{"product_id":"biamp-920-01986-00001-voltera-d-600-4m","title":"Biamp 920-01986-00001 Voltera D 600.4M","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Biamp Voltera D 600.4M is a four-channel networked amplified loudspeaker controller that pairs 600 W of Class D amplification with a fully programmable onboard DSP in a single rack unit. It is built for commercial AV integrators outfitting smaller rooms that still need distributed loudspeaker zones and full processing. As a rack-mount DSP amplifier, the Voltera D 600.4M drives low-impedance, 70V, or 100V loudspeakers and supports AVB, Dante, and AES67 for networked audio. Onboard processing lets it replace an external DSP, where that saving has the greatest proportional impact on system cost.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Voltera D 600.4M delivers 600 W across four channels, supplying 150 W per channel with all channels driven. Despite its compact power rating, it carries the same fully programmable DSP with headroom equivalent to a TesiraFORTÉ found across the Voltera D M line, so a single chassis handles amplification and loudspeaker processing in smaller commercial audio systems. Each channel drives 2.7, 4, 8, or 16 ohm loads as well as 70V and 100V constant-voltage lines, applied from the loudspeaker profile chosen during commissioning. Power sharing allows up to 100% of total power through any single channel, reaching 450 W at 100V, so one output can carry a heavier load. The amplifier is 100% software configurable through Biamp Tesira or VenueTune, and the ALAMOS profile library covers more than 200 Biamp models to speed setup. Distributed processing means system cost scales with power requirements rather than a central resource. The unit can be sustained through PoE+ so the processor stays online without a reboot during a mains power loss, and it supports failover-to-analog operation. Integrators can compare the higher-power \u003ca href=\"https:\/\/creationnetworks.net\/products\/biamp-920-01982-00001-voltera-d-1200-4m\"\u003eVoltera D 1200.4M\u003c\/a\u003e and the two-channel \u003ca href=\"https:\/\/creationnetworks.net\/products\/biamp-920-01984-00001-voltera-d-1200-2m\"\u003eVoltera D 1200.2M\u003c\/a\u003e, or view the full \u003ca href=\"https:\/\/creationnetworks.net\/collections\/biamp\"\u003eBiamp collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 W Across Four Channels\u003c\/strong\u003e — The amplifier delivers 600 W total with all channels driven, supplying 150 W per channel for smaller distributed systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Programmable DSP\u003c\/strong\u003e — A fully programmable DSP with headroom equivalent to a TesiraFORTÉ handles loudspeaker processing without a separate processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetworked Audio Support\u003c\/strong\u003e — The unit supports AVB, Dante, and AES67 over two 1000Base-T ports in converged, split, or redundant network modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Sharing\u003c\/strong\u003e — Power sharing delivers up to 100% of total power through any single channel, reaching 450 W at 100V on one output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Output Drive\u003c\/strong\u003e — Every channel drives 2.7, 4, 8, and 16 ohm low-impedance loads as well as 70V and 100V constant-voltage lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE+ Processor Sustain\u003c\/strong\u003e — When port 1 is connected to a PoE+ switch on a UPS, the processor stays online through a mains power loss without rebooting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALAMOS Profile Library\u003c\/strong\u003e — Nearly 700 loudspeaker profiles covering more than 200 Biamp models speed commissioning in Tesira or VenueTune.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Rack Unit\u003c\/strong\u003e — The 1 RU chassis provides four channels and full DSP where rack space is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHuddle room\u003c\/li\u003e\n\u003cli\u003eConference room\u003c\/li\u003e\n\u003cli\u003eMulti-purpose room\u003c\/li\u003e\n\u003cli\u003eTraining room\u003c\/li\u003e\n\u003cli\u003eCommercial meeting space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;min-width:320px;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ SKU\u003c\/td\u003e\n\u003ctd\u003eVoltera D 600.4M \/ 920-01986-00001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier channels\u003c\/td\u003e\n\u003ctd\u003e4 (Class D)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal output, all channels driven\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per channel, all channels driven\u003c\/td\u003e\n\u003ctd\u003e150 W (70\/100V, 16, 8, 4, 2.7 ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power per channel (power sharing)\u003c\/td\u003e\n\u003ctd\u003e450 W at 100V; 450 W at 70V; 450 W at 8 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum output voltage\u003c\/td\u003e\n\u003ctd\u003e145 Vpk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum output current\u003c\/td\u003e\n\u003ctd\u003e23 Apk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetworked media formats\u003c\/td\u003e\n\u003ctd\u003eDante, AES67, AVB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork ports\u003c\/td\u003e\n\u003ctd\u003e2 x 1000Base-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample rates\u003c\/td\u003e\n\u003ctd\u003e48 and 96 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e+\/-0.5 dB (20 Hz - 20 kHz, 8 ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e117 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration software\u003c\/td\u003e\n\u003ctd\u003eBiamp Tesira, VenueTune\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e1.7 x 17.5 x 16.9 in (44 x 444 x 430 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e17 lbs (7.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e100-240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"color:#888;font-size:0.9em;\"\u003eSpecifications sourced from the Biamp Voltera D M amplified loudspeaker controller data sheet (rev. 0925). Confirm detailed specifications against current Biamp documentation.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Voltera D 600.4M require a separate DSP?\u003c\/strong\u003e\u003cbr\u003eNo. It includes the same fully programmable onboard DSP found across the Voltera D M line, with headroom equivalent to a TesiraFORTÉ, so in many designs it replaces an external processor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 600 W enough for a small commercial room?\u003c\/strong\u003e\u003cbr\u003eFor huddle rooms, conference rooms, and other smaller spaces with distributed loudspeakers, 600 W across four channels typically provides ample headroom, and power sharing lets one channel draw more when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich loudspeakers can it drive?\u003c\/strong\u003e\u003cbr\u003eEach channel drives 2.7, 4, 8, and 16 ohm low-impedance loads as well as 70V and 100V constant-voltage lines, set through the loudspeaker profile chosen during configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat audio networks does it support?\u003c\/strong\u003e\u003cbr\u003eIt supports AVB, Dante, and AES67 over two 1000Base-T ports and can run in converged, split, or redundant network modes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stay online during a power outage?\u003c\/strong\u003e\u003cbr\u003eIf port 1 is connected to a PoE+ switch backed by a UPS, the processor is sustained through a mains power loss without rebooting, and the unit supports failover-to-analog operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it need?\u003c\/strong\u003e\u003cbr\u003eThe chassis occupies a single rack unit (1 RU) and ships with a rear support kit for 19-inch rack mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty and compliance does it carry?\u003c\/strong\u003e\u003cbr\u003eThe Voltera D M series carries a 5-year warranty and is compliant with the US Trade Agreement Act (TAA).\u003c\/p\u003e","brand":"Biamp","offers":[{"title":"Default Title","offer_id":47945543188716,"sku":"920-01986-00001","price":3922.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/7982\/4364\/files\/unnamed_0e0836e1-94dd-4748-a210-5cc2e6733946.png?v=1784728942","url":"https:\/\/creationnetworks.net\/products\/biamp-920-01986-00001-voltera-d-600-4m","provider":"Creation Networks","version":"1.0","type":"link"}