{"product_id":"crestron-aud-ext-100","title":"Crestron AUD-EXT-100 – Audio over CAT5 Extender, One Stereo Signal","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron AUD-EXT-100 extends a single unbalanced stereo analog audio signal up to 2,000 feet using standard CAT5 or better UTP cable. It consists of one transmitter and one receiver, both completely passive with no power required, making it a cost-effective and reliable solution for distributing audio signals across large facilities.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eAV designers and integrators use the AUD-EXT-100 to transport unbalanced stereo line-level audio over existing or new CAT5 infrastructure without the cost or complexity of active signal processors. Because both units are passive, there are no power supplies to source or fail in the field. The extender delivers professional-quality audio performance with bandwidth from 20 Hz to 20 kHz, THD+N below 0.1%, and a signal-to-noise ratio above 100 dB.\u003c\/p\u003e\u003cp\u003eEach unit features an RJ-45 port for the CAT5 extension run and a pair of RCA connectors for the unbalanced stereo line-level audio connection. The aluminum chassis includes integral mounting flanges so units can be mounted to a flat surface, to a single rack rail, or positioned freestanding. Three AUD-EXT units fit side by side on a standard 1U 19-inch rack shelf.\u003c\/p\u003e\u003cp\u003eThe AUD-EXT-100 is ideal as an audio return channel in Crestron Sonnex multiroom audio systems. Shop the full AUD-EXT Series at Creation Networks: \u003ca href=\"https:\/\/www.creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends one unbalanced stereo audio signal up to 2,000 ft (610 m) via CAT5 or better UTP cable\u003c\/li\u003e\n\u003cli\u003eCompletely passive — no power supply required for either transmitter or receiver unit\u003c\/li\u003e\n\u003cli\u003eAudio bandwidth: 20 Hz to 20 kHz; THD+N: less than 0.1% at 20 Hz, 2 Vrms\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: greater than 100 dB; Crosstalk: less than -70 dB\u003c\/li\u003e\n\u003cli\u003eRJ-45 CAT5 extension port and RCA stereo connectors on both transmitter and receiver\u003c\/li\u003e\n\u003cli\u003eAluminum chassis with integral mounting flanges for surface, rack rail, or freestanding installation\u003c\/li\u003e\n\u003cli\u003eThree units fit side by side on a standard 1U 19-inch rack shelf\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAudio return channels in Crestron Sonnex multiroom audio distribution systems\u003c\/li\u003e\n\u003cli\u003eExtending a stereo source from a head-end equipment room to a remote zone amplifier or zone input\u003c\/li\u003e\n\u003cli\u003eDistributing audio in commercial facilities, hospitality venues, or large residences where source and output are separated by long cable runs\u003c\/li\u003e\n\u003cli\u003eAdding analog audio infrastructure to existing CAT5 structured wiring plants\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Type:\u003c\/strong\u003e One unbalanced stereo line-level audio (per unit direction)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Extension Distance:\u003c\/strong\u003e 2,000 ft (610 m) via CAT5 or better UTP cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBandwidth:\u003c\/strong\u003e 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e Less than 0.1% at 20 Hz, 2 Vrms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS\/N Ratio:\u003c\/strong\u003e Greater than 100 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrosstalk:\u003c\/strong\u003e Less than -70 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 10k Ohms; Maximum Input Level: 2 Vrms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 100 Ohms; Maximum Output Level: 2 Vrms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter Connectors:\u003c\/strong\u003e (1) RJ-45 female CAT5 output; (1) pair RCA female stereo input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Connectors:\u003c\/strong\u003e (1) RJ-45 female CAT5 input; (1) pair RCA female stereo output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Passive — no power required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e Aluminum with polycarbonate label overlay and integral mounting flanges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (each unit):\u003c\/strong\u003e 5.12 in W x 3.79 in D x 1.68 in H (131 mm x 97 mm x 43 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Freestanding, surface mount, or single rack rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e 41 to 122F (5 to 50C); 10% to 90% RH noncondensing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eDoes the AUD-EXT-100 work with digital S\/PDIF audio signals?\u003c\/dt\u003e\n\u003cdd\u003eNo. The AUD-EXT-100 extends only one unbalanced analog stereo signal. For S\/PDIF digital audio extension, use the AUD-EXT-201 model instead.\u003c\/dd\u003e\n\u003cdt\u003eIs any configuration or setup required after connecting the transmitter and receiver?\u003c\/dt\u003e\n\u003cdd\u003eNo. Both units are completely passive and require no configuration. Connect the audio source to the transmitter RCA inputs, run a CAT5 (or better) cable to the receiver, and connect the receiver RCA outputs to the destination device.\u003c\/dd\u003e\n\u003cdt\u003eCan the AUD-EXT-100 be used with Crestron DM or other CAT-based signal extension technologies?\u003c\/dt\u003e\n\u003cdd\u003eNo. AUD-EXT CAT5 extension technology is not compatible with Crestron Sonnex Link, Crestron Home, DigitalMedia (DM), or other CAT-based signal extension systems.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":47759557886188,"sku":"AUD-EXT-100","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/master_photo_a-aud-ext.png?v=1781793033","url":"https:\/\/creationnetworks.net\/products\/crestron-aud-ext-100","provider":"Creation Networks","version":"1.0","type":"link"}