{"product_id":"rgb-spectrum-920-12325-mounting-brackets-with-vesa-mount-for-qpx-din-and-qpx-hin","title":"RGB Spectrum 920 12325 – QuadPlex VESA Mounting Bracket Kit","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe 920 12325 is the QuadPlex VESA mounting bracket kit for QPX DIN and QPX HIN multi-display processors. It gives the installer a defined way to fix the processor to a wall, to structure, or to the VESA hole pattern on the back of a display, instead of leaving a small chassis loose on a shelf or cable-tied to a stud. That matters in digital signage and video wall work, where the processor usually needs to live within a short HDMI run of the displays it drives. The brackets are mechanical hardware only, with no electrical connection to the unit.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eQuadPlex processors are compact and light, which makes them easy to place close to the displays but also easy to mount badly. The 920 12325 brackets attach to the chassis and present a universal VESA mounting interface, so the unit can be bolted to the display's own rear pattern, to a VESA-compatible wall plate, or to a mount adapter already in the design. Fixing the processor behind the display keeps the four HDMI output runs short, keeps the head-end out of public reach, and removes the loose-chassis problem that turns into an intermittent fault six months after handover.\u003c\/p\u003e\u003cp\u003eThe kit is specified for the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-din-quadplex-processor-1-displayport-1-2-input-4-hdmi-outputs\"\u003eQPX DIN\u003c\/a\u003e and the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-hin-quadplex-processor-1-hdmi-2-0-input-4-hdmi-outputs\"\u003eQPX HIN\u003c\/a\u003e processors. Where the deployment is a rack-based head-end rather than a behind-display mount, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-rak-rackmount-tray-3-horizontal-1ru-or-10-vertical-3ru-quadplex-units\"\u003eQPX RAK\u003c\/a\u003e rackmount tray is the correct accessory instead. On a mounted unit, connector retention becomes more important than on a shelf unit, so the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-brk-4h-cable-retention-bracket-hdmi-outputs-on-qpx-din-and-hin\"\u003eQPX BRK-4H\u003c\/a\u003e output bracket and, on an HDMI-fed processor, the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rgb-spectrum-qpx-brk-1h-cable-retention-bracket-hdmi-input-on-qpx-hin\"\u003eQPX BRK-1H\u003c\/a\u003e input bracket are usually ordered at the same time.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the VESA hole pattern and screw depth available on the target display or wall plate, the clearance behind the display once the processor and its cabling are in place, and whether the mount position leaves the network port and power inlet reachable for service. RGB Spectrum does not publish a dimensioned drawing or a supported VESA pattern list for this part number, so on a tight behind-display cavity those measurements should be confirmed before the hardware is committed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal VESA mounting interface\u003c\/strong\u003e — The brackets let a QuadPlex processor bolt to a display's rear VESA pattern or to a VESA-compatible wall plate rather than sitting loose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers both QuadPlex models\u003c\/strong\u003e — One part number serves the DisplayPort-input QPX DIN and the HDMI-input QPX HIN, which simplifies procurement on mixed sites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps output runs short\u003c\/strong\u003e — Mounting the processor at the display keeps the four HDMI output cables short, which reduces cable cost and 4K signal risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecures the head-end out of reach\u003c\/strong\u003e — A fixed processor behind a display or on a high wall position is far less exposed in public and commercial spaces than a shelf-mounted unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical hardware only\u003c\/strong\u003e — There is nothing to power or configure, so the kit adds no commissioning time and no ongoing maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number\u003c\/strong\u003e — 920 12325\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem type\u003c\/strong\u003e — Mounting brackets with universal VESA mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits\u003c\/strong\u003e — QPX DIN and QPX HIN units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting interface\u003c\/strong\u003e — Universal VESA mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e — Supplied as a bracket set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSource\u003c\/strong\u003e — RGB Spectrum price list description\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-size:0.9em;color:#666;\"\u003eRGB Spectrum does not publish a datasheet for this part number. Contact Creation Networks for confirmed specifications before ordering.\u003c\/p\u003e","brand":"RGB Spectrum","offers":[{"title":"Default Title","offer_id":48299439227116,"sku":"920 12325","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/RGB_2022_LOGO_STANDARD_FIN_3d2b4e53-50f4-48c0-b336-29da720600a6.webp?v=1788378760","url":"https:\/\/creationnetworks.net\/products\/rgb-spectrum-920-12325-mounting-brackets-with-vesa-mount-for-qpx-din-and-qpx-hin","provider":"Creation Networks","version":"1.0","type":"link"}