{"product_id":"dynacord-ipx10-4-4-channel-4x2500w-install-power-amplifier","title":"Dynacord IPX10:4 – 4-Channel 4x2500W Install Power Amplifier","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Dynacord IPX10:4 is a 4-channel, 4 x 2500 W DSP install power amplifier engineered for high-output networked audio in demanding commercial installations. As a rack-mount amplifier with OMNEO IP networking and native Dante connectivity, it gives system designers ample headroom for distributed audio across large zones. Variable Load Drive supports low-impedance and 70V\/100V\/140V direct drive on each channel, making it a versatile 4-channel installation amplifier for mixed loudspeaker systems. It is configured and controlled in IRIS-Net and SONICUE for repeatable commercial deployment.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe IPX10:4 delivers four channels of 2500 W into 4 ohms with a fully integrated 96 kHz DSP engine and FIR Drive technology in a single 2U rack-mount chassis. Each channel supports Normal, Bridge, Parallel, and Parallel-Bridge modes for low-Z and high-Z distributed audio, with Parallel-Bridge reaching 10000 W into 4 ohms for high-SPL applications. Direct Drive provides 70 V, 100 V, and 140 V (200 V in bridge) operation without external transformers, simplifying 70V\/100V line design in larger venues. OMNEO transports Dante audio with OCA\/AES70 control over redundant PRIMARY\/SECONDARY EtherCON ports for network resilience. Onboard DSP includes user EQ, speaker EQ, FIR filtering, crossovers, delay, and peak and RMS limiters with thermal modeling per channel. Pilot tone supervision and source fallback maintain continuity for paging and announcement systems. Integrators configure and monitor the amplifier in IRIS-Net and SONICUE, with impedance measurement and load monitoring for commissioning and diagnostics. The IPX10:4 belongs to the broader \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord amplifier collection\u003c\/a\u003e and complements other DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 x 2500 W Multichannel Amplification\u003c\/strong\u003e — Delivers 2500 W per channel into 4 ohms for high-output distributed audio in large commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Load Drive (VLD)\u003c\/strong\u003e — Each channel operates in low-impedance or 70V\/100V\/140V direct drive, supporting mixed low-Z and high-Z loudspeaker systems without external transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Power Bridge and Parallel Modes\u003c\/strong\u003e — Parallel-Bridge mode reaches 10000 W into 4 ohms for high-SPL zones and subwoofer applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOMNEO IP Networking with Dante\u003c\/strong\u003e — Transports networked audio over Dante with OCA\/AES70 control and redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 96 kHz DSP and FIR Drive\u003c\/strong\u003e — Native 96 kHz processing provides user EQ, speaker EQ, FIR filtering, crossovers, and delay per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-Channel Limiting and Protection\u003c\/strong\u003e — Peak anticipation and RMS\/temperature limiters with thermal modeling protect connected loudspeakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot Tone Supervision and Source Fallback\u003c\/strong\u003e — Monitors analog and OMNEO\/Dante inputs and switches to an alternative source for announcement continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco Rail High-Efficiency Topology\u003c\/strong\u003e — Class D output with digitally controlled PFC supply lowers operating cost and rack heat load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAuditoriums\u003c\/li\u003e\n\u003cli\u003eHouses of worship\u003c\/li\u003e\n\u003cli\u003eMulti-purpose rooms\u003c\/li\u003e\n\u003cli\u003eGovernment and commercial meeting spaces\u003c\/li\u003e\n\u003cli\u003eAll-hands rooms\u003c\/li\u003e\n\u003cli\u003eConference rooms and boardrooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;min-width:520px;\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Channels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Power (Normal, all channels driven, 4 ohms)\u003c\/td\u003e\n\u003ctd\u003e2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power (8 ohms)\u003c\/td\u003e\n\u003ctd\u003e1250 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Mode (4 ohms \/ 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e5200 W \/ 5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParallel-Bridge (4 ohms)\u003c\/td\u003e\n\u003ctd\u003e10000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (70 V \/ 100 V)\u003c\/td\u003e\n\u003ctd\u003e2500 W \/ 2500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDirect Drive (140 V \/ 200 V bridge)\u003c\/td\u003e\n\u003ctd\u003e5000 W \/ 5000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Voltage (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e150 Vpeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Output Current (Normal, per channel)\u003c\/td\u003e\n\u003ctd\u003e53 Apeak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Gain (Low-Z)\u003c\/td\u003e\n\u003ctd\u003e32.0 dB, adjustable 20.0-44.