{"product_id":"rdl-dds-rn31","title":"RDL DDS-RN31 – Stainless 4x4 Software-Controlled Dante Wall Interface","description":"\u003ch2\u003eWhat is the RDL DDS-RN31?\u003c\/h2\u003e\u003cp\u003eThe RDL DDS-RN31 is a software-configured 4 x 4 Dante mic\/line wall interface in a stainless steel Decora-style finish. It provides two XLR mic\/line inputs, left and right RCA inputs and a stereo mini-jack input on the front, along with a front-panel stereo mini-jack output and two balanced line outputs on a rear-panel terminal block. Gain, phantom power and output levels are set over the network with RDL CONSOLE or other network control software, and a Q-SYS plug-in is available for configuration inside a Q-SYS design. It runs on PoE and suits conference rooms, classrooms and meeting spaces where settings need to be adjusted remotely instead of at the wall.\u003c\/p\u003e\u003ch2\u003eHow does it work?\u003c\/h2\u003e\u003cp\u003e\u003cimg src=\"https:\/\/rdlnet.com\/wp-content\/uploads\/2023\/10\/dds-rn31-1.jpg\" alt=\"RDL DDS-RN31 stainless steel 4 x 4 software-controlled Dante wall interface\" style=\"max-width:100%;height:auto\" loading=\"lazy\"\u003e\u003c\/p\u003e\u003cp\u003eThe DDS-RN31 installs in a standard North American dual-gang electrical box (4\" square deep recommended) or an RDL WB-2U international wall box for thinner walls. Each XLR input becomes its own Dante transmit channel, with software-selectable mic gain of 35 dB, 42 dB or 59 dB and line gain of unity or 12 dB. P48 phantom power can be enabled in software when an input is set to mic level, so condenser microphones can be added without opening the wall plate. The mini-jack and RCA left and right inputs provide -18 dBFS on the network for a -10 dBV source, and software lets each input feed either or both of two Dante channels, with multiple sources summed. Two Dante channels drive the front-panel mini-jack output at -10 dBV unbalanced, and two more feed the rear-panel terminal block at +4 dBu balanced, each with a software-controlled attenuator in 1 dB steps. The rear-panel outputs can be wired to RDL AMS connector modules in a matching Decora plate for additional jack options. Green front-panel LEDs confirm PoE power and Dante sync. RDL mic preamplifiers and 24-bit conversion in a steel chassis with Decora front plates deliver low-noise performance for continuous duty, and the unit is built in the U.S.A. For a finished stainless steel install, use the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-cp-2s\"\u003eRDL CP-2S double cover plate\u003c\/a\u003e, or the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-cp-3s\"\u003eRDL CP-3S triple cover plate\u003c\/a\u003e when an AMS output plate shares the box. AMS connector modules such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-ams-xlm\"\u003eAMS-XLM XLR male jack\u003c\/a\u003e, \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-ams-xlrma\"\u003eAMS-XLRMA mic\/line XLR output\u003c\/a\u003e and \u003ca href=\"https:\/\/creationnetworks.net\/products\/rdl-ams-1-8f\"\u003eAMS-1\/8F stereo mini-jack\u003c\/a\u003e complete the output connections.\u003c\/p\u003e\u003ch2\u003eWhat are the key features?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 4 Dante I\/O\u003c\/strong\u003e — Combines mic, line and output connections in a single PoE-powered wall plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork configuration\u003c\/strong\u003e — Gain, phantom and output level are set with RDL CONSOLE or other network control software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ-SYS plug-in\u003c\/strong\u003e — A Q-SYS plug-in is available for configuring the interface inside a Q-SYS environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware-selectable gain\u003c\/strong\u003e — Mic gain of 35, 42 or 59 dB and line gain of unity or 12 dB are chosen remotely per input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote P48 phantom\u003c\/strong\u003e — Phantom power is enabled in software on any input set to mic level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA and mini-jack sources\u003c\/strong\u003e — Front-panel RCA and mini-jack inputs can each feed one or two Dante channels for laptops and playback devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 dB output attenuators\u003c\/strong\u003e — Each balanced output has a software-controlled attenuator in 1 dB steps for precise level matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-bit Dante audio\u003c\/strong\u003e — Supports 44.1 kHz or 48 kHz at 24 bits with a 20 Hz to 20 kHz (±0.5 dB) response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE powered\u003c\/strong\u003e — Runs on PoE Class 0 (IEEE 802.3af) with no local supply at the wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecora wall mounting\u003c\/strong\u003e — Fits a dual-gang box or RDL WB-2U wall box with a stainless steel Decora-style front plate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere is it typically used?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eHuddle room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch\"\u003e\u003ctable border=\"1\" cellpadding=\"6\" style=\"border-collapse:collapse;border-color:#ddd;width:100%;min-width:300px;table-layout:fixed\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:44%\"\u003e\n\u003ccol style=\"width:56%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDDS-RN31 (stainless steel finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eNetwork Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRJ45 with Link and Speed indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eDigital Audio Ethernet Protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eTransmission Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eSample Rates Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e44.1 kHz, 48 kHz (default)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eBit Depth Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eAudio Operating Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-18 dBFS = +4 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eReference Level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 dBFS = +22 dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\" style=\"background:#f5f5f5\"\u003e\u003cstrong\u003eInputs (2): XLR (female)\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eGain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMic: 35 dB (LOW), 42 dB (MED), 59 dB (HIGH); Line: Unity (NORM), 12 dB (HIGH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eInput Level (for +4 dBu\/-18 dBFS)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMic: -31 dBu (LOW), -38 dBu (MED), -55 dBu (HIGH); Line: +4 dBu (LOW), -8 dBu (HIGH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eInput Level (maximum)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMic: -14 dBu (LOW), -21 dBu (MED), -38 dBu (HI); Line: +23 dBu (LOW), +10 dBu (HIGH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 1.2 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eP48, 48 Vdc, software-selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eStandard for Phantom\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIEC 61938: 2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eSelectors per input (2)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhantom, Gain, software-selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (± 0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -128 dBu (59 dB gain); \u0026lt; -130 dBu A-Weighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eNoise below -18 dBFS (20 to 20 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMic: \u0026lt; -88 dB (LOW), \u0026lt; -82 dB (MED), \u0026lt; -68 dB (HIGH); Line: \u0026lt; -88 dB (NORM), \u0026lt; -88 dB (HIGH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.1% (20 Hz to 20 kHz, +4 dBu\/-18 dBFS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eCMRR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 65 dB (50 Hz to 120 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBelow Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\" style=\"background:#f5f5f5\"\u003e\u003cstrong\u003eInputs (4): Mini-jack Stereo (2, L and R); RCA jacks (2, L and R)\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eInput Level (for +4 dBu\/-18 dBFS)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10 dBV nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eInput Level (maximum)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+8 dBV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 50 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eSelectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStereo (L and R)\/Mono (summed), software-selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (± 0.2 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eNoise below -18 dBFS (20 to 20 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -85 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -85 dB (1 kHz); \u0026lt; -65 dB (L into R, R into L, 20 Hz to 20 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05% (20 Hz to 20 kHz, +4 dBu\/-18 dBFS); 0.01% at 1 kHz (typ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\" style=\"background:#f5f5f5\"\u003e\u003cstrong\u003eOutputs (4): Balanced, detachable terminal block (2); Unbalanced, Mini-jack (2, L and R)\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eOutput Level (operating)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+4 dBu (nominal) balanced, software adjustable in 1 dB steps; -10 dBV (nominal) unbalanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eOutput Level (maximum)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+22 dBu balanced; +8 dBV unbalanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 Ω balanced, 100 Ω unbalanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (± 0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eNoise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -88 dB (bal., below +4 dBu); \u0026lt; -106 (bal., below +22 dBu); \u0026lt; -90 dB (unbal., below -10 dBV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -70 dB (bal., 20 Hz to 20 kHz); \u0026lt; -80 dB (unbal., 20 Hz to 20 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eIndicators (4)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEthernet Link and Speed (2, rear panel); Sync and Power (2, front panel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eAmbient Operating Environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32° F to 104° F (0° C to 40° C); 86° F (30° C) maximum recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePoE Class 0, IEEE 802.3af\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eSpecification Conditions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGain\/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.52\" (8.94 cm) W; 4.11\" (10.44 cm) H; 2.09\" (5.31 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow is it configured?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe DDS-RN31 is configured over the network with RDL CONSOLE or other network control software. There are no front-panel gain switches.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes it work with Q-SYS?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. RDL lists a Q-SYS plug-in for configuring the interface within a Q-SYS environment.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eIt is powered by PoE Class 0 (IEEE 802.3af) from a PoE switch or injector.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat back box does it need?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eA North American dual-gang electrical box (4\" square deep recommended) or an RDL WB-2U international wall box, mounted at 6.5 ft (2 m) or lower.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat audio levels does it use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe network operating level is -18 dBFS, aligned to +4 dBu analog, with 0 dBFS equal to +22 dBu and 24-bit audio at 44.1 kHz or 48 kHz.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat warranty does it carry?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThis product is covered by a 7-year RDL warranty. For warranty claims, RMAs or support, contact Creation Networks at (888) 230-3661 or sales@creationnetworks.net.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan Creation Networks help design the system?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. Our team specifies, programs and installs networked Dante audio systems for commercial projects nationwide. Call (888) 230-3661 for a quote or design review.\u003c\/p\u003e\u003c\/details\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":68025748816108,"sku":"DDS-RN31","price":905.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/dds-rn31-1.jpg?v=1793583273","url":"https:\/\/creationnetworks.net\/products\/rdl-dds-rn31","provider":"Creation Networks","version":"1.0","type":"link"}