The Desono C-IC6 is a low-profile, two-way passive coaxial loudspeaker optimized for speech reproduction in conferencing applications. Designed with the installer in mind, the C-IC6 loudspeaker supports audio connections via either standard category cable or traditional speaker cable. They can be blind-mounted from below the ceiling, and feature a magnetic grille for easy toolless installation and removal. The grille plates are available in white, black, or red, or can be painted to match the room decor. The C-IC6 also directly integrates with the Tesira AMP-450BP — a four-channel “backpack” PoE+ amplifier — which reduces wiring requirements and installation time. The Desono C-IC6 loudspeakers are an ideal choice for any conferencing space that demands superior speech reproduction.
- Low profile passive loudspeaker, less than 6 inches (155 mm) total depth
- Supports both CAT cables and standard speaker wiring
- Designed to be integrated with the AMP-450BP (backpack PoE+ amplifier)
- 8-ohm nominal impedance allows for daisy chaining
- Bridge-mounted 1-inch soft dome tweeter
- 2-way 6.5” treated paper woofer, mechanically isolated and independent of tweeter
- 130-degree coverage optimized for low ceilings
- 60W with a peak power of 120W
DATA SHEET
| Connectors |
4-pole Euroblock connector for two pair of parallel connections; Two RJ-45 connectors |
| Nominal Impedance |
8Ω |
| Transducers |
Low Frequency: 6.5" (165 mm) treated paper cone woofer
High Frequency: 1" (25 mm) plastic dome bridge-mounted tweeter |
| Frequency Response (-10dB) |
60Hz - 20kHz |
| Output Power Rating |
60W continuous; 120W peak |
| Sensitivity (1W/1m) |
87dB SPL |
| Maximum SPL |
106dB |
| Coverage Angle |
130° |
| Operating Environment |
Designed for indoor use in climate-controlled environments |
| Compliance |
UL and C-UL listed (USA and Canada) CE Marked (Europe) RoHS Directive (Europe) Evaluated to the requirements of UL 1480a and UL 2043 and is suitable for use in air handling spaces |
| Included Accessories |
C Ring, Tile Bridge, Paintable Metal Grill |
| Cutout Diameter |
9.75" (248 mm) |
| Dimensions (Dia x D) |
11.2" (284 mm) x 5.9" (151 mm) |
| Weight |
7.8 lbs (3.5 kg) |
Skip to content