Crestron DM-NAX-BTIO-1G DM NAX® Audio-over-IP Wall Plate with Bluetooth® Audio Support, Analog Audio Input and Output, 1‑Gang

Crestron SKU: DM-NAX-BTIO-1G
No reviews

Price:
Sale price$950.00

Description

Available Starting March 29th, 2024

The DM‑NAX‑BTIO‑1G is a DM NAX encoder and decoder with support for Bluetooth wireless and analog line-level wired audio input and output, housed in a single-gang wall plate form factor. The front panel features an OLED display and four buttons for device pairing and menu navigation. Two 1/8 in. (3.5 mm) TRS connectors for stereo unbalanced analog line-level audio input and output are concealed under a front panel door. The rear panel of the wall plate features an Ethernet connection for PoE, Audio over IP (AoIP), and control.

DM NAX is built on the AES67 standards with additional ease of configuration via a web interface, SIMPL Windows, C#, and/or a RESTful API. It is compatible with DM NVX through the AES67 secondary audio stream and also with third-party AES67 solutions and Dante via the compatibility mode enabled through Dante Controller.

Bluetooth Wireless Connectivity
Bluetooth wireless audio support is built-in to the DM‑NAX‑BTIO‑1G, allowing a stereo audio signal to be transmitted from a smart phone or other source device to the wall plate. This stereo signal can be output as a DM NAX AoIP stream onto the network or as an unbalanced line-level analog signal from the local 3.5 mm audio output connector. Metadata for the Bluetooth audio stream can be displayed on the front panel, and up to seven previous source device connections can be recalled.

Audio-over-IP
DM NAX takes audio distribution to a whole new level by putting it on the network. The DM‑NAX‑BTIO‑1G sends and receives DM NAX and AES67 encoded audio over a standard IP network. A single DM NAX system can handle audio distribution between 32 DM NAX devices and supports up to 256 audio output zones. DM NAX devices can seamlessly pull and distribute the audio from DM NVX sources.

Encoder and Decoder Functionality
The DM‑NAX‑BTIO‑1G can operate as a network AV encoder and decoder. The local input sources on the wall plate can be sent as AoIP streams to DM NAX, Dante, or AES67 capable devices. Simultaneously, the DM‑NAX‑BTIO‑1G can receive AoIP streams from these same devices and decode them for local output.

Front Panel Controls and Display
The DM‑NAX‑BTIO‑1G features four front panel push buttons and a 128 x 64 dot matrix OLED display. The push buttons allow local volume control and Bluetooth pairing, with volume feedback and pairing status reflected in real time on the display. Metadata for Bluetooth media and basic configuration menus are also shown on the display.

Both the display and push buttons can be disabled via the configuration web interface or programming for applications where a more discreet or secure installation is required.

 
  • Built-in Bluetooth® wireless audio input support
  • Front panel OLED display provides metadata readout and device setup menus
  • Single-gang U.S. wall box installation
  • Power over Ethernet (PoE) network powered
  • Stereo unbalanced analog line-level audio input and output via 3.5 mm TRS connectors
  • Mountable in a standard US electrical box or on a rack rail via included hardware
  • Connects directly to a managed network to route to or from other DM NAX® and DM NVX® devices
  • Interoperable with Dante® audio networking devices via AES67 compatibility
  • Streamlined configuration through front panel push buttons and a web interface
  • Seamless Crestron system integration with Crestron Home® OS and SIMPL Windows programming
Audio
Input Signal Types Unbalanced stereo analog line-level;
Stereo Bluetooth wireless;
DM NAX/AES67 audio-over-IP
Output Signal Types Unbalanced stereo analog line-level;
DM NAX/AES67 audio-over-IP
Source Compensation ±10.0 dB per input
Input Monitoring Source Signal Detect
Frequency Response (at line-level output) 20 Hz to 20 kHz ±0.5 dB
THD+N (at line-level output) 0.005% @ 1 kHz, max output
S/N Ratio (at line-level output) From line-level input: 108 dB, 20 Hz to 20 kHz, A‑weighted;
From digital input: 111 dB, 20 Hz to 20 kHz, A‑weighted
Balance Control Left/right adjustable
Communications

Ethernet

For control and PoE, AoIP, and/or console, 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
Bluetooth For audio input, Bluetooth 5.3 sink device, recalls up to seven previously paired devices, persistent or non persistent pairing, exclusive or interrupting connection modes
Connectors
IN (1) 3.5 mm connector, female TRS;
Unbalanced line-level audio input;
Maximum input level: 2Vrms;
Input Impedance: 10 kΩ
OUT (1) 3.5 mm connector, female TRS;
Unbalanced line-level audio output;
Maximum output level: 2Vrms;
Channel separation: 80 dB @ 1 kHz;
Output Impedance: 100 Ω
G (1) 6-32 screw;
Chassis ground lug
ETHERNET PoE (1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port
Controls and Indicators
Front Panel Display

(1) OLED screen, 128 x 64 dot matrix
Height (active area): 0.43 in. (11 mm)
Width (active area): 0.86 in. (22 mm)
Displays metadata, menus, and volume feedback

Menu (1) Push button
Used to enter the front panel menu and select menu items
Bluetooth (1) Push button
Used to initiate Bluetooth pairing
UP and DOWN Arrows (2) Push buttons
Used to navigate menus and control volume
ETHERNET PoE Left amber LED indicates 1000 Mb link status;
Left green LED indicates 100 Mb link status;
Flashing right amber LED indicates Ethernet activity
SETUP

(1) Push button: Used for factory reset procedures;
(1) LED, illuminates red when the button is pressed, flashes red when reset has been initiated

Power
PoE IEEE 802.3af Class 0 (12.95 W) compliant;
Compatible with IEEE 802.3af compliant Ethernet switch or third-party PoE compliant PSE
Power Consumption 3.5 W
Environmental
Temperature 32° to 95° F (0° to 35° C)
Humidity 10% to 95% RH (noncondensing)
Heat Dissipation 11.95 BTU/hr
Construction
Chassis Metal, black and silver finish, vented sides
Mounting Mountable on the following:
1-gang U.S. electrical box or plaster ring (not included), 3.5 in. (26 mm) electrical box depth recommended;
Rack rail
Dimensions
Height 4.12 in. (105 mm)
Width 1.76 in. (45 mm)
Depth 2.25 in. (57 mm)
Weight
4.8 oz. (136 g)

At Creartion Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.

  • Most in-stock orders placed Monday-Friday before 1PM PST ship the same day. Orders placed after 1PM will ship the next day of business. General restrictions apply; please see our full shipping policy here.
  • We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Nationwide Audiovisual Services - Design, Installation & Support - A Partner You Can Trust

Creation Networks offers audiovisual & video conferencing services for projects of all sizes - from a single meeting room to a nationwide deployment. You can count on us for your audiovisual technology system's design, configuration, programming, installation, and support. It is important that you get Top Quality products from the best manufacturers, and then purchase from a trusted partner who tests and installs what they sell, giving you the best value. Our goal at CreationNetworks.net is to only represent the top products and test everything before recommending or selling our solutions.

Certifications

Our AV experts have earned their professional certifications to design, build, and manage the best AV services for you. View Our Certifications

Product Selection

Choose from products and national brands to find the right technology for your needs. View Our Vendor Partners