{"product_id":"rgb-spectrum-920-12399-multi-mode-fiber-optic-transceiver-for-xtendpoint","title":"RGB Spectrum 920 12399 – Multi-Mode Fiber Transceiver for XtendPoint","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe 920 12399 is a multi-mode fiber optic transceiver supplied by RGB Spectrum for XtendPoint KVM-over-IP appliances. RGB Spectrum specifies the network interface on those appliances as one RJ-45 gigabit port plus one SFP cage that supports a multi-mode or single-mode transceiver, and this part is the multi-mode option. Multi-mode is the usual choice inside a building or across a single facility, where the existing fiber plant is OM3 or OM4 and the reach required is a few hundred metres rather than kilometres. The optic plugs into the cage with no configuration on the appliance.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eAn XtendPoint deployment separates the operator from the computer: the transmitter sits with the host system in a secure equipment room, the receiver sits at the operator desk, and the two communicate over an IP network. Copper structured cable handles that link on short runs. Where the distance, the building layout or the interference environment makes copper unsuitable, the fiber option is used instead, and the 920 12399 is the transceiver that makes an XtendPoint appliance terminate multi-mode fiber directly rather than through an external media converter.\u003c\/p\u003e\u003cp\u003eTransceivers are ordered per terminated port, so a point-to-point fiber link between one transmitter and one receiver normally takes two of this part, and a switched deployment takes one per appliance plus one per switch port. Where the route is single-mode fiber, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-920-12400-single-mode-fiber-optic-transceiver-for-xtendpoint\"\u003e920 12400\u003c\/a\u003e is the correct part instead — the two fiber types are not interchangeable. The XtendPoint transmitters and receivers themselves, in two-signal and four-signal versions, are live RGB Spectrum products with an SFP cage on each unit; receiver positions can be aggregated for keyboard and mouse sharing with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-xp-link-xtendpoint-km-aggregator-for-up-to-4-xp-receivers\"\u003eXP LINK\u003c\/a\u003e, racked with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-xp-rak-rackmount-tray-1ru-for-up-to-2-horizontal-units\"\u003eXP RAK\u003c\/a\u003e tray, and paired with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-cm-43-xtendpoint-43-curved-monitor\"\u003eCM 43\u003c\/a\u003e curved monitor at the operator position.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the fiber grade and connector type on the installed route, the measured link distance, and the loss budget across patch panels and splices. A multi-mode optic will not work over single-mode fiber, and mixing the two is one of the more common commissioning faults on a fiber KVM link. RGB Spectrum publishes no wavelength, reach or optical budget figures for this part number, so have those confirmed before the fiber is terminated and the appliances are deployed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the XtendPoint SFP cage\u003c\/strong\u003e — RGB Spectrum lists the appliance SFP cage as supporting a multi-mode or single-mode transceiver, and this is the vendor multi-mode option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuited to in-building fiber plant\u003c\/strong\u003e — Multi-mode is the fiber type most commonly already installed within a facility, so the link often uses existing infrastructure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo external media converter\u003c\/strong\u003e — The optic lets the appliance terminate fiber directly, which removes a separate converter and its power supply from each end of the link.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo appliance configuration\u003c\/strong\u003e — Installation is a plug-in operation; the KVM-over-IP network configuration is unchanged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple per-port quantities\u003c\/strong\u003e — One transceiver per terminated port makes bill-of-materials planning straightforward on multi-position deployments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor-supplied optic\u003c\/strong\u003e — Using the RGB Spectrum part avoids the optic-coding and compatibility issues that can arise with third-party modules in a vendor cage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number\u003c\/strong\u003e — 920 12399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem type\u003c\/strong\u003e — Fiber optic transceiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber type\u003c\/strong\u003e — Multi-mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended host\u003c\/strong\u003e — XtendPoint appliances\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost port\u003c\/strong\u003e — SFP cage on XtendPoint transmitters and receivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e — Ordered per port; a point-to-point fiber link needs one at each end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSource\u003c\/strong\u003e — RGB Spectrum price list description and the XtendPoint network specification\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-size:0.9em;color:#666;\"\u003eRGB Spectrum does not publish a datasheet for this part number. Contact Creation Networks for confirmed specifications before ordering.\u003c\/p\u003e","brand":"RGB Spectrum","offers":[{"title":"Default Title","offer_id":48299439423724,"sku":"920 12399","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/RGB_2022_LOGO_STANDARD_FIN_8db6b892-699e-4b31-9b9b-8b52f9e4d926.webp?v=1788378760","url":"https:\/\/creationnetworks.net\/products\/rgb-spectrum-920-12399-multi-mode-fiber-optic-transceiver-for-xtendpoint","provider":"Creation Networks","version":"1.0","type":"link"}