{"product_id":"dynacord-ipx20-4-4-channel-4x5000w-install-power-amplifier","title":"Dynacord IPX20:4 – 4-Channel 4x5000W Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IPX20:4 is a 4-channel, 4 x 5000 W DSP install power amplifier built for the highest-output networked audio in large-scale commercial installations. As a rack-mount amplifier with OMNEO IP networking and native Dante connectivity, it gives system designers substantial headroom for distributed audio in auditoriums and high-SPL venues. Variable Load Drive supports low-impedance and 70V\/100V\/140V direct drive on each channel, making it a high-power 4-channel installation amplifier for mixed loudspeaker systems. It is configured and controlled in IRIS-Net and SONICUE for repeatable commercial deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IPX20:4 delivers four channels of 5000 W into 4 ohms with a fully integrated 96 kHz DSP engine and FIR Drive technology in a single 2U rack-mount chassis, providing exceptional power density for demanding install applications. Each channel supports Normal and Parallel modes for low-Z and high-Z distributed audio, with Parallel mode reaching 10000 W into 2 ohms for high-SPL zones and subwoofers. Direct Drive provides 70 V, 100 V, and 140 V operation without external transformers, simplifying 70V\/100V line design in large venues. OMNEO transports Dante audio with OCA\/AES70 control over redundant PRIMARY\/SECONDARY EtherCON ports for network resilience. Onboard DSP includes user EQ, speaker EQ, FIR filtering, crossovers, delay, and peak and RMS limiters with thermal modeling per channel, plus a 30-preset speaker pool. Pilot tone supervision and source fallback maintain continuity for paging and announcement systems. Integrators configure and monitor the amplifier in IRIS-Net and SONICUE, with impedance measurement and load monitoring for commissioning and diagnostics. The IPX20:4 is part of the broader \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e and complements other DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 5000 W Multichannel Amplification\u003c\/strong\u003e — Delivers 5000 W per channel into 4 ohms for the highest-output distributed audio in large commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Each channel operates in low-impedance or 70V\/100V\/140V direct drive, supporting mixed low-Z and high-Z loudspeaker systems without external transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Power Parallel Mode\u003c\/strong\u003e — Parallel mode reaches 10000 W into 2 ohms for high-SPL zones and subwoofer applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO IP Networking with Dante\u003c\/strong\u003e — Transports networked audio over Dante with OCA\/AES70 control and redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 96 kHz DSP and FIR Drive\u003c\/strong\u003e — Native 96 kHz processing provides user EQ, speaker EQ, FIR filtering, crossovers, and delay per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Preset Speaker Pool\u003c\/strong\u003e — Stored speaker settings speed up configuration of multiple loudspeaker models across zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Channel Limiting and Protection\u003c\/strong\u003e — Peak anticipation and RMS\/temperature limiters with thermal modeling protect connected loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco Rail High-Efficiency Topology\u003c\/strong\u003e — Class D output with digitally controlled PFC supply manages operating cost and rack heat load at high output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eBroadcast studios\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Channels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Power (Normal, all channels driven, 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power (2 ohms \/ 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e5200 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParallel Mode (2 ohms \/ 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e10000 W \/ 8000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V \/ 100 V \/ 140 V)\u003c\/td\u003e\n\u003ctd\u003e3550 W \/ 5000 W \/ 5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Voltage (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e210 Vpeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Current (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e84 Apeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (Low-Z)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB, adjustable 20.0-44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD (3 dB below max, AES17, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±1.0 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor (20-200 Hz, 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise Ratio (A-weighted, analog \/ digital input)\u003c\/td\u003e\n\u003ctd\u003e115 dB \/ 118 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP Sampling Rate\u003c\/td\u003e\n\u003ctd\u003e48 kHz \/ 96 kHz, OMNEO\/Dante synchronized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e8 channels, OMNEO\/Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Type\u003c\/td\u003e\n\u003ctd\u003e2 x Neutrik EtherCON\/RJ45, redundant PRIMARY\/SECONDARY, 1000base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e2 x 6-pin Euroblock, max +21 dBu, 20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output\u003c\/td\u003e\n\u003ctd\u003e1 x 8-pin Euroblock, 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input\u003c\/td\u003e\n\u003ctd\u003e1 x Neutrik powerCON-HC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50-60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Power Consumption\u003c\/td\u003e\n\u003ctd\u003e2250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Mode\u003c\/td\u003e\n\u003ctd\u003e110 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 19 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature controlled fans, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5 °C to +40 °C (+40 °F to +105 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88.1 x 514.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e18.3 kg (40.3 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IPX20:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IPX20:4 support Dante networked audio?\u003c\/strong\u003e\u003cbr\u003eYes. The IPX20:4 uses OMNEO IP networking, which transports Dante audio with OCA\/AES70 control and provides 8 network audio input channels over redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive 70V and 100V distributed loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive provides Direct Drive operation at 70 V, 100 V, and 140 V without an external step-up transformer, alongside low-impedance 4-ohm, 2-ohm, and 8-ohm operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum output power?\u003c\/strong\u003e\u003cbr\u003eEach channel delivers 5000 W into 4 ohms in Normal mode, and Parallel mode reaches 10000 W into 2 ohms for high-SPL and subwoofer applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software is used to configure and control the amplifier?\u003c\/strong\u003e\u003cbr\u003eThe IPX20:4 is configured and controlled in IRIS-Net and SONICUE, including DSP setup, the 30-preset speaker pool, impedance measurement, and load monitoring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe amplifier is a 2U rack-mount chassis measuring 483 x 88.1 x 514.2 mm and weighing 18.3 kg (40.3 lb), with M6 rack-mount screws included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it maintain audio continuity if a source fails?\u003c\/strong\u003e\u003cbr\u003ePilot tone supervision monitors analog and OMNEO\/Dante inputs and automatically switches to an alternative source selection, supporting announcement and paging reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the IPX20:4 fit alongside other Dynacord amplifiers?\u003c\/strong\u003e\u003cbr\u003eIt complements DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e to compare models.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653713132,"sku":"IPX20:4","price":13781.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/352435.jpg?v=1781712021","url":"https:\/\/creationnetworks.net\/products\/dynacord-ipx20-4-4-channel-4x5000w-install-power-amplifier","provider":"Creation Networks","version":"1.0","type":"link"}