{"product_id":"crestron-clt-2dimflv8","title":"Crestron CLT-2DIMFLV8 – Terminal Block for CLX-2DIMFLV8 0-10V Dimmer Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron CLT-2DIMFLV8 is the color-coded field wiring terminal block for the CLX-2DIMFLV8 eight-channel 0-10V fluorescent\/LED dimming module. It installs inside a CAEN or CAEN-MLO enclosure prior to the dimming module itself, allowing electricians to complete and test all line-voltage wiring before the control module is installed.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe CLT-2DIMFLV8 separates the field wiring task from the module installation task, which reduces risk during electrical rough-in. The terminal block accepts two single-phase power feeds and provides screw-terminal connections for the line, neutral, and load wires for all eight dimmer channels. Bypass jumpers are pre-installed on the terminal block to maintain circuit continuity during wiring and testing. These jumpers must remain in place until all wiring has been verified and the CLX-2DIMFLV8 module is ready to install. Color coding on the terminal block guides correct wire placement and matches the wiring labels supplied for single-wide and double-wide enclosures. The terminal block is used with both the CLX-2DIMFLV8 (120 VAC) and CLX-2DIMFLV8-277 (277 VAC) dimming modules.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eColor-coded terminal block simplifies field wiring for the CLX-2DIMFLV8 dimmer module\u003c\/li\u003e\n\u003cli\u003eAccepts two single-phase power feeds (can be same or different phases)\u003c\/li\u003e\n\u003cli\u003eConnects to 14–10 AWG copper conductors rated 75°C or greater\u003c\/li\u003e\n\u003cli\u003ePre-installed bypass jumpers maintain circuit continuity during installation and wiring testing\u003c\/li\u003e\n\u003cli\u003eCompatible with both 120 VAC and 277 VAC CLX-2DIMFLV8 module variants\u003c\/li\u003e\n\u003cli\u003eWorks with CAEN and CAEN-MLO enclosures for centralized lighting panel installation\u003c\/li\u003e\n\u003cli\u003eAdhesive wiring labels included for left-side and right-side double-wide enclosure layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCentralized Crestron lighting control panels using CLX-2DIMFLV8 modules in CAEN enclosures\u003c\/li\u003e\n\u003cli\u003eRetrofit or new-construction installations requiring pre-wired terminal blocks for phased commissioning\u003c\/li\u003e\n\u003cli\u003eCommercial and residential lighting control where multiple 0-10V fluorescent or LED circuits are controlled from a single enclosure\u003c\/li\u003e\n\u003cli\u003eInstallations requiring separate electrical rough-in and controls finish phases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: CLT-2DIMFLV8\u003c\/li\u003e\n\u003cli\u003eCompatible Module: CLX-2DIMFLV8 (120 VAC), CLX-2DIMFLV8-277 (277 VAC)\u003c\/li\u003e\n\u003cli\u003eCompatible Enclosures: CAEN series, CAEN-MLO series\u003c\/li\u003e\n\u003cli\u003eWire Size: 14–10 AWG copper, rated 75°C minimum\u003c\/li\u003e\n\u003cli\u003eTerminal Torque: 9 in-lb (line\/load); 35–45 in-lb (ground bus, depending on wire gauge)\u003c\/li\u003e\n\u003cli\u003eCertifications: UL Listed (with CLX-2DIMFLV8 module)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQs\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eCan the CLT-2DIMFLV8 terminal block be wired before the module is installed?\u003c\/dt\u003e\n\u003cdd\u003eYes. That is its primary purpose. The terminal block installs first and allows all line-voltage wiring to be completed and tested with bypass jumpers in place. The CLX-2DIMFLV8 module installs after all wiring has been verified and the bypass jumpers are removed from the black and red sections.\u003c\/dd\u003e\n\u003cdt\u003eDoes the CLT-2DIMFLV8 work in double-wide CAEN enclosures?\u003c\/dt\u003e\n\u003cdd\u003eYes. The terminal block is compatible with both single-wide and double-wide CAEN enclosures. In double-wide enclosures, the module is rotated 180 degrees when installed on the right side, and right-side adhesive wiring labels (included) are used.\u003c\/dd\u003e\n\u003cdt\u003eIs this terminal block sold with the CLX-2DIMFLV8 module?\u003c\/dt\u003e\n\u003cdd\u003eNo. The CLT-2DIMFLV8 terminal block is sold separately from the CLX-2DIMFLV8 dimmer module. Both components are required for a complete installation in a CAEN enclosure.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":47759569420524,"sku":"CLT-2DIMFLV8","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/master_photo_a-CLT-2DIMFLV8.png?v=1781794940","url":"https:\/\/creationnetworks.net\/products\/crestron-clt-2dimflv8","provider":"Creation Networks","version":"1.0","type":"link"}