The IR T2 commercial-grade, medium-area infrared transmitter. Its sleek, compact footprint is ideal for assistive listening and language interpretation in commercial spaces such as conference rooms, assisted living facilities, small cinema/theaters, classrooms and courtrooms. The new IR T2 infrared transmitter offers 50 percent greater coverage than the previous IR device (WIR TX75) and new control system readiness — all at a more affordable price. With a significantly wider coverage pattern and more power, there is no need for the additional expense of secondary units.
System Includes
(1) IR T2 infrared transmitter
(1) BKT 024 wall / ceiling mounting bracket
(1) TFP 057 international power supply with line cord
How It Works
The IR T2 can be controlled remotely via RS-232 commands. The commands include:
- Powering the unit on/off
- Remotely setting the IR frequency (2.3/2.8 or 3.3/3.8)
- Muting the outgoing audio without powering off
- Turning back panel LEDs on or off
- Troubleshooting abilities
A full list of commands is available on the downloads tab in the IR T2 Programmer’s Guide.
Specifications
IR T2
|
Dimensions:
|
9.0″ W (229 mm) x 3.8″ D (97 mm) x 1.4″ H (36 mm)
|
|
Weight:
|
0.84 lb. (0.38 kg)
|
|
Color:
|
Black
|
|
Power Supply:
|
TFP 057 Desktop style international certified power supply with IEC line cord, 100-240 VAC input, 50-60 Hz, 18 W; 48 VDC output
|
|
DC Power Input:
|
2.1 mm ID barrel connector, 48 VDC, 0.2A, center positive
|
|
Power Indicator:
|
Green LED
|
|
Sleep/Power Save Mode:
|
Shuts off IR when no audio present for 12 minutes
|
|
Modulation:
|
FM Wideband, ±50 kHz deviation max, 50 μS pre-emphasis
|
|
Baseband Frequencies:
|
2.3, 2.8, 3.3, 3.8 MHz
|
|
Coverage Area:
|
Up to 18,000 sq. ft (1,673 sq. m) in single-channel mode with the RX22-4 receiver
Up to 11,500 sq. ft (1,068 sq. m) with the RX20 receiver
|
| Microphone gain adjust: |
Rotary 10 dB range |
| Microphone channel switch: |
Selects microphone input to Ch. A or Ch. B |
| Microphone input: |
3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (6 VDC bias supply with 2.7 k ohm series resistor) |
|
Audio Inputs:
|
Line inputs: Phoenix style connector jack for Ch A and Ch B accept line level, balanced or unbalanced audio
|
|
Audio Indicators:
|
One yellow LED per channel. Lights up and stay on steady with minimum audio level.
|
|
Signal-to-Noise Ratio:
|
70 dB (line input)
|
|
Frequency Response:
|
95 Hz to 17.6 kHz, -3 dB re 1 kHz (line inputs)
125 Hz to 17.0 KHz, -3 dB re 1 kHz (microphone input) |
|
Operating Requirements:
|
32°-122°F (0-50°C)
|
|
Mounting Kit:
|
Wall or Ceiling mount: BKT 024 Omnidirectional mount
|
|
Compatible Receivers:
|
WIR RX22-4, IR RX20
|
|
Warranty:
|
5-year warranty against component failure and manufacturing defects. See Full Warranty statement on the website for details.
|
|
Approvals/Regulatory Compliance:
|
CE, FCC, Industry Canada, WEEE, RoHS, CB Scheme, RCM, PSE
|
Warranty
5 Years
