{"product_id":"rgb-spectrum-qpx-brk-4h-cable-retention-bracket-hdmi-outputs-on-qpx-din-and-hin","title":"RGB Spectrum QPX BRK-4H – QuadPlex HDMI Output Retention Bracket","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe QPX BRK-4H is the QuadPlex cable retention bracket that captures the four HDMI output cables leaving a QPX DIN or QPX HIN multi-display processor. It is ordered on installations where the processor is mounted out of reach — inside a rack tray, behind a display, or above a ceiling line — and a single pulled connector would drop a display in the array. Because the QuadPlex chassis is small and light, HDMI cable weight on its own can work a connector loose over time. This HDMI output retention bracket is the vendor accessory that prevents that failure mode, and most integrators specify it with the processor as standard practice.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eQPX BRK-4H is a mechanical part only. It carries no signal, needs no power, and has nothing to configure or firmware to maintain. It mounts at the output end of the QuadPlex chassis and holds all four HDMI output cables so that downward or lateral pull is taken by the bracket instead of by the connector shells. That protection matters most in commercial deployments where a service visit costs more than the bracket does: video wall segments driven from a ceiling-mounted processor, digital signage clusters in public areas, and control room positions where the head-end is behind locked millwork.\u003c\/p\u003e\u003cp\u003eThe bracket serves both QuadPlex input variants. Order it with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-din-quadplex-processor-1-displayport-1-2-input-4-hdmi-outputs\"\u003eQPX DIN\u003c\/a\u003e when the source feeds the processor over DisplayPort 1.2, or with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-hin-quadplex-processor-1-hdmi-2-0-input-4-hdmi-outputs\"\u003eQPX HIN\u003c\/a\u003e when the source is HDMI 2.0. For rack-mount work, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-rak-rackmount-tray-3-horizontal-1ru-or-10-vertical-3ru-quadplex-units\"\u003eQPX RAK\u003c\/a\u003e tray holds multiple QuadPlex units in a single rack space, and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-920-12325-mounting-brackets-with-vesa-mount-for-qpx-din-and-qpx-hin\"\u003e920 12325\u003c\/a\u003e mounting brackets with a VESA mount attach a unit to a wall or to the back of a display. On the input side of an HDMI-fed unit, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-brk-1h-cable-retention-bracket-hdmi-input-on-qpx-hin\"\u003eQPX BRK-1H\u003c\/a\u003e performs the same job for the single HDMI input connector.\u003c\/p\u003e\u003cp\u003eBefore ordering, an integrator should confirm three things: how many of the four HDMI outputs are actually in use, the connector body size of the HDMI cables specified for the job, and whether the processor will sit horizontally in a tray or vertically on a bracket. RGB Spectrum does not publish a dimensioned drawing for this part number, so oversized, locking or right-angle HDMI shells should be checked against the bracket before the order is placed. Quantity is one bracket per processor whose HDMI outputs need retention.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput-side cable retention\u003c\/strong\u003e — The bracket holds all four HDMI output cables at the chassis so that cable weight and accidental pull do not unseat a connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits both QuadPlex input variants\u003c\/strong\u003e — One part number covers QPX DIN and QPX HIN processors, which keeps the accessory line simple across a mixed deployment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo power or configuration\u003c\/strong\u003e — It is a passive mechanical accessory, so it adds nothing to commissioning time and nothing to the maintenance burden.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects unattended installations\u003c\/strong\u003e — Ceiling, wall and behind-display mounting positions are where a dropped HDMI link is most expensive to diagnose, and this bracket removes the most common cause.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor-supplied hardware\u003c\/strong\u003e — Ordering the RGB Spectrum bracket avoids the fit and clearance problems that come with third-party cable clamps on a compact chassis.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number\u003c\/strong\u003e — QPX BRK-4H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem type\u003c\/strong\u003e — Cable retention bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors retained\u003c\/strong\u003e — HDMI outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e — QPX DIN and QPX HIN units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e — Sold as a single bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSource\u003c\/strong\u003e — RGB Spectrum price list description\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-size:0.9em;color:#666;\"\u003eRGB Spectrum does not publish a datasheet for this part number. Contact Creation Networks for confirmed specifications before ordering.\u003c\/p\u003e","brand":"RGB Spectrum","offers":[{"title":"Default Title","offer_id":48299437392108,"sku":"QPX BRK-4H","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/RGB_2022_LOGO_STANDARD_FIN_d0440ae7-0eee-43ba-a99f-50f0f5821046.webp?v=1788378759","url":"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-brk-4h-cable-retention-bracket-hdmi-outputs-on-qpx-din-and-hin","provider":"Creation Networks","version":"1.0","type":"link"}