module for high-availability commercial AV and networking installations.

Product Description

This modular PSU is specified by NETGEAR as a power supply unit for the M4300-16X (PB) and M4300-96X switches. Installing a second supply gives the chassis 1+1 power redundancy, so a single PSU failure will not interrupt connected AV-over-IP streams, PoE devices, or uplinks. The same redundant supply also adds headroom to the chassis power budget on supported models. The unit uses a standard C14 inlet and accepts 110V-240V AC input, delivering up to 600W output at 110/220V AC. As a hot-swappable module, it can be replaced without taking the switch offline on chassis that support online PSU service. Keeping a spare on hand reduces mean time to repair for production AV racks where uptime is critical.

Key Features

• 600W modular supply — Hot-swappable module delivering up to 600W output at 110/220V AC for M4300 chassis switches.
• Wide AC input — Accepts 110V-240V AC through a standard C14 connector for domestic and international power.
• 1+1 redundancy — A second unit provides redundant power so a single PSU failure will not drop the switch.
• Power budget headroom — A redundant supply adds capacity to the chassis power budget on supported models.
• Field serviceable — Hot-swap design allows replacement without taking the switch offline on chassis that support it.
• 5-year hardware warranty — Backed by a NETGEAR limited 5-year hardware warranty.

Typical Applications

• Redundant (1+1) power for M4300-16X (PB) and M4300-96X chassis switches
• Power budget expansion on supported M4300 chassis switches
• Field PSU replacement or spares for high-availability AV racks

Technical Specifications

Specifications are sourced from NETGEAR product documentation and are subject to change. Verify PSU compatibility against your specific switch model before ordering.

Frequently Asked Questions

Which switches accept the APS600W-100NES?
NETGEAR specifies this PSU as a power supply unit for the M4300-16X (PB) and M4300-96X switches. Confirm your model before ordering.

Can I run two supplies for redundancy?
Yes. A second supply provides 1+1 redundancy so the switch keeps running if one PSU fails, and adds power budget headroom on supported chassis.

Is it hot-swappable?
It is a hot-swappable module and can be replaced without powering down the switch on chassis that support online PSU service.

What power input does it use?
It accepts 110V-240V AC through a standard C14 connector and delivers up to 600W output at 110/220V AC.

What warranty is included?
It is backed by a NETGEAR limited 5-year hardware warranty.

Why Buy from Creation Networks

As an authorized NETGEAR reseller, Creation Networks helps you size power supplies and plan redundancy for M4300 chassis switch deployments. Browse our full NETGEAR collection or contact our team for volume and project quotes. Pricing is subject to change.