{"product_id":"extron-netpa-u-2004-fx-four-channel-configurable-output-amplifier-with-dante-and-dsp","title":"Extron NetPA U 2004 FX Four Channel Configurable Output Amplifier with Dante and DSP 200 Watts","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eExtron NetPA U 2004 FX\u003c\/strong\u003e is a four-channel, Dante-enabled power amplifier with software-configurable outputs that simultaneously drive 8 ohm, 4 ohm, 70V, or 100V loads in multi-zone systems. With integrated DSP and a built-in mix matrix, this networked amplifier handles essential signal processing for complex, decentralized commercial AV systems, while AES67 support ensures compatibility with other network audio devices. It is well suited to corporate campuses, education facilities, houses of worship, and hospitality venues that route audio over a Dante network and require flexible, zoned amplification.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/ne_60202801_der7101nrr_dv23.jpg?v=1775838934\" alt=\"Extron NetPA U 2004 FX four-channel Dante DSP configurable output amplifier front view\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the four channels can be independently configured for 8 ohm, 4 ohm, 70V, or 100V operation, so a single chassis can serve mixed speaker configurations such as dual zones of high-impedance ceiling speakers plus a low-impedance subwoofer. The total power of each adjacent channel pair is shared, allowing up to 400 watts to be allocated to a single channel where the system requires it. A built-in mix matrix routes any analog or Dante input to any amplifier output, Dante output, or analog line output, with DSP functions including gain, filters, dynamics, and delay. PoE on the LAN\/AT 1 port keeps DSP, Dante routing, and line I\/O operating even if mains power is lost.\u003c\/p\u003e\n\u003cp\u003eInstaWake returns the amplifier to full power from standby in under 50 milliseconds on signal detection, with minimal inrush current. The fan-cooled 1U enclosure does not require empty rack spaces for ventilation. For larger eight-channel projects without Dante, pair this unit with the \u003ca href=\"https:\/\/creationnetworks.net\/products\/extron-xpa-u-2008-fx-eight-channel-configurable-output-audio-power-amplifier-200-watts-per-channel\"\u003eXPA U 2008 FX\u003c\/a\u003e, or explore matched processors and amplifiers in the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/extron\"\u003eExtron collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour 200 W channels into 8 ohm, 4 ohm, 70V, or 100V\u003c\/strong\u003e — Built for large, high-powered, multi-zone integration projects with mixed speaker types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware-configurable output mode per channel\u003c\/strong\u003e — Each channel is independently set for 8 ohm, 4 ohm, 70V, or 100V operation, supporting unique configurations within one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible power allocation\u003c\/strong\u003e — Up to 400 total watts per channel pair can be balanced between adjacent channels to deliver power where it is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDante audio networking with AES67\u003c\/strong\u003e — 8x8 Dante routing with Dante Domain Manager and AES67 support for compatibility across enterprise network audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP with mix matrix\u003c\/strong\u003e — Routes any analog or Dante input to any output with gain, filtering, dynamics, and delay processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE-enabled DSP, routing, and configuration\u003c\/strong\u003e — DSP, Dante routing, and analog line I\/O continue operating on PoE if mains power is lost, and the unit can be configured on PoE alone before installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaWake recovery in under 50 milliseconds\u003c\/strong\u003e — Returns to full power from standby on signal detection so audio is not cut off, with minimal inrush current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEcofficient Level 2 design\u003c\/strong\u003e — Automatic standby conserves energy while maintaining DSP and external control functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog line inputs and post-DSP line outputs\u003c\/strong\u003e — Connect legacy analog sources and feed additional amplifiers while maintaining consistent processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurable dual LAN ports\u003c\/strong\u003e — Separate control and Dante traffic by port, or merge onto a single port for converged-network operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP and RS-232 control with digital I\/O\u003c\/strong\u003e — Integrates with control systems and responds to external triggers such as preset recall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtron Everlast power supply\u003c\/strong\u003e — Worldwide power compatibility backed by a 7-year parts and labor warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eAudio Output\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber \/ signal type\u003c\/td\u003e\n\u003ctd\u003e4 channels, 8 ohm, 4 ohm, 70V or 100V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier type\u003c\/td\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\u003ctd\u003e200 