{"product_id":"tascam-ca-xlr2d-n-xlr-mic-adapter-for-cameras-nikon","title":"Tascam CA-XLR2d-N – XLR Mic Adapter for Cameras (Nikon)","description":"\u003ch2\u003eWhat is the Tascam CA-XLR2d-N?\u003c\/h2\u003e\n\u003cp\u003eThe Tascam CA-XLR2d-N is a dual-channel XLR microphone adapter built specifically for Nikon mirrorless cameras, most notably the Nikon ZR. It adds two professional balanced XLR inputs with phantom power, a high-headroom mic preamp, and a direct digital audio path into the camera's accessory shoe, replacing the compressed 3.5mm mic input most cameras ship with. It is the tool of choice for video production teams, ENG shooters, and multi-camera broadcast crews who need broadcast-grade XLR mic adapter for cameras performance without carrying a separate field recorder. For any team standardizing Nikon-based video production on professional XLR audio input for Nikon cameras, this adapter is the direct path to clean, interference-free sound.\u003c\/p\u003e\n\u003ch2\u003eHow does the Tascam CA-XLR2d-N work?\u003c\/h2\u003e\n\u003cp\u003eThe CA-XLR2d-N mounts to the base of a compatible Nikon camera and connects through the camera's accessory shoe, where supported, to pass audio digitally rather than through an analog 3.5mm cable. That digital connection avoids the noise floor and gain-staging compromises inherent to a camera's built-in mic input, which matters for any production monitoring audio through headphones on set or in a control room. Two combo XLR\/TRS inputs handle balanced dynamic and condenser microphones with switchable +48V phantom power, while a third 3.5mm input accepts a lavalier mic with plug-in power for run-and-gun interview setups. Each input runs through Tascam's HDDA mic preamp design with a 66dB gain range and selectable attenuator pads, giving operators the headroom to work with both quiet lavs and hot handheld mics without re-patching. A 1+2 LINK function ties both channel faders together for stereo pairs, while onboard auto level, a switchable low-cut filter, and a limiter provide a safety net for unattended or single-operator shoots. Latency-free direct monitoring lets a mixer or camera operator check XLR mic adapter for cameras audio in real time through the built-in headphone jack, independent of the camera's own audio processing. Because the unit runs on two AA batteries or draws power through the camera's accessory shoe, it stays lightweight and rig-friendly for handheld, gimbal, and tripod work alike. This makes the CA-XLR2d-N a natural fit for broadcast studio and field production workflows moving from consumer-grade mic inputs to a proper professional video production audio adapter. For crews standardizing across camera brands, the same platform is available as the Tascam CA-XLR2d-C for Canon, the Tascam CA-XLR2d-F for Fujifilm, and the Tascam CA-XLR2d-AN for cameras with a standard 3.5mm analog mic input, so a multi-camera bay can run identical audio front-ends across mixed camera bodies.\u003c\/p\u003e\n\u003ch2\u003eWhat are the key features of the Tascam CA-XLR2d-N?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR\/TRS combo inputs\u003c\/strong\u003e — Accepts balanced dynamic or condenser microphones and line-level sources on a single connector, with switchable +48V phantom power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect digital connection to compatible Nikon cameras\u003c\/strong\u003e — Bypasses the camera's analog mic preamp entirely, delivering cleaner, lower-noise audio to the recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDDA mic preamp with 66dB gain range\u003c\/strong\u003e — Provides enough clean gain for quiet lavalier mics and enough headroom for loud sources without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird 3.5mm lavalier input with plug-in power\u003c\/strong\u003e — Adds a dedicated wireless or wired lav input alongside the two XLR channels for interview and presenter setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1+2 LINK function\u003c\/strong\u003e — Locks the two main channel level controls together for fast, accurate stereo mic adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard auto level, low-cut filter, and limiter\u003c\/strong\u003e — Protects recordings from clipping and low-frequency rumble during unmonitored or single-operator shoots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatency-free direct monitoring\u003c\/strong\u003e — Lets the operator confirm audio quality through headphones independent of camera processing delay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual power options\u003c\/strong\u003e — Runs on two AA batteries or draws power from the camera's accessory shoe for a lighter on-camera rig.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact, camera-matched form factor\u003c\/strong\u003e — Mounts securely to the camera base without significantly changing balance or handling on a gimbal or shoulder rig.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere is the Tascam CA-XLR2d-N typically used?