{"product_id":"rdl-hd-ra35u","title":"RDL HD-RA35U – 35 W Remote Mixer Amplifier, 4\/8 Ohm","description":"\u003ch2\u003eWhat is the RDL HD-RA35U?\u003c\/h2\u003e\u003cp\u003eThe RDL HD-RA35U is a four-input 35 W mixer amplifier whose music source levels are adjusted from an RDL wall-mounted remote control. A paging source on Input 1 keeps its own front-panel level, while inputs 2, 3 and 4 are VCA controlled from the remote. It drives 4 Ω or 8 Ω speakers and adds a second 4 W zone plus a music-on-hold output. It suits meeting rooms, offices and retail areas where users adjust the mix from the wall without running audio to the control location.\u003c\/p\u003e\u003ch2\u003eHow does it work?\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/rdlnet.com\/wp-content\/uploads\/2024\/01\/hd-ra35u.jpg\" alt=\"RDL HD-RA35U 35 watt remote mixer amplifier\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003c\/p\u003e\u003cp\u003eThe Zone 1 mixer is split between the front panel, which holds the paging level and bass and treble controls, and a remote control that adjusts inputs 2, 3 and 4. Remote controls such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-d-rc3\"\u003eRDL D-RC3\u003c\/a\u003e or \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-ds-rc3\"\u003eRDL DS-RC3\u003c\/a\u003e connect through the RJ45 VCA port, so no audio wiring runs to the wall location. The Zone 1 output drives 4 Ω or 8 Ω loudspeakers, selected by a rear-panel switch, at 35 W RMS into 4 Ω or 32 W into 8 Ω. The Zone 2 mixer on the rear panel uses installer-set trimmers. Inputs 1 and 2 are switch-selectable for mic or line level with switchable 24 V phantom, and Input 1 has a transformer-isolated line input with push-to-talk terminals and an adjustable VOX circuit. Paging on Input 1 can duck inputs 2, 3 and\/or 4 by 25 dB, with a rear-panel trimmer that delays the fade-up from 2 to 6 seconds. Inputs 3 and 4 accept unbalanced mono or stereo line sources on RCA jacks. Zone 2 adds a 4 W amplifier for an 8 Ω speaker, a 600 Ω transformer-balanced music-on-hold output and a balanced line output that can feed another amplifier. The mixer and amplifiers enter standby sleep mode when audio is absent and draw less than 1 W, waking about 2 seconds after audio returns. The HD-RA35U is engineered, tested and manufactured in the U.S.A. and includes its power supply.\u003c\/p\u003e\u003ch2\u003eWhat are the key features?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo amplifier zones\u003c\/strong\u003e — Zone 1 delivers 35 W into 4 Ω (32 W into 8 Ω) and Zone 2 delivers 4 W into 8 Ω for a second area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaging priority ducking\u003c\/strong\u003e — Automatic VOX or contact-closure paging on Input 1 ducks other inputs by 25 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMusic-on-hold output\u003c\/strong\u003e — A 600 Ω transformer-isolated output feeds telephone systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass and treble controls\u003c\/strong\u003e — Front-panel tone controls with center detent shape the Zone 1 sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy-saving sleep mode\u003c\/strong\u003e — Standby consumption is below 1 W including the supplied power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote-controlled mix\u003c\/strong\u003e — Inputs 2, 3 and 4 are VCA controlled from an RDL remote control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere is it typically used?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable style=\"border-collapse:collapse;width:100%;min-width:300px;table-layout:fixed\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:40%\"\u003e\n\u003ccol style=\"width:60%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eHD-RA35U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eAmplifier Zones (2)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eZone 1 (Main): 35 W RMS, remote-controlled mixer (3 user controls) with paging input level control on front panel; Zone 2: 4 W RMS (8 Ohms), rear-panel mixer (trimmers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eAudio Inputs (5)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e2, balanced, mic or line switch selectable on terminal blocks; 2, unbalanced stereo summing inputs on RCA jacks; 1, unbalanced amp in on RCA jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eGain Adjustments (2)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eInputs 1 and 2: Rear-panel single-turn trimmer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eMaximum Input Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eMic Inputs: -9 dBu; Balanced line inputs: + 20 dBu; Unbalanced Inputs: + 5 dBV (+11 dBV, one input); (for 1% THD+N at output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003ePhantom Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e24 Vdc (IEC 61938: 2013), switch-selectable for each mic input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eDucking\/Muting Actuation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eAutomatic (Input 1 VOX: rear-panel adjustable signal threshold with LED indicator) or Manual (contact closure to ground)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eDucking\/Muting Release Delay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eRear-panel single-turn trimmer, adjustable 2 to 6 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eDucking\/Muting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eSwitch-selectable for inputs 2, 3 and\/or 4, 25 dB ducking attenuation, nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eEffects Loop\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eUnbalanced RCA jacks (preamp output from main mixer, input to power amplifier)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eExternal RDL Module Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e24 Vdc, 100 mA maximum, ground-referenced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eNoise (line or amplified outputs)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eMic or Balanced line inputs: -70 dB (below compressor threshold at max gain); Unbalanced Inputs: \u0026lt;-75 dB (max gain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u0026lt; 0.5% (1 kHz at compressor threshold, main amp output); \u0026lt; 0.1% (line output, main)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eCMRR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eMic inputs: \u0026gt; 50 dB (50 Hz to 120 Hz); Balanced line inputs: \u0026gt; 80 dB (50 Hz to 120 Hz, transformer-coupled input)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eCompressor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eThreshold 2 dB below rated output, automatically adjusting attack and release times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eFrequency