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD (3 dB below max, AES17, 1 kHz)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.05 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz (±0.5 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping Factor (20-200 Hz, 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Stage Topology\u003c\/td\u003e\n\u003ctd\u003eClass D, fixed frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise Ratio (A-weighted, digital input)\u003c\/td\u003e\n\u003ctd\u003e115 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSP Sampling Rate\u003c\/td\u003e\n\u003ctd\u003e48 kHz \/ 96 kHz, OMNEO\/Dante synchronized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Audio Inputs\u003c\/td\u003e\n\u003ctd\u003e8 channels, OMNEO\/Dante\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Type\u003c\/td\u003e\n\u003ctd\u003e2 x Neutrik EtherCON\/RJ45, redundant PRIMARY\/SECONDARY, 1000base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Audio Input\u003c\/td\u003e\n\u003ctd\u003e2 x 6-pin Euroblock, max +21 dBu, 20 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeaker Output\u003c\/td\u003e\n\u003ctd\u003e1 x 8-pin Euroblock, 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input\u003c\/td\u003e\n\u003ctd\u003e1 x Neutrik powerCON-HC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e100 V to 240 V, 50-60 Hz AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Power Consumption\u003c\/td\u003e\n\u003ctd\u003e1200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdle Mode\u003c\/td\u003e\n\u003ctd\u003e80 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 16 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eFront-to-rear, temperature controlled fans, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Limits\u003c\/td\u003e\n\u003ctd\u003e+5 °C to +40 °C (+40 °F to +105 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e483 x 88.1 x 514.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15.0 kg (33.0 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp style=\"font-size:0.85em;\"\u003eSpecifications sourced from the Dynacord IPX10:4 datasheet. Data subject to change without notice.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the IPX10:4 support Dante networked audio?\u003c\/strong\u003e\u003cbr\u003eYes. The IPX10:4 uses OMNEO IP networking, which transports Dante audio with OCA\/AES70 control and provides 8 network audio input channels over redundant PRIMARY\/SECONDARY EtherCON ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it drive 70V and 100V distributed loudspeaker lines?\u003c\/strong\u003e\u003cbr\u003eYes. Variable Load Drive provides Direct Drive operation at 70 V, 100 V, and 140 V (200 V in bridge mode) without an external step-up transformer, alongside low-impedance 4-ohm and 8-ohm operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat software is used to configure and control the amplifier?\u003c\/strong\u003e\u003cbr\u003eThe IPX10:4 is configured and controlled in IRIS-Net and SONICUE, including DSP setup, impedance measurement, and load monitoring for commissioning and diagnostics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much rack space does it require?\u003c\/strong\u003e\u003cbr\u003eThe amplifier is a 2U rack-mount chassis measuring 483 x 88.1 x 514.2 mm and weighing 15.0 kg (33.0 lb), with M6 rack-mount screws included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the maximum output in high-power modes?\u003c\/strong\u003e\u003cbr\u003eIn Parallel-Bridge mode the IPX10:4 delivers up to 10000 W into 4 ohms, with Bridge mode providing 5200 W into 4 ohms for high-SPL applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it maintain audio continuity if a source fails?\u003c\/strong\u003e\u003cbr\u003ePilot tone supervision monitors analog and OMNEO\/Dante inputs and automatically switches to an alternative source selection, supporting announcement and paging reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the IPX10:4 fit alongside other Dynacord amplifiers?\u003c\/strong\u003e\u003cbr\u003eIt complements DSP install amplifiers such as the \u003ca href=\"https:\/\/creationnetworks.net\/products\/dynacord-c3600fdi-dsp-power-amplifier\"\u003eDynacord C3600FDi DSP power amplifier\u003c\/a\u003e. Browse the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/dynacord\"\u003eDynacord collection\u003c\/a\u003e to compare models.\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":47741653549292,"sku":"IPX10:4","price":9738.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/352425.jpg?v=1781712012","url":"https:\/\/creationnetworks.net\/products\/dynacord-ipx10-4-4-channel-4x2500w-install-power-amplifier","provider":"Creation Networks","version":"1.0","type":"link"}