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBroadcast studio\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"table-layout:fixed; width:100%; min-width:280px; border-collapse:collapse;\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:42%;\"\u003e\n\u003ccol style=\"width:58%;\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNikon mirrorless cameras (Nikon ZR and other verified-compatible models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eINPUT 1\/2: balanced XLR-3-31 equivalent \/ 6.3mm TRS combo, mic or line level; INPUT 3: 3.5mm (1\/8\") stereo mini jack with plug-in power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhantom power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+48V, switchable per channel on INPUT 1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMic gain range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e66dB, with 0dB \/ 20dB \/ 46dB attenuator settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSampling frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e48kHz \/ 96kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBit depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16-bit \/ 24-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-channel stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20Hz–20kHz +0.5dB\/-1.0dB (48kHz); 20Hz–40kHz (96kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEquivalent input noise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-120dBu or less (150Ω termination, maximum gain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDynamic range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e95dB or higher (22kHz LPF, A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5mm (1\/8\") stereo mini jack for camera connection \/ headphone monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 AA batteries (alkaline, NiMH, or lithium-ion) or power via compatible camera accessory shoe; 2.0W max consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0°C to 40°C (32°F to 104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e88.2mm (W) x 119.1mm (H) x 110.0mm (D), excluding protrusions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e341g with mic holder attached, battery holder not attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCA-XLR2d unit, CA-AK1-N accessory shoe mount adapter, CA-AK1-AN cold shoe mount adapter, battery holder, detachable mic holder with shock mount, 3.5mm stereo mini cable, quick guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSpecifications verified from Tascam's official product page: \u003ca href=\"https:\/\/tascam.com\/us\/product\/ca-xlr2d\"\u003etascam.com\/us\/product\/ca-xlr2d\u003c\/a\u003e and its technical specifications subpage.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich cameras is the Tascam CA-XLR2d-N compatible with?\u003c\/strong\u003e The CA-XLR2d-N is built for Nikon mirrorless cameras, including the Nikon ZR, using a direct digital connection through the camera's accessory shoe on supported models, and functions as a standard analog XLR adapter on other cameras via the included battery box configuration. If your production runs a mixed camera fleet, browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/tascam\"\u003eTascam collection\u003c\/a\u003e for the matching CA-XLR2d variant for Canon, Fujifilm, or any camera with a 3.5mm analog mic input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the CA-XLR2d-N require a separate cable or adapter to connect to the camera?\u003c\/strong\u003e No. The CA-AK1-N accessory shoe mount adapter, which enables the digital audio connection to compatible Nikon cameras, ships in the box along with a cold shoe mount adapter for cameras without a digital hot shoe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan this adapter power phantom-powered condenser microphones?\u003c\/strong\u003e Yes. Both XLR\/TRS combo inputs supply switchable +48V phantom power, so standard condenser mics used in broadcast and production audio can be run directly into the unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the CA-XLR2d-N integrate into a broadcast or multi-camera production workflow?\u003c\/strong\u003e It replaces the camera's built-in mic preamp with a dedicated HDDA preamp and delivers audio to the camera digitally on supported models, which keeps signal quality consistent when a Nikon body is mixed into a multi-camera broadcast or ENG setup alongside other pro cameras and external audio sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the CA-XLR2d-N need external power, or can it run on batteries?\u003c\/strong\u003e It can run on two AA batteries (alkaline, NiMH, or lithium-ion) for fully self-contained field use, or draw power through the camera's accessory shoe on supported Nikon models to reduce the number of batteries a crew has to manage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the warranty on the Tascam CA-XLR2d-N?\u003c\/strong\u003e Tascam covers the CA-XLR2d-N under its standard one-year limited warranty on parts and labor from the date of original purchase when bought through an authorized dealer such as Creation Networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes Creation Networks provide support beyond the manufacturer warranty?\u003c\/strong\u003e Yes. As an authorized AV integrator, Creation Networks assists with product selection, camera\/adapter compatibility questions, and ongoing support for production and broadcast equipment purchased through us, in addition to Tascam's standard warranty coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I monitor audio in real time while recording with the CA-XLR2d-N?\u003c\/strong\u003e Yes. The unit provides latency-free direct headphone monitoring, so an operator or mixer can confirm mic levels and signal integrity independent of the camera's own audio processing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tascam","offers":[{"title":"Default Title","offer_id":67591220232428,"sku":"CA-XLR2D-N","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/ca-xlr2d-n_p_nikon_zr_01.jpg?v=1791492042","url":"https:\/\/creationnetworks.net\/products\/tascam-ca-xlr2d-n-xlr-mic-adapter-for-cameras-nikon","provider":"Creation Networks","version":"1.0","type":"link"}