Renkus-Heinz ICL-F-DUAL-RD - Black is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
ICL-F-DUAL-RD
IC Live arrays provide an elegant solution to long standing acoustical problems with slim enclosures that blend into any environment. Individual driver control maximizes the acoustical advantages of this design. The result is unsurpassed vertical pattern control – essential for delivering intelligible speech in reverberant spaces. IC Live beams can be steered up or down while the array remains vertical – and nearly invisible.
IC Live arrays are also powerful. Their 6.5 inch neodymium low frequency transducers and 1 inch throat titanium nitride coated high frequency drivers produce surprisingly high sound levels for their size. They are equally at home delivering a quiet sermon in a reverberant cathedral, cutting through the crowd noise in a gym during a close basketball game or shaking the walls with rock music in a club.
ICL-F-DUAL-RD
IC Live for Fixed Installations
IC Live arrays use advanced digital beam steering technology to deliver impeccable sound while staying in the background visually.
Adaptable, Articulate, Invisible
Digital beam steering puts IC Live output where it belongs: on the audience, and way from walls and ceilings.
Computer software lets you define the opening angles for as many as four sonic beams from each ICL-F-RN array module (up to 8 beams from an ICL-F-RN Dual) and aim them up or down. Meanwhile, the slim enclosure stays vertical and inconspicuous.
Two ICL-F-RN modules and an ICL-LM-F-RN module can be stacked for even tighter control and higher output.
Powerful, Accurate, Musical, Scalable
Iconyx transparent technology controls sound with the most advanced, intelligent DSP. Multi-channel Class D digital amplifiers with integral DSP engines control every single array element with programmable precision.
High-current audiophile output stages power each individual lightweight, efficient transducer in the Iconyx array. Even at 100 feet, SPL is an impressive 107 dB (110 dB when stacked). Output is flat from 75 Hz to 18 kHz.
Low frequency energy can be extended to 40 Hz or below with matching subwoofers.
Two IC Live arrays can be combined for added output and control. When full range musical output is important to the program, one or two IC215-S dual 15-inch subwoofers can be added to either array.
One-Touch Presets, Intuitive Software
RHAON empowered IC Live arrays provide a full set of remote control and supervision functions, along< with the ability to store up to ten preset configurations in memory.
The presets adapt the arrays’ 150° wide horizontal coverage for typical applications such as hotel meeting rooms or auditoriums.
For more complex situations, Iconyx BeamWare software makes it easy to shape the array’s coverage to the audience area.
Technical Information |
||
Sensitivity: | 1.4 V (for rated power output) | |
Freq. Range: | 90 Hz to 12 kHz (-3 dB)
75 Hz to 18 kHz (-10 dB) |
|
Max SPL: | 140 dB peak, 110 dB @ 100 Ft. (30.5 m) | |
Horiz. Dispersion: | 150° up to 3 kHz; 120° above 3 kHz | |
Vert. Opening Angles: | 5°, 10°, 15° and 20° | |
Aiming Angle: | Adjustable from -30° to +30° | |
Typical Throw: | 160 Ft. (50 meters) | |
Power Consumption: | Idle: 0.7 A (120 V) / 0.35 A (240 V)
1/8 Power: 3.2 A (120 V) / 1.6 A (240 V) (onset of limiting) 1/3 Power: 8.53 A (120 V) / 4.27 A (240 V) (hard limiting) |
|
Beam Control: | Effective down to 400 Hz | |
No. Transducers – Each Module: | Five 6.5-inch cone transducers with neodymium magnets Three 1-inch HF titanium nitride compression drivers (per module) | |
No. Amp. Channels: | 8 (per module) | |
Inputs: | Analog Audio: 2 balanced inputs on Phoenix ConnectorsAES/EBU: Phoenix ConnectorDual RJ45 connectors for Ethernet Control and redundant Dante connectivity | |
Computer Controls: | Gain, Mute On/Standby Input SelectionCompression8-Band Parametric EQShelving &Rolloff FiltersDelayPreset Configuration Selection | |
Power Connector: | IEC power connector | |
Status Indicators: | Power, Signal, Overdrive, Thermal, Mute, Input Pad, Preset Configuration Readout | |
Network Digital Format: | 16 or 24 bit PCM; 48 or 96 kHz sample rate; selectable network latency | |
Hanging Method: | Metric M10 attachment points and hinge kits (Hinge Kit included with the product) | |
Enclosure: | Finnish Birch with perforated steel grille | |
Finish: | Standard finish: white paintOptional finishes: black and custom color paint, weather resistant | |
Weight: | 114 Lbs (51.7 Kg) Net | |
Dimensions: | 95” H x 8” W x 7” D(241.5 cm x 20. cm x 17.8 cm) |
At Creartion Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Creation Networks Nationwide Audiovisual Services - Sales, Design, Programming, Installation & Support - A Partner You Can Trust.
Creation Networks offers audiovisual & video conferencing equipment and professional services for projects of all sizes - from a single meeting room to a nationwide AV deployment. You can count on us for your audiovisual technology sales, design, configuration, programming, installation, and support. It is important that you get Top Quality products from the best manufacturers, and then purchase from a trusted partner who tests and installs what they sell, giving you the best value. Our goal at Creation Networks is to only represent the top products, test and install everything before recommending or selling our solutions. Contact us Today! 1.888.230.3661