{"product_id":"crestron-din-kxi","title":"Crestron DIN-KXI – KNX Secure IP Gateway, DIN Rail Mount","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron DIN-KXI is a KNXnet\/IP gateway that bridges a Crestron 4-Series control system to a KNX TP (Twisted Pair) bus installation. It mounts on a standard 35 mm DIN rail in a 1M (18 mm) wide form factor, occupying a single module slot in a DIN enclosure. The DIN-KXI supports KNXnet\/IP Security (AES-128) and is capable of addressing up to 1,000 KNX datapoints through up to 8 simultaneous tunneling connections.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe DIN-KXI provides Ethernet-based access to the KNX bus, allowing a Crestron control system — or a KNX programming workstation running ETS5 or ETS6 — to communicate with any KNX-compliant device on the TP bus without requiring physical proximity to the DIN rail enclosure. This remote programming capability reduces field labor on large or multi-floor KNX installations. The device draws power directly from the KNX bus (20 mA), eliminating the need for a separate power supply.\u003c\/p\u003e\u003cp\u003eKNX Security (AES-128) can be enabled through ETS software to protect the KNX bus against unauthorized access, which is increasingly relevant in commercial building applications subject to cybersecurity requirements. The DIN-KXI's front panel includes push buttons and LEDs for on-device programming mode selection, BAOS connection selection (up to 10), and tunnel connection selection (up to 5), providing local diagnostics and configuration without a laptop connection.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEthernet-to-KNX TP bridge for Crestron 4-Series control system integration\u003c\/li\u003e\n\u003cli\u003eSupports KNXnet\/IP Security (AES-128) — configurable via ETS software\u003c\/li\u003e\n\u003cli\u003eControls up to 1,000 KNX datapoints across up to 8 simultaneous tunneling connections\u003c\/li\u003e\n\u003cli\u003ePowers entirely from the KNX bus — no external power supply required\u003c\/li\u003e\n\u003cli\u003e1M (18 mm) wide DIN EN 60715 rail mount, DIN 43880 compliant form factor\u003c\/li\u003e\n\u003cli\u003eCompatible with KNX ETS5 and ETS6 programming and diagnostic software\u003c\/li\u003e\n\u003cli\u003eOn-board push buttons and LEDs for Programming mode, BAOS (up to 10), and Tunnel (up to 5) connection selection\u003c\/li\u003e\n\u003cli\u003eLAN port: (1) 8-pin RJ-45, 100BASE-TX with DHCP enabled by default\u003c\/li\u003e\n\u003cli\u003eKNX connectors: (2) push-in style 4-conductor bus connectors for TP wiring\u003c\/li\u003e\n\u003cli\u003eCE certified; compact 90 x 18 x 62 mm form factor weighing only 40 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCrestron 4-Series control system integration with KNX lighting, HVAC, shading, or energy management installations in commercial buildings\u003c\/li\u003e\n\u003cli\u003eOffice buildings and campus environments where KNX infrastructure is already deployed and Crestron is added as the primary control layer\u003c\/li\u003e\n\u003cli\u003eRemote KNX bus programming and diagnostics via LAN without requiring direct physical access to the DIN enclosure\u003c\/li\u003e\n\u003cli\u003eNew commercial construction where KNX is specified for building systems and Crestron is specified for AV and room control\u003c\/li\u003e\n\u003cli\u003eHospitality and multi-tenant buildings with mixed Crestron and KNX subsystems requiring unified automation control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eKNX bus powered, 20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKNX Communication\u003c\/td\u003e\n\u003ctd\u003eKNX over TP (Twisted Pair); cEMI interface protocol; Max. APDU length: 55; Device model: System B; KNXnet\/IP Security (AES-128); ETS5 and ETS6 compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Communication\u003c\/td\u003e\n\u003ctd\u003eARP, ICMP, IGMP, UDP\/IP, TCP\/IP, DHCP, Auto IP; DHCP enabled by default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLAN Port\u003c\/td\u003e\n\u003ctd\u003e(1) 8-pin RJ-45 female, 100BASE-TX; green and yellow status LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKNX Connectors\u003c\/td\u003e\n\u003ctd\u003e(2) 4-conductor push-in KNX bus connectors; accepts 0.6-0.8 mm (22-20 AWG) solid-core twisted pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Datapoints\u003c\/td\u003e\n\u003ctd\u003e1,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Simultaneous Tunneling\u003c\/td\u003e\n\u003ctd\u003e8 (up to 5 TUNN, up to 10 BAOS connections)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDIN Rail Form Factor\u003c\/td\u003e\n\u003ctd\u003e1M (18 mm) wide; DIN EN 60715, DIN 43880 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e90 mm H x 18 mm W x 62 mm D (3.55 x 0.71 x 2.44 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e40 g (1.41 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-5° to 45°C (23° to 113°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e5% to 93% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eLight gray polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eDoes the DIN-KXI require a separate power supply?\u003c\/dt\u003e\n\u003cdd\u003eNo. The DIN-KXI draws power directly from the KNX TP bus at 20 mA. No external 24V power supply is required, provided the KNX line power supply has sufficient spare current capacity for the gateway.\u003c\/dd\u003e\n\u003cdt\u003eHow many KNX devices can be controlled through the DIN-KXI?\u003c\/dt\u003e\n\u003cdd\u003eThe DIN-KXI supports up to 1,000 KNX datapoints across the connected KNX TP line. The number of physical KNX devices depends on the datapoint count per device and the capacity of the KNX TP line infrastructure, not a hard device count limit in the gateway itself.\u003c\/dd\u003e\n\u003cdt\u003eIs ETS software required on-site to configure the DIN-KXI?\u003c\/dt\u003e\n\u003cdd\u003eETS5 or ETS6 software is required for initial configuration, enabling KNX Security, and selecting the operational modes for BAOS and Tunnel connections. Once configured, the device operates autonomously and does not require ongoing ETS access for normal Crestron control system operation.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":47759581610220,"sku":"DIN-KXI","price":630.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/master_photo_a-DIN-KXI.png?v=1781795375","url":"https:\/\/creationnetworks.net\/products\/crestron-din-kxi","provider":"Creation Networks","version":"1.0","type":"link"}