{"product_id":"crestron-adpt-usb-enet","title":"Crestron ADPT-USB-ENET – USB-to-Ethernet Adapter for Crestron Flex","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Crestron ADPT-USB-ENET is a USB-to-Ethernet adapter that provides a direct wired network connection between a Crestron Flex UC-ENGINE or UC-ENGINE-SD and the Crestron control interface in a Crestron Flex unified communications system. It eliminates the need for wireless network configuration in UC system deployments.\u003c\/p\u003e\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eIn Crestron Flex deployments, the UC-ENGINE compute module and the Crestron control interface must communicate over a network connection. The ADPT-USB-ENET creates this connection directly — USB-A connects to the UC-ENGINE and RJ-45 connects to a LAN port on the control interface — bypassing the need to configure the UC-ENGINE for Wi-Fi or provision it on the building network separately. This reduces deployment time and removes a potential point of failure from the system.\u003c\/p\u003e\u003cp\u003eThe adapter supports up to 100 Mbps transfer speed and includes LED indicators for connection status and data transfer activity. It is a plug-and-play device requiring no drivers or configuration. A CAT5 or better Ethernet cable (sold separately) is required to connect the RJ-45 port to the control interface.\u003c\/p\u003e\u003cp\u003eDimensions: 1.0 in W x 2.2 in D x 0.6 in H, plus a 6-inch USB cord. Available from Creation Networks at \u003ca href=\"https:\/\/www.creationnetworks.net\"\u003ecreationnetworks.net\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProvides a direct USB-to-Ethernet connection between a UC-ENGINE or UC-ENGINE-SD and a Crestron Flex control interface\u003c\/li\u003e\n\u003cli\u003eSupports up to 100 Mbps transfer speed for reliable intra-system communication\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation — no drivers or network configuration required\u003c\/li\u003e\n\u003cli\u003eLED indicators for connection status and data transfer diagnostics\u003c\/li\u003e\n\u003cli\u003eCompact form factor: 1.0 in W x 2.2 in D x 0.6 in H, with a 6-inch USB cord\u003c\/li\u003e\n\u003cli\u003eEliminates dependency on Wi-Fi or local network infrastructure for UC-ENGINE to control interface communication\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCrestron Flex conference room deployments using a UC-ENGINE or UC-ENGINE-SD as the conferencing compute module\u003c\/li\u003e\n\u003cli\u003eInstallations where network security policies restrict Wi-Fi use by UC compute devices\u003c\/li\u003e\n\u003cli\u003eRapid deployment scenarios where provisioning the UC-ENGINE on the building network would introduce delay\u003c\/li\u003e\n\u003cli\u003eAny Crestron Flex system where a direct wired link between the UC-ENGINE and Flex control interface is preferred\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e USB-to-Ethernet adapter for UC-ENGINE to Crestron Flex control interface connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransfer Speed:\u003c\/strong\u003e Up to 100 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Connector:\u003c\/strong\u003e USB-A male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Connector:\u003c\/strong\u003e RJ-45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators:\u003c\/strong\u003e LED for connection and data transfer status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.0 in W x 2.2 in D (plus 6 in cord) x 0.6 in H (25 mm x 56 mm plus 152 mm cord x 15 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Plug-and-play, no configuration required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e UC-ENGINE, UC-ENGINE-SD\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003eDoes the ADPT-USB-ENET require a separate Ethernet cable to complete the connection?\u003c\/dt\u003e\n\u003cdd\u003eYes. A CAT5 or better Ethernet cable (sold separately) is required to connect the ADPT-USB-ENET RJ-45 port to the LAN port on the Crestron Flex control interface.\u003c\/dd\u003e\n\u003cdt\u003eIs this adapter compatible with all Crestron Flex systems?\u003c\/dt\u003e\n\u003cdd\u003eThe ADPT-USB-ENET is designed for use with Crestron Flex systems that include a UC-ENGINE or UC-ENGINE-SD compute module. It is not intended for use as a general-purpose USB-to-Ethernet adapter for other Crestron or non-Crestron devices.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":47759557558508,"sku":"ADPT-USB-ENET","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/master_photo_a_ADPT-USB-ENET.png?v=1781792823","url":"https:\/\/creationnetworks.net\/products\/crestron-adpt-usb-enet","provider":"Creation Networks","version":"1.0","type":"link"}