{"product_id":"dynacord-ix30-8-us-8-channel-3kw-networked-dsp-amplifier","title":"Dynacord IX30:8-US – 8-Channel 3kW Networked DSP Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IX30:8 is an 8-channel networked DSP amplifier delivering 3 kW of total output power for multi-zone commercial AV installations that need high channel density in a single rack unit. Using powerTANK technology, this rack-mount amplifier drives both high-Z (70V\/100V) and low-Z loudspeaker loads across eight channels. With 8x8 Dante and OMNEO (Dante audio plus OCA\/AES70 control), the IX30:8 integrates directly into managed AV networks for centralized control of distributed audio. It suits integrators consolidating many zones onto one 96 kHz DSP amplifier platform.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IX30:8 fits a single rack unit and pairs eight amplifier channels with a fully featured 96 kHz DSP engine, consolidating routing, equalization, dynamics, and loudspeaker tuning inside one device. Its 16 x 16 matrix mixer, FIR-Drive speaker processing, and Dynacord FX let a system designer build complete signal chains for many zones without external processors. Eight mic\/line inputs accept local sources directly or act as Dante break-in points, while eight Dante inputs and eight Dante outputs carry networked audio across the install. The MXE-style TaskEngine handles system logic, scheduling, and automation for integration with third-party control. ghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, protecting paging and monitoring during AC interruptions. ecoRAIL energy management lowers operating cost in always-on deployments. With eight channels of high-Z and low-Z capability, the IX30:8 is well suited to dense multi-zone distributed audio where many independent outputs are required from limited rack space. The amplifier is configured and controlled in SONICUE Sound System Software and can act as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices. Integrators comparing models can review the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e, and reference the two-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi\u003c\/a\u003e for high-power dual-channel low-Z requirements.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 channels in 1U\u003c\/strong\u003e — Provides eight independent amplifier channels with 3 kW total power for dense multi-zone distributed audio in a single rack unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 x 16 matrix mixer\u003c\/strong\u003e — Runs a fully featured 96 kHz DSP with a 16 x 16 matrix mixer, EQ, dynamics, FIR-Drive, and Dynacord FX so external processing is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8x8 Dante networking\u003c\/strong\u003e — Provides eight Dante inputs and eight Dante outputs for distributed audio transport across a managed AV network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO with OCA\/AES70\u003c\/strong\u003e — Combines Dante audio with standards-based OCA\/AES70 remote control for IP-based monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Z and low-Z operation\u003c\/strong\u003e — Drives 70V and 100V distributed lines as well as low-impedance loudspeakers across all eight channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight mic\/line inputs\u003c\/strong\u003e — Accepts eight local mic or line sources that can also serve as Dante break-in points to the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMXE-style TaskEngine\u003c\/strong\u003e — Adds scheduling, automation, and system logic for integration with third-party control systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eghostPOWER over PoE\u003c\/strong\u003e — Maintains the DSP, Dante network, and mic\/line inputs during mains loss using IEEE 802.3af PoE on the primary port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSONICUE control server\u003c\/strong\u003e — Configured in SONICUE and able to serve WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows clients.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eBoardroom\u003c\/li\u003e\n\u003cli\u003eHouse of worship\u003c\/li\u003e\n\u003cli\u003eGovernment space\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eAuditorium\u003c\/li\u003e\n\u003cli\u003eAll-hands room\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal rated output power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplifier channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (8 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output per channel (4 Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 100 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Drive (per channel, 70 V)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output voltage (Hi-Z\/8 Ω mode, per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e145 Vpk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax output current (Lo-Z\/4 Ω mode, per channel)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e33 Apk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput stage topology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage gain (Low-Z, ref. 1 kHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 dB, adjustable 20.0 - 44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDSP sampling rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e96 kHz internal, Dante 48\/96 kHz switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMatrix mixer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 x 16 with stereo FX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker FIR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 1025 taps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork audio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 ch in \/ 8 ch out, 48\/96 kHz, Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45, 1000base-T, integrated switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMic\/line inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 (Euroblock), gain 0 to 60 dB, +48 V phantom switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackup power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eghostPOWER, 1 x PoE (IEEE 802.3af) on primary port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50 Hz to 60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature-controlled fans\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e483 x 44.1 x 447 mm (19 x 1.74 x 17 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IX30:8 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IX30:8 support Dante and OMNEO for AV system integration?\u003c\/strong\u003e\u003cbr\u003eYes. The IX30:8 provides 8x8 Dante audio transport and OMNEO with OCA\/AES70 control, so it integrates into managed Dante networks for audio routing and IP-based monitoring and configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose the 8-channel IX30:8 over a 4-channel model?\u003c\/strong\u003e\u003cbr\u003eThe IX30:8 offers eight independent amplifier channels and a 16 x 16 matrix mixer in 1U, which suits dense multi-zone distributed audio where many outputs are needed from limited rack space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive both 70V\/100V distributed lines and low-Z loudspeakers?\u003c\/strong\u003e\u003cbr\u003eYes. powerTANK technology lets each of the eight channels operate in high-Z (70V\/100V) Direct Drive mode or low-Z mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the amplifier configured and controlled?\u003c\/strong\u003e\u003cbr\u003eThe IX30:8 is configured in Dynacord SONICUE Sound System Software and can serve as a SONICUE control server for WPN1 wall panels, the TPC-1 touch panel, and iOS or Windows devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens to the system during a mains power interruption?\u003c\/strong\u003e\u003cbr\u003eghostPOWER over PoE keeps the DSP, Dante network, and mic\/line inputs active independent of mains power, preserving signal presence and network connectivity during AC loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many local inputs does it provide?\u003c\/strong\u003e\u003cbr\u003eIt has eight mic\/line inputs on Euroblock connectors with 0 to 60 dB gain and switchable +48 V phantom power, usable directly or as Dante break-in points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes Creation Networks provide support and warranty service?\u003c\/strong\u003e\u003cbr\u003eYes. Creation Networks supplies Dynacord IX series amplifiers with manufacturer warranty and can assist with product selection and AV system integration questions.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653450988,"sku":"IX30:8-US","price":5029.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/DYN-IX30-8-US_8c2a62dc-5cf0-47a7-8f36-705f3e947848.jpg?v=1781711999","url":"https:\/\/creationnetworks.net\/products\/dynacord-ix30-8-us-8-channel-3kw-networked-dsp-amplifier","provider":"Creation Networks","version":"1.0","type":"link"}