Lightware UBEX-Pro20-HDMI-F110 RED 2MM Optical AV Over IP Video System for 10G Networks - 91820103

Product Overview

The Lightware UBEX-Pro20-HDMI-F110 RED 2MM is an F-type (transmitter) AV-over-IP node in the UBEX Pro20 HDMI series, shipping with two multimode (MM) SFP+ fiber transceivers pre-installed. The F110 chassis offers dual SFP+ optical ports and ships ready for deployment on multimode fiber infrastructure. This unit targets commercial AV integrators building medium-distance fiber-based AV-over-IP systems — such as within a building or between adjacent buildings — where multimode fiber is the installed medium. It transmits uncompressed 4K HDMI 2.0 over 10 Gigabit Ethernet with zero-latency signal processing. Search terms: Lightware UBEX Pro20 HDMI F110 multimode fiber transmitter, 10G AV over IP multimode SFP+ encoder, uncompressed 4K HDMI 2.0 MM fiber AV-over-IP.

Product Description

The UBEX-Pro20-HDMI-F110 RED 2MM transmits an uncompressed HDMI 2.0 IP stream over 10GbE via two included multimode SFP+ transceivers. Multimode fiber provides cost-effective optical connectivity for shorter-to-medium distances typical of intra-building AV distribution. The F110 chassis provides two SFP+ ports — supporting dual-link configuration for redundancy or dual independent streams — compared to the single-link F100.

Signal quality is preserved at full HDMI 2.0 bandwidth — 4K/60Hz 4:4:4, HDR, HDCP 2.2, and 8-channel audio — with no compression in the transport path. The unit integrates with Lightware Device Controller (LDC) for routing and monitoring, and exposes RS-232, TCP/IP, and USB control interfaces for Crestron, AMX, Extron, and Q-SYS integration. The 1RU chassis is rack-mountable for equipment room installation.

Key Features

• Two multimode SFP+ transceivers included — ready for deployment on MM fiber infrastructure
• F110 chassis — dual SFP+ ports — supports dual-link redundancy or dual independent connections
• Uncompressed HDMI 2.0 over 10GbE — 4K/60Hz 4:4:4 with no compression
• HDR and deep color support — HDR10 and Dolby Vision passthrough
• HDCP 2.2 and 1.4 compliant — protected content distribution
• 8-channel audio support — PCM and HBR audio (Dolby TrueHD, DTS-HD MA)
• Zero-latency signal path — sub-frame uncompressed processing
• LDC software integration — centralized management via Lightware Device Controller
• Third-party control interfaces — RS-232, TCP/IP, USB
• 1RU rack-mountable chassis — standard equipment room installation

Typical Applications

• Intra-building fiber AV-over-IP distribution
• Conference room and boardroom multimode fiber AV
• Corporate campus AV on existing MM fiber backbone
• Training room signal distribution
• Government facility AV on multimode fiber

Technical Specifications

Competitor Comparison

Frequently Asked Questions

What is the maximum distance for multimode fiber on this unit?

Distance depends on the specific SFP+ transceiver included. Typical 10GbE multimode SFP+ SR modules support up to 300m on OM3 and 400m on OM4 fiber. Verify the included transceiver datasheet for exact specifications.

How does the F110 differ from the F100 chassis?

The F110 provides dual SFP+ ports compared to the F100's single-port architecture, enabling dual-link configurations for redundancy. Both are transmitter (F-type) nodes in the UBEX Pro20 HDMI series.

Can the dual SFP+ ports operate as two independent links?

The dual ports support redundant link configurations. The specific operating mode (active/standby redundancy versus dual independent links) depends on the system configuration in Lightware Device Controller.

Is multimode fiber more cost-effective than single-mode for this application?

Multimode fiber transceivers are generally lower cost than single-mode, making the 2MM variant cost-effective for intra-building distances. For longer inter-building runs, single-mode (SM) variants provide necessary reach.

Where can I purchase this product?

The UBEX-Pro20-HDMI-F110 RED 2MM is available from Creation Networks, an authorized Lightware commercial AV reseller.