Panasonic PT-FRZ60WU7 6,000 Lumens 1 DLP Laser Projector

Spec Sheet

With improved contrast, 6,000 lumens of vibrant color, and a host of available audio and video inputs, Panasonic's PTFRZ60 is an obvious choice for your 1-Chip DLP installation.

A new Dynamic Contrast 2 setting, which uses digitally controlled scene-linking to directly modulate laser output, delivers the PTFRZ's enhanced contrast accuracy. A unique Quartet Color Harmonizer and Rich Color Enhancer optimize image quality to accommodate different picture modes.

With a 27 dB*3 quiet mode, operating noise is suppressed to inaudible levels so all you get from the PTFRZ60 are stunning images.

Need flexibility for your installation? A 2.0x optical zoom and Panasonic DIGITAL Link provide it. 4K signal input*5 via CEC-compatible HDMI® coupled DIGITAL LINK smooth integration with existing 4K infrastructure making the PTFRZ60 ideal for retrofit or new installs. There's even a separate LAN terminal, and a 5 V/2 A USB outlet to support wireless projection.

The PT-FRZ60 Series features a high-efficiency filterless cooling system, hermetically sealed DMD block, and dust-resistant shielded laser drive to assure 20,000 hours*6 of stable maintenance-free projection. A linear brightness ramp and strong color retention preserve image quality for longer.

*3 FRZ50/FRZ55 only (TBD). FRZ60 operates at 30 dB in Quiet Mode (TBD).

*5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.

*6 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, NORMAL Mode, Dynamic Contrast 2, temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until brightness decreases to 50 % will vary depending on environment and usage conditions. Parts other than the light source may require replacement before 20,000 hours, and checkup is recommended around this time.

Features:

• 6,000 Lumens
• 4K signal input with Digital Link conversion to WUXGA
• HDMI Input
• D-sub computer I/O
• Composite video input
• Audio I/O
• USB Type A output
• LAN terminal

• Projector type: 1-Chip DLP™ projector
• DLP™ chip
• Panel size: 17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
• Display method: DLP™ chip x 1, DLP™ projection system
• Number of pixels: 2,304,000 (1920 x 1200 pixels)
• Light source: Laser diodes
• Light output: 6,000 lm*1/6,200 lm (Center)*2
• Time until light output declines to 50 %*3: 20,000 hours (NORMAL)
• Resolution: 1920 x 1200 pixels
• Contrast ratio*1: 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON)
• Screen size (diagonal): 1.02–7.62 m (40–300 in), 16:10 aspect ratio
• Center-to-corner zone ratio*1: 90 %
• Lens: 2.0x manual zoom (throw ratio: 1.46–2.94:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm
• Lens shift (From the origin point of the lens mounter)
• Vertical: +64 %, -44 % (manual)
• Horizontal: +34 %, -27 % (manual)
• Keystone correction range: Vertical: ±40 °, Horizontal: ±20 °
• Installation: Ceiling/floor, front/rear, free 360-degree installation
• Terminals
  • HDMI IN: HDMI 19-pin x 2 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*4), CEC supported
  • COMPUTER 1 IN: D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC)
  • COMPUTER 2 IN/1 OUT: D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC)
  • VIDEO IN: Pin jack x 1 (composite video)
  • AUDIO IN 1: Pin jack x 2 (L, R)
  • AUDIO IN 2/3: M3 x 1/M3 x 1
  • AUDIO OUT: M3 x 1 (Variable)
  • SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
  • DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible, 4K/60p signal input*4
  • LAN: RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
  • USB: USB connector (Type A) x 1 (Output 5 V/2 A)
  • Power supply: AC 100–240 V, 50/60 Hz
• Power consumption: TBD
• Cabinet materials: Molded plastic
• Operation noise*1: 30 dB (Quiet Mode) (TBD), 35 dB (Normal Mode) (TBD)
• Dimensions (W x H x D): 498 x 168*5 x 492 mm (19 5/8˝ x 6 5/8˝*5 x 19 3/8˝ )
• Weight*6: Approx. 16.6 kg (35.9 lbs) (TBD)
• Operating environment: Operating temperature: 0–45 °C (32–113 °F), operating humidity: 10–80 % (no condensation)
• Applicable software: Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software