W per channel (all channels driven); up to 400 W per channel pair shared between adjacent channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e(4) 2-pole, 5 mm screw-lock captive screw connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz, ±1 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD + Noise\u003c\/td\u003e\n\u003ctd\u003e0.1% @ 1 kHz, 8 ohm, at 3 dB below clipping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise\u003c\/td\u003e\n\u003ctd\u003e100 dB, 20 Hz - 20 kHz, unweighted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eAudio Input\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber \/ signal type\u003c\/td\u003e\n\u003ctd\u003e4 balanced\/unbalanced analog plus Dante network audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connectors\u003c\/td\u003e\n\u003ctd\u003e(2) 5-pin 3.5 mm captive screw connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;10k ohms balanced\/unbalanced, DC coupled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal level\u003c\/td\u003e\n\u003ctd\u003e+4 dBu, balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum level\u003c\/td\u003e\n\u003ctd\u003e+20 dBu, balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eNetworking and Control\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio network\u003c\/td\u003e\n\u003ctd\u003eDante with Dante Domain Manager and AES67 support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLAN ports\u003c\/td\u003e\n\u003ctd\u003eDual, configurable separate or merged; PoE on LAN\/AT 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eIP and RS-232; 2 digital input and 2 digital output ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP\u003c\/td\u003e\n\u003ctd\u003eOnboard mix matrix with gain, filters, dynamics, and delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003cth colspan=\"2\"\u003eGeneral\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e100 VAC to 240 VAC, 50-60 Hz, internal Everlast supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy compliance\u003c\/td\u003e\n\u003ctd\u003eEcofficient Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFan, front-to-rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eClip limiting, thermal, short circuit, DC output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eMetal, 1U high, full rack wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct weight\u003c\/td\u003e\n\u003ctd\u003e10.1 lb. (4.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEverlast power supply warranty\u003c\/td\u003e\n\u003ctd\u003e7 years parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio network does the NetPA U 2004 FX use?\u003c\/strong\u003e\u003cbr\u003eIt uses Dante audio networking with Dante Domain Manager support and AES67 for compatibility with other network audio devices. Routing is configured with Dante Controller software, which assigns outputs from Dante-enabled devices such as an Extron DMP Plus processor to the amplifier inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan each channel drive a different speaker type?\u003c\/strong\u003e\u003cbr\u003eYes. Each of the four channels is independently configured in software for 8 ohm, 4 ohm, 70V, or 100V operation, so one amplifier can serve mixed configurations such as high-impedance ceiling zones plus a low-impedance subwoofer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it keep working if mains power fails?\u003c\/strong\u003e\u003cbr\u003eWhen PoE is applied to the LAN\/AT 1 port, the internal DSP, Dante routing, and analog line input and output signals continue to operate even if mains power is lost. The unit can also be configured on PoE alone before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it differ from the XPA U 2008 FX?\u003c\/strong\u003e\u003cbr\u003eThe NetPA U 2004 FX adds Dante networking and onboard DSP across four channels, while the \u003ca href=\"https:\/\/creationnetworks.net\/products\/extron-xpa-u-2008-fx-eight-channel-configurable-output-audio-power-amplifier-200-watts-per-channel\"\u003eXPA U 2008 FX\u003c\/a\u003e provides eight analog-input configurable channels for larger non-networked systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I integrate it with a control system?\u003c\/strong\u003e\u003cbr\u003eThe amplifier integrates over IP or RS-232 for control and status monitoring, and its two digital input and two digital output ports can respond to external triggers such as preset recall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty is included?\u003c\/strong\u003e\u003cbr\u003eThe amplifier carries a 3-year parts and labor warranty, and the internal Extron Everlast power supply is covered for 7 years parts and labor. Contact Creation Networks for design assistance across the \u003ca href=\"https:\/\/creationnetworks.net\/collections\/extron\"\u003eExtron lineup\u003c\/a\u003e.\u003c\/p\u003e","brand":"Extron","offers":[{"title":"Default Title","offer_id":47287831691500,"sku":"60-2028-01","price":3990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/ne_60202801_der7101nrr_dv23.jpg?v=1775838934","url":"https:\/\/creationnetworks.net\/products\/extron-netpa-u-2004-fx-four-channel-configurable-output-amplifier-with-dante-and-dsp","provider":"Creation Networks","version":"1.0","type":"link"}