{"product_id":"replacement-module-16","title":"Sound Control Technologies RC8-CE – RemoteCam8 Camera-End Replacement Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Sound Control Technologies RC8-CE is the camera-end replacement module for the RemoteCam8 extension system used with the Cisco Quad Camera. The RemoteCam8 platform carries camera power, dual HDMI video, Ethernet control, and dual-channel audio over a single CAT6 STP cable from 10m to 100m. This replacement module allows AV integrators and facilities managers to bring a failed RemoteCam8 installation back online by replacing only the camera-side module, leaving the head-end module and installed cabling untouched.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eIn a RemoteCam8 system, the RC8-CE camera-end module mounts at the Cisco Quad Camera position — typically integrated into an RC-CUBBY on-wall mount — and links to the RC8-HE head-end module at the codec rack over the SCTLink CAT6 STP cable. The camera end accepts two independent HDMI inputs from the Quad Camera, provides a single 10\/100 Ethernet port for camera control, offers 3.5mm TRS stereo audio in\/out, and delivers camera power through its 4 Pin-DIN power output so no factory camera power supply is required. When a camera-end failure is diagnosed, replacing only the RC8-CE restores full system operation; the existing RC8-HE, WPS-48 power supply, and cabling stay in place. The module is a like-for-like replacement built to the original RemoteCam8 specification and pairs directly with the installed head-end module, maintaining firmware update pass-through from the codec to the camera.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoteCam8-Specific Replacement\u003c\/strong\u003e — Drop-in camera-end module for RemoteCam8 Cisco Quad Camera extension systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-Replaceable\u003c\/strong\u003e — Restores a failed system without replacing the head-end module, power supply, or installed CAT6 cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual HDMI Inputs\u003c\/strong\u003e — Accepts two independent HDMI inputs from the Cisco Quad Camera at up to 1920x1080p60 with HDCP support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Power Output\u003c\/strong\u003e — 4 Pin-DIN power output powers the Quad Camera over the link with no factory PSU required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet Camera Control\u003c\/strong\u003e — Single 10\/100 port carries Ethernet PTZ control to the camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo Audio I\/O\u003c\/strong\u003e — 3.5mm TRS jacks provide stereo line-level audio in and out at the camera position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Integration\u003c\/strong\u003e — Designed to integrate with RC-CUBBY series on-wall mounts for a clean camera installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ SKU\u003c\/td\u003e\n\u003ctd\u003eRC8-CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eCamera-End Replacement Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible System\u003c\/td\u003e\n\u003ctd\u003eRemoteCam8 (Cisco Quad Camera with SX80, Codec Plus, Codec Pro)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Inputs\u003c\/td\u003e\n\u003ctd\u003eTwo independent HDMI inputs, up to 1920x1080p@60Hz, HDCP support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003eSingle 10\/100 port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003e3.5mm TRS jacks, stereo line level unbalanced, in\/out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Out\u003c\/td\u003e\n\u003ctd\u003e4 Pin-DIN to camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLink Cable\u003c\/td\u003e\n\u003ctd\u003eCAT6 STP (SCTLink), 10m–100m, T568A\/T568B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eH 1.6\" x W 7.35\" x D 4.35\" (40 x 186 x 110 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.9 lbs \/ 408 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-Year Standard Advance Replacement (2-Year extension available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs the RC8-CE compatible with RemoteCam7 or RemoteCam6 systems?\u003c\/h3\u003e\u003cp\u003eNo. The RC8-CE is the camera-end replacement specifically for RemoteCam8 systems. Other RemoteCam platforms require their own CE modules; they are not interchangeable.\u003c\/p\u003e\u003ch3\u003eHow do I know whether I need the RC8-CE or the RC8-HE?\u003c\/h3\u003e\u003cp\u003eThe RC8-CE is the camera-side module at the Cisco Quad Camera; the RC8-HE is the rack-side module at the codec. If the fault is at the rack, you need the RC8-HE. Contact Creation Networks for diagnostic support.\u003c\/p\u003e\u003ch3\u003eWill the RC8-CE pair with my existing RC8-HE?\u003c\/h3\u003e\u003cp\u003eYes. The RC8-CE is a like-for-like replacement that pairs directly with the installed RC8-HE head-end module over your existing CAT6 STP SCTLink cable.\u003c\/p\u003e\u003ch3\u003eDoes the RC8-CE power the Cisco Quad Camera?\u003c\/h3\u003e\u003cp\u003eYes. Power is delivered over the SCTLink from the head end, and the RC8-CE feeds the camera through its 4 Pin-DIN power output, so no factory camera power supply is needed at the camera position.\u003c\/p\u003e\u003ch3\u003eWhat warranty applies to this replacement module?\u003c\/h3\u003e\u003cp\u003eSound Control Technologies provides a 3-year standard advance replacement limited warranty. Contact Creation Networks for current warranty terms.\u003c\/p\u003e","brand":"Sound Control Technologies","offers":[{"title":"Default Title","offer_id":47700716290284,"sku":"RC8-CE","price":1925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/sct_product_rc8_gen2_3af125fa-3be0-46e3-a340-d0374179d661.gif?v=1780593697","url":"https:\/\/creationnetworks.net\/products\/replacement-module-16","provider":"Creation Networks","version":"1.0","type":"link"}