Response (mixer)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eMic to line output: ±1.5 dB (40 Hz to 25 kHz); Balanced line input to line output: ±1 dB (20 Hz to 20 kHz); Unbalanced line input to line output: ± 0.5 dB (20 Hz to 20 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eFrequency Response (amplifiers)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e±1 dB (50 Hz to 20 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eTone Controls\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front-panel) with center detent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eAudio Outputs (2)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e-10 dBV nominal (316 mV), dual mono unbalanced RCA (main mixer; FLAT or EQUALIZED, switch-selectable on rear panel); 0 dBu nominal balanced, terminal block (zone 2 mixer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eMOH Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e0 dBu nominal (775 mV), 600 Ohm transformer-isolated, 16 dB headroom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003ePower Amplifier Outputs (2)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eZone 1 (main, \u0026lt;1% THD+N): 35 W RMS (4 Ohms), 32 W (8 Ohms) on detachable terminal block (switch-selectable 4 or 8 Ohm impedance); Zone 2: 4 W (8 Ohms, on detachable terminal block)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eIndicators (9)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eFront-panel: Signal present (4; 1 per input, green), Compressor activity (red), Power (bright=on, dim=standby, blue); Rear-panel: dual-LED VU meter (for inputs 1 and 2, green\/red), Ducking\/muting threshold (yellow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eVCA (3)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eZone 1 (main) inputs 2, 3 and 4, 0 to 10 Vdc control, RJ45 (compatible with RDL VCA wall controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eFront-panel controls (4)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eZone 1 (main) paging level control (input 1), EQ (2, bass and treble), Power (momentary pushbutton, toggle on\/standby)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eEfficiency Standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e“Energy Star® Program Requirements for Audio\/Video” Version 2.0, applicable for passive remote control models (without muting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eSleep Mode Power Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e\u0026lt; 1 W (amplifier and included power supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eSleep Mode Delay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e10 minutes to 2 hours (switch-selectable in 10 minute increments)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eSleep Mode Disable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eSelectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eActive Mode Delay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e2 seconds (nominal) after input audio detected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eAudio Detector Threshold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e-80 dBu mic (at max input gain), -55 dBu balanced line (at max input gain), -42 dBV unbalanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eAmbient Operating Environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e32°F (0°C) to 122°F (50°C) Maximum; 68°F (20°C) Recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003ePower Supply (included)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003e100 to 240 Vac, 50-60 Hz, 50 W; 24 Vdc output to amplifier chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px;vertical-align:top\"\u003e\u003cstrong\u003eDimensions and Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:6px\"\u003eHeight: 3.5 in.(8.89 cm); Width: 8.5 in.(21.6 cm); Depth: 10 in.(25.4 cm); Weight: 5.6 lb.(2.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhich remote controls work with the HD-RA35U?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eRDL lists the D-RC3, D-RC3M, DS-RC3 and DS-RC3M remote controls.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhich inputs are remote controlled?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eInputs 2, 3 and 4 are VCA controlled from the remote. Input 1, normally the paging source, has its own front-panel level control.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhich loudspeakers can it drive?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eZone 1 drives 4 Ω or 8 Ω speakers, switch-selectable on the rear panel. Zone 2 drives an 8 Ω speaker and\/or 600 Ω telephone equipment.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs the power supply included?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. The included supply accepts 100 to 240 Vac, 50-60 Hz. RDL lists the PS-24V3A (USA) and PS-24V3 (International).\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow much power does it use in standby?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eLess than 1 W including the included power supply.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow can it be mounted?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eRDL lists the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-hd-ra2\"\u003eHD-RA2\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-hd-hra1\"\u003eHD-HRA1\u003c\/a\u003e rack adapters, \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-hd-wm1\"\u003eHD-WM1\u003c\/a\u003e wall mount, \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-hd-asc1\"\u003eHD-ASC1\u003c\/a\u003e, \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-hd-bp1\"\u003eHD-BP1\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-hd-fp1\"\u003eHD-FP1\u003c\/a\u003e as HD Series mounting accessories.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat warranty does the HD-RA35U carry?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThis product is covered by a 7-year RDL warranty. For warranty claims, RMAs or support, contact Creation Networks at (888) 230-3661 or sales@creationnetworks.net.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan Creation Networks help integrate the HD-RA35U?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. Creation Networks supports system design, equipment selection and installation planning for RDL products nationwide. Call (888) 230-3661 for a quote or technical help.\u003c\/p\u003e\u003c\/details\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":68025745506540,"sku":"HD-RA35U","price":490.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/hd-ra35u.jpg?v=1793583134","url":"https:\/\/creationnetworks.net\/products\/rdl-hd-ra35u","provider":"Creation Networks","version":"1.0","type":